A. Siegmann

Bio: A. Siegmann is an academic researcher from Technion – Israel Institute of Technology. The author has contributed to research in topics: Polyaniline & Polymer blend. The author has an hindex of 7, co-authored 9 publications receiving 340 citations.

Conductive Blends of Thermally Dodecylbenzene Sulfonic Acid-Doped Polyaniline with Thermoplastic Polymers

Abstract: In the present study, a conductive polyaniline-dodecyl benzene sulfonic acid (PANI-DBSA) complex, prepared by a thermal doping process, and its blends with thermoplastic polymers, prepared by melt processing, were investigated. PANI- DBSA characterization included conductivity measurements, morphology, crystallogra- phy, and thermal behavior. The blends' investigation focused on the morphology and the interaction between the components and on the resulting electrical conductivity. The level of interaction between the PANI and the matrix polymer determines the blend morphology and, thus, its electrical conductivity. Similar solubility parameters of the two polymeric components are necessary for a high level of PANI dispersion within the matrix polymer and, thus, enable the formation of conducting paths at low PANI content. The morphology of these blends is described by a two-structure hier- archy: (a) a primary structure, composed of small dispersed polyaniline particles, and (b) a short-range fine fibrillar structure, interconnecting the dispersed particles. q 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 243-253, 1997

Thermal dynamic processing of polyaniline with dodecylbenzene sulfonic acid

Abstract: To attain an intrinsically conductive and processible polymer, polyaniline (PANI)/dodecylbenzene sulfonic acid (DBSA) blends of several compositions were processed at various elevated temperatures in a Brabender plastograph. The blends' temperatures during processing, as affected by the blends' composition and initial process temperature, were monitored. Accordingly, the process includes the following main stages: heating the blend, exothermic PANI-DBSA doping reaction accompanied by a paste to a solidlike transition, and plasticization of the resulting PANI/DBSA complex by the excess DBSA. Composition analysis of the process products sampled at the various stages showed that the initial blends, prior to their thermal processing, already consisted of partially doped PANI particles, having a core/shell structure; the core consists of PANIbase and the shell of PANI(DBSA)0.32 complex. In addition, at the paste-to-solidlike transition, the doping reaction is completed; further mixing does not affect the complex composition, but results in conductivity reduction. The morphology of the blends sampled at the various processing stages was studied by electron microscopy. From the conductivity and processibility point of view, optimal PANI/DBSA blend composition and processing temperature were identified. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 2199–2208, 1997

Melt-processed electrically conductive polymer/polyaniline blends

Abstract: In the present study, conductive polyaniline-p-toluene sulfonic acid (PANI-pTSA) blends with thermoplastic polymers were prepared by melt processing. The blends′ characterization focused on their morphology in light of the components′ interaction and the resulting electrical conductivity. The PANI-pTSA blends were compared with blends containing PANI-DBSA (dodecyl benzene sulfonic acid). Generally, the level of interaction between the doped polyaniline and the matrix polymer determines the blend morphology and the resulting electrical conductivity. Similar solubility parameters of the matrix polymer and doped PANI lead to high levels of PANI dispersion within the matrix and to formation of conducting paths at low PANI contents. The morphology of a conducting network is described by a primary structure of small dispersed PANI particles interconnected by a secondary, short-range, fine fibrillar structure. The doped PANI network locates within the amorphous regions of a semicrystalline matrix, leadi...

Structured electrically conductive polyaniline/polymer blends

Abstract: This paper describes electrically conductive polymer blends consisting of polyaniline (PANI) dispersed in a polymer matrix. Melt blending of previously mixed, coagulated and dried aqueous dispersions of PANI and the polymer matrix lead to high conductivities at extremely low PANI concentrations (∼0.5 wt% PANI). In these blends the surface properties (surfactants used) of the PANI and the polymer particles play a major role in the structuring process, in addition to the very small size of the PANI particles. In another approach, i.e. conventional melt blending of PANI powder with a given polymer powder, the success of generating an efficient conductive network depends on the PANI/polymer interaction level. A high interaction level (for example, similar solubility parameters) leads under dynamic hot blending conditions to the formation of conductive networks, but still at relatively high PANI concentration (>10 wt% PANI). To further reduce the PANI conductivity threshold concentration, ternary PANI/polymer/polymer blends can be designed, in which PANI is selectively attracted to the minor polymer component, thus generating double-percolation structures. The threshold PANI concentration in the ternary blends may be reduced by a factor of ∼2 compared to the binary blends. Further reduction can be expected in special ternary blends designed so that the PANI particles will mostly locate at the interfaces, rather than within the dispersed minor polymer particles. The blending method of aqueous dispersions is limited to matrix polymers which can be synthesized by emulsion polymerization. Thus, the conventional melt blending procedure and also the formation of ternary blend systems are particularly beneficial for condensation-type polymers, whereas melt blending of PANI/polymer powders prepared by the aqueous dispersions method is beneficial for the addition-type polymers. Copyright © 2000 John Wiley & Sons, Ltd.

Conductivity and structure of melt‐processed polyaniline binary and ternary blends

Abstract: WWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWW In the present study, conductive binary and ternary blends containing polyaniline (PANI) were developed through melt blending. The binary blends' investigation focused on the morphology, in light of the components' interaction, and the resulting electrical conductivity. Similar solubility parameters of a given doped PANI and a matrix polymer lead to dispersion of fine PANI particles within the matrix, and to formation of conducting paths at low PANI contents. A plasticizer acting also as a compatibilizer improves the matrix polymer/PANI interactions. In ternary blends consisting of PANI and two immiscible polymers, the PANI preferrentially locates in one of the components, affecting the blend's morphology. This aconcentratingo effect leads to relatively high electrical conductivity at a low PANI content. The electrical conductivity of the studied ternary blends is almost independent of the components' sequence of addition into the hot melt mixing device, exhibiting the selectivity of PANI towards one of the components. Copyright Ó 2000 John Wiley & Sons, Ltd.