Author
Adisorn Tuantranont
Other affiliations: NECTEC, Asian Institute of Technology, University of Colorado Boulder ...read more
Bio: Adisorn Tuantranont is an academic researcher from Thailand National Science and Technology Development Agency. The author has contributed to research in topics: Graphene & Materials science. The author has an hindex of 44, co-authored 291 publications receiving 7104 citations. Previous affiliations of Adisorn Tuantranont include NECTEC & Asian Institute of Technology.
Topics: Graphene, Materials science, Electrode, Nanoparticle, Carbon nanotube
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this paper, the authors extensively review the development of semiconductor metal oxide gas sensors for environmentally hazardous gases including NO2, NO, N2O, H2S, CO, NH3, CH4, SO2 and CO2.
Abstract: This article extensively reviews the recent development of semiconductor metal oxide gas sensors for environmentally hazardous gases including NO2, NO, N2O, H2S, CO, NH3, CH4, SO2 and CO2. The gas sensing properties of differently-prepared metal oxides and loaded metal oxides towards nine environmentally hazardous gases have been individually compared and digested. Promising materials for sensitive and selective detection of each hazardous gas have been identified. For instance, unloaded WO3 nanostructures are the most promising candidates for NO2 sensing while metal catalyst loaded WO3 and gold-loaded SnO2 sensors are among the most effective for NO and N2O sensing, respectively. Moreover, related gas-sensing mechanisms are comprehensively discussed.
999 citations
••
TL;DR: There is still a need to incorporate various categories of micropumps in practical drug delivery and biomedical devices and this will continue to provide a substantial stimulus for micropump research and development in future.
Abstract: This paper briefly overviews progress on the development of MEMS-based micropumps and their applications in drug delivery and other biomedical applications such as micrototal analysis systems (μTAS) or lab-on-a-chip and point of care testing systems (POCT). The focus of the review is to present key features of micropumps such as actuation methods, working principles, construction, fabrication methods, performance parameters and their medical applications. Micropumps have been categorized as mechanical or non-mechanical based on the method by which actuation energy is obtained to drive fluid flow. The survey attempts to provide a comprehensive reference for researchers working on design and development of MEMS-based micropumps and a source for those outside the field who wish to select the best available micropump for a specific drug delivery or biomedical application. Micropumps for transdermal insulin delivery, artificial sphincter prosthesis, antithrombogenic micropumps for blood transportation, micropump for injection of glucose for diabetes patients and administration of neurotransmitters to neurons and micropumps for chemical and biological sensing have been reported. Various performance parameters such as flow rate, pressure generated and size of the micropump have been compared to facilitate selection of appropriate micropump for a particular application. Electrowetting, electrochemical and ion conductive polymer film (ICPF) actuator micropumps appear to be the most promising ones which provide adequate flow rates at very low applied voltage. Electroosmotic micropumps consume high voltages but exhibit high pressures and are intended for applications where compactness in terms of small size is required along with high-pressure generation. Bimetallic and electrostatic micropumps are smaller in size but exhibit high self-pumping frequency and further research on their design could improve their performance. Micropumps based on piezoelectric actuation require relatively high-applied voltage but exhibit high flow rates and have grown to be the dominant type of micropumps in drug delivery systems and other biomedical applications. Although a lot of progress has been made in micropump research and performance of micropumps has been continuously increasing, there is still a need to incorporate various categories of micropumps in practical drug delivery and biomedical devices and this will continue to provide a substantial stimulus for micropump research and development in future.
550 citations
••
TL;DR: In this article, a microfluidic sensor is implemented from a single split-ring resonator (SRR), a fundamental building block of electromagnetic metamaterials, which is capable of sensing liquid flowing in the channel with a cross-sectional area as small as (0.001 λ 0 ) 2.
Abstract: A microfluidic sensor is implemented from a single split-ring resonator (SRR), a fundamental building block of electromagnetic metamaterials. At resonance, an SRR establishes an intense electric field confined within a deeply subwavelength region. Liquid flowing in a micro-channel laid on this region can alter the local field distribution and hence affect the SRR resonance behavior. Specifically, the resonance frequency and bandwidth are influenced by the complex dielectric permittivity of the liquid sample. The empirical relation between the sensor resonance and the sample permittivity can be established, and from this relation, the complex permittivity of liquid samples can be estimated. The technique is capable of sensing liquid flowing in the channel with a cross-sectional area as small as (0.001 λ 0 ) 2 , where λ 0 denotes the free-space wavelength of the wave excitation. This work motivates the use of SRR-based microfluidic sensors for identification, classification, and characterization of chemical and biochemical analytes.
348 citations
••
TL;DR: A paper-based colorimetric assay for DNA detection based on pyrrolidinyl peptide nucleic acid (acpcPNA)-induced nanoparticle aggregation is reported as an alternative to traditional colorimetry approaches.
Abstract: The development of simple fluorescent and colorimetric assays that enable point-of-care DNA and RNA detection has been a topic of significant research because of the utility of such assays in resource limited settings. The most common motifs utilize hybridization to a complementary detection strand coupled with a sensitive reporter molecule. Here, a paper-based colorimetric assay for DNA detection based on pyrrolidinyl peptide nucleic acid (acpcPNA)-induced nanoparticle aggregation is reported as an alternative to traditional colorimetric approaches. PNA probes are an attractive alternative to DNA and RNA probes because they are chemically and biologically stable, easily synthesized, and hybridize efficiently with the complementary DNA strands. The acpcPNA probe contains a single positive charge from the lysine at C-terminus and causes aggregation of citrate anion-stabilized silver nanoparticles (AgNPs) in the absence of complementary DNA. In the presence of target DNA, formation of the anionic DNA-acpcPN...
274 citations
••
TL;DR: In this paper, a portable electronic nose (E-nose) based on hybrid carbon nanotube-SnO2 gas sensors is described, which employs feature extraction techniques including integral and primary derivative, which lead to higher classification performance as compared to the classical features.
Abstract: In this paper, a portable electronic nose (E-nose) based on hybrid carbon nanotube-SnO2 gas sensors is described. The hybrid gas sensors were fabricated using electron beam (E-beam) evaporation by means of powder mixing. The instrument employs feature extraction techniques including integral and primary derivative, which lead to higher classification performance as compared to the classical features (ΔR and ΔR/R0). It was shown that doping of carbon nanotube (CNT) improves the sensitivity of hybrid gas sensors, while quantity of CNT has a direct effect on the selectivity to volatile organic compounds, i.e., methanol (MeOH) and ethanol (EtOH). The real-world applications of this E-nose were also demonstrated. Based on the proposed methods, this instrument can monitor and classify 1 vol% of MeOH contamination in whiskeys.
174 citations
Cited by
More filters
•
28,685 citations
••
TL;DR: In this paper, the development of different strategies to modify TiO2 for the utilization of visible light, including non metal and/or metal doping, dye sensitization and coupling semiconductors are discussed.
Abstract: Fujishima and Honda (1972) demonstrated the potential of titanium dioxide (TiO2) semiconductor materials to split water into hydrogen and oxygen in a photo-electrochemical cell. Their work triggered the development of semiconductor photocatalysis for a wide range of environmental and energy applications. One of the most significant scientific and commercial advances to date has been the development of visible light active (VLA) TiO2 photocatalytic materials. In this review, a background on TiO2 structure, properties and electronic properties in photocatalysis is presented. The development of different strategies to modify TiO2 for the utilization of visible light, including non metal and/or metal doping, dye sensitization and coupling semiconductors are discussed. Emphasis is given to the origin of visible light absorption and the reactive oxygen species generated, deduced by physicochemical and photoelectrochemical methods. Various applications of VLA TiO2, in terms of environmental remediation and in particular water treatment, disinfection and air purification, are illustrated. Comprehensive studies on the photocatalytic degradation of contaminants of emerging concern, including endocrine disrupting compounds, pharmaceuticals, pesticides, cyanotoxins and volatile organic compounds, with VLA TiO2 are discussed and compared to conventional UV-activated TiO2 nanomaterials. Recent advances in bacterial disinfection using VLA TiO2 are also reviewed. Issues concerning test protocols for real visible light activity and photocatalytic efficiencies with different light sources have been highlighted.
3,305 citations
01 Nov 2000
TL;DR: In this paper, the authors compared the power density characteristics of ultracapacitors and batteries with respect to the same charge/discharge efficiency, and showed that the battery can achieve energy densities of 10 Wh/kg or higher with a power density of 1.2 kW/kg.
Abstract: The science and technology of ultracapacitors are reviewed for a number of electrode materials, including carbon, mixed metal oxides, and conducting polymers. More work has been done using microporous carbons than with the other materials and most of the commercially available devices use carbon electrodes and an organic electrolytes. The energy density of these devices is 3¯5 Wh/kg with a power density of 300¯500 W/kg for high efficiency (90¯95%) charge/discharges. Projections of future developments using carbon indicate that energy densities of 10 Wh/kg or higher are likely with power densities of 1¯2 kW/kg. A key problem in the fabrication of these advanced devices is the bonding of the thin electrodes to a current collector such the contact resistance is less than 0.1 cm2. Special attention is given in the paper to comparing the power density characteristics of ultracapacitors and batteries. The comparisons should be made at the same charge/discharge efficiency.
2,437 citations
••
TL;DR: In this paper, a detailed study of semiconductor metal oxide (SMO) gas sensors is provided for a detailed comparison of SMO gas sensors with other gas sensors, especially for ammonia gas sensing.
Abstract: This review paper encompasses a detailed study of semiconductor metal oxide (SMO) gas sensors. It provides for a detailed comparison of SMO gas sensors with other gas sensors, especially for ammonia gas sensing. Different parameters which affect the performance (sensitivity, selectivity and stability) of SMO gas sensors are discussed here under. This paper also gives an insight about the dopant or impurity induced variations in the SMO materials used for gas sensing. It is concluded that dopants enhance the properties of SMOs for gas sensing applications by changing their microstructure and morphology, activation energy, electronic structure or band gap of the metal oxides. In some cases, dopants create defects in SMOs by generating oxygen vacancy or by forming solid solutions. These defects enhance the gas sensing properties. Different nanostructures (nanowires, nanotubes, heterojunctions), other than nanopowders have also been studied in this review. At the end, examples of SMOs are given to illustrate the potential use of different SMO materials for gas sensing.
1,296 citations