Aditya Kakkar

Bio: Aditya Kakkar is an academic researcher from Royal Institute of Technology. The author has contributed to research in topics: Phase noise & Quadrature amplitude modulation. The author has an hindex of 12, co-authored 35 publications receiving 402 citations.

800G DSP ASIC Design Using Probabilistic Shaping and Digital Sub-Carrier Multiplexing

Abstract: The design of application-specific integrated circuits (ASIC) is at the core of modern ultra-high-speed transponders employing advanced digital signal processing (DSP) algorithms. This manuscript discusses the motivations for jointly utilizing transmission techniques such as probabilistic shaping and digital sub-carrier multiplexing in digital coherent optical transmissions systems. First, we describe the key-building blocks of modern high-speed DSP-based transponders working at up to 800G per wave. Second, we show the benefits of these transmission methods in terms of system level performance. Finally, we report, to the best of our knowledge, the first long-haul experimental transmission – e.g., over 1000 km – with a real-time 7 nm DSP ASIC and digital coherent optics (DCO) capable of data rates up to 1.6 Tb/s using two waves (2 × 800G).

100 GHz Externally Modulated Laser for Optical Interconnects

Abstract: We report on a 116 Gb/s on-off keying (OOK), four pulse amplitude modulation (PAM) and 105-Gb/s 8-PAM optical transmitter using an InP-based integrated and packaged externally modulated laser for high-speed optical interconnects with up to 30 dB static extinction ratio and over 100-GHz 3-dB bandwidth with 2 dB ripple. In addition, we study the tradeoff between power penalty and equalizer length to foresee transmission distances with standard single mode fiber.

Gigabit free-space multi-level signal transmission with a mid-infrared quantum cascade laser operating at room temperature

Abstract: Gigabit free-space transmissions are experimentally demonstrated with a quantum cascaded laser (QCL) emitting at mid-wavelength infrared of 4.65 μm, and a commercial infrared photovoltaic detector. The QCL operating at room temperature is directly modulated using on-off keying and, for the first time, to the best of our knowledge, four- and eight-level pulse amplitude modulations (PAM-4, PAM-8). By applying pre- and post-digital equalizations, we achieve up to 3 Gbit/s line data rate in all three modulation configurations with a bit error rate performance of below the 7% overhead hard decision forward error correction limit of 3.8×10-3. The proposed transmission link also shows a stable operational performance in the lab environment.

Comprehensive Study of Equalization-Enhanced Phase Noise in Coherent Optical Systems

Abstract: A thorough analysis of equalization-enhanced phase noise (EEPN) and its impact on the coherent optical system is presented. We show with a time-domain analysis that EEPN is caused due to the interference of multiple delayed versions of the dispersed signal, generated by intermixing of the received dispersed signal, and the noise side bands of the local oscillator (LO) in the photodetectors. We derive statistical properties such as the mean, variance, and error vector magnitude of the received signal influenced with EEPN. We show that in coherent optical systems utilizing electronic dispersion compensation, this noise corresponds to multipath fading in wireless communication systems. Closed-form expressions of necessary LO linewidth and/or mitigation bandwidth for a general system configuration and specified OSNR penalty are given. The expressions for system design parameters, validated with system simulations, show that higher order modulation formats, such as 16-quadrature amplitude modulation and beyond, put stringent demands on the LO linewidth unless a mitigation technique is used.

Laser Frequency Noise in Coherent Optical Systems: Spectral Regimes and Impairments.

Abstract: Coherent communication networks are based on the ability to use multiple dimensions of the lightwave together with electrical domain compensation of transmission impairments. Electrical-domain dispersion compensation (EDC) provides many advantages such as network flexibility and enhanced fiber nonlinearity tolerance, but makes the system more susceptible to laser frequency noise (FN), e.g. to the local oscillator FN in systems with post-reception EDC. Although this problem has been extensively studied, statistically, for links assuming lasers with white-FN, many questions remain unanswered. Particularly, the influence of a realistic non-white FN-spectrum due to e.g., the presence of 1/f-flicker and carrier induced noise remains elusive and a statistical analysis becomes insufficient. Here we provide an experimentally validated theory for coherent optical links with lasers having general non-white FN-spectrum and EDC. The fundamental reason of the increased susceptibility is shown to be FN-induced symbol displacement that causes timing jitter and/or inter/intra symbol interference. We establish that different regimes of the laser FN-spectrum cause a different set of impairments. The influence of the impairments due to some regimes can be reduced by optimizing the corresponding mitigation algorithms, while other regimes cause irretrievable impairments. Theoretical boundaries of these regimes and corresponding criteria applicable to system/laser design are provided.

800G DSP ASIC Design Using Probabilistic Shaping and Digital Sub-Carrier Multiplexing

Abstract: The design of application-specific integrated circuits (ASIC) is at the core of modern ultra-high-speed transponders employing advanced digital signal processing (DSP) algorithms. This manuscript discusses the motivations for jointly utilizing transmission techniques such as probabilistic shaping and digital sub-carrier multiplexing in digital coherent optical transmissions systems. First, we describe the key-building blocks of modern high-speed DSP-based transponders working at up to 800G per wave. Second, we show the benefits of these transmission methods in terms of system level performance. Finally, we report, to the best of our knowledge, the first long-haul experimental transmission – e.g., over 1000 km – with a real-time 7 nm DSP ASIC and digital coherent optics (DCO) capable of data rates up to 1.6 Tb/s using two waves (2 × 800G).

Performance limits in optical communications due to fiber nonlinearity

Abstract: In this paper, we review the historical evolution of predictions of the performance of optical communication systems. We will describe how such predictions were made from the outset of research in laser based optical communications and how they have evolved to their present form, accurately predicting the performance of coherently detected communication systems.

High-Speed Silicon Photonics Modulators

Abstract: The realization of gigahertz bandwidth modulators out of silicon-based technology in the early 2000s marked a cornerstone of silicon photonics development. While modulation speeds have since progressed well above 50 GHz and satisfy the bandwidth requirements of current and emerging modulation formats, concurrently obtaining low drive voltages and low insertion losses remains a very active area of research. While modulators generally come in two categories, direct absorption and those relying on embedded phase shifters, the focus of this paper lies on the latter capable of supporting both complex-valued modulation and optically broadband operation. The paper provides an overview of the current state of the art, as well as of currently explored improvement paths. First, common phase shifter configurations, aspects related to electrical driving, and associated power consumption are reviewed. Slow-wave, resonant, and plasmonic enhancements are further discussed. The reader is familiarized with the optimization of these devices and provided with a sense of the limitations of current technology and the potential of novel hybrid material integration.

200 Gbps/Lane IM/DD Technologies for Short Reach Optical Interconnects

Abstract: Client-side optics are facing an ever-increasing upgrading pace, driven by upcoming 5G related services and datacenter applications. The demand for a single lane data rate is soon approaching 200 Gbps. To meet such high-speed requirement, all segments of traditional intensity modulation direct detection (IM/DD) technologies are being challenged. The characteristics of electrical and optoelectronic components and the performance of modulation, coding, and digital signal processing (DSP) techniques are being stretched to their limits. In this context, we witnessed technological breakthroughs in several aspects, including development of broadband devices, novel modulation formats and coding, and high-performance DSP algorithms for the past few years. A great momentum has been accumulated to overcome the aforementioned challenges. In this article, we focus on IM/DD transmissions, and provide an overview of recent research and development efforts on key enabling technologies for 200 Gbps per lane and beyond. Our recent demonstrations of 200 Gbps short-reach transmissions with 4-level pulse amplitude modulation (PAM) and discrete multitone signals are also presented as examples to show the system requirements in terms of device characteristics and DSP performance. Apart from digital coherent technologies and advanced direct detection systems, such as Stokes–vector and Kramers–Kronig schemes, we expect high-speed IM/DD systems will remain advantageous in terms of system cost, power consumption, and footprint for short reach applications in the short- to mid- term perspective.

Directly modulated membrane lasers with 108 GHz bandwidth on a high-thermal-conductivity silicon carbide substrate

Abstract: Increasing the modulation speed of semiconductor lasers has attracted much attention from the viewpoint of both physics and the applications of lasers. Here we propose a membrane distributed reflector laser on a low-refractive-index and high-thermal-conductivity silicon carbide substrate that overcomes the modulation bandwidth limit. The laser features a high modulation efficiency because of its large optical confinement in the active region and small differential gain reduction at a high injection current density. We achieve a 42 GHz relaxation oscillation frequency by using a laser with a 50-μm-long active region. The cavity, designed to have a short photon lifetime, suppresses the damping effect while keeping the threshold carrier density low, resulting in a 60 GHz intrinsic 3 dB bandwidth (f3dB). By employing the photon–photon resonance at 95 GHz due to optical feedback from an integrated output waveguide, we achieve an f3dB of 108 GHz and demonstrate 256 Gbit s−1 four-level pulse-amplitude modulations with a 475 fJ bit−1 energy cost of the direct-current electrical input. Directly modulated membrane distributed reflector lasers are fabricated on a silicon carbide platform. The 3 dB bandwidth, four-level pulse-amplitude modulation speed and operating energy for transmitting one bit are 108 GHz, 256 Gbit s−1 and 475 fJ, respectively.