Additive manufacturing of metallic components – Process, structure and properties

Laser-based additive manufacturing (LBAM) processes can be utilized to generate functional parts (or prototypes) from the ground-up via layer-wise cladding – providing an opportunity to generate complex-shaped, functionally graded or custom-tailored parts that can be utilized for a variety of engineering applications. Directed Energy Deposition (DED), utilizes a concentrated heat source, which may be a laser or electron beam, with in situ delivery of powder- or wire-shaped material for subsequent melting to accomplish layer-by-layer part fabrication or single-to-multi layer cladding/repair. Direct Laser Deposition (DLD), a form of DED, has been investigated heavily in the last several years as it provides the potential to (i) rapidly prototype metallic parts, (ii) produce complex and customized parts, (iii) clad/repair precious metallic components and (iv) manufacture/repair in remote or logistically weak locations. DLD and Powder Bed Fusion-Laser (PBF-L) are two common LBAM processes for additive metal part fabrication and are currently demonstrating their ability to revolutionize the manufacturing industry; breaking barriers imposed via traditional, ‘subtractive’ metalworking processes. This article provides an overview of the major advancements, challenges and physical attributes related to DLD, and is one of two Parts focused specifically on DLD. Part I (this article) focuses on describing the thermal/fluidic phenomena during the powder-fed DLD process, while Part II focuses on the mechanical properties and microstructure of parts manufactured via DLD. In this current article, a selection of recent research efforts – including methodology, models and experimental results – will be provided in order to educate the reader of the thermal/fluidic processes that occur during DLD, as well as providing important background information relevant to DLD as a whole. The thermal/fluid phenomena inherent to DLD directly influence the solidification heat transfer which thus impacts the part's microstructure and associated thermo-mechanical properties. A thorough understanding of the thermal/fluid aspects inherent to DLD is vital for optimizing the DLD process and ensuring consistent, high-quality parts.

An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics

Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements

Selective laser melting (SLM) is an attractive technology, enabling the manufacture of customised, complex metallic designs, with minimal wastage. However, uptake by industry is currently impeded by several technical barriers, such as the control of residual stress, which have a detrimental effect on the manufacturability and integrity of a component. Indirectly, these impose severe design restrictions and reduce the reliability of components, driving up costs. This paper uses a thermo-mechanical model to better understand the effect of laser scan strategy on the generation of residual stress in SLM. A complex interaction between transient thermal history and the build-up of residual stress has been observed in the two laser scan strategies investigated. The temperature gradient mechanism was discovered for the creation of residual stress. The greatest stress component was found to develop parallel to the scan vectors, creating an anisotropic stress distribution in the part. The stress distribution varied between laser scan strategies and the cause has been determined by observing the thermal history during scanning. Using this, proposals are suggested for designing laser scan strategies used in SLM.

https://nottingham-repository.worktribe.com/preview/974815/ADDMA-D-16-00022.pdf

Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation

FEM prediction of welding residual stress and distortion in carbon steel considering phase transformation effects

A mathematical model for weld heat sources based on a Gaussian distribution of power density in space is presented. In particular a double ellipsoidal geometry is proposed so that the size and shape of the heat source can be easily changed to model both the shallow penetration arc welding processes and the deeper penetration laser and electron beam processes. In addition, it has the versatility and flexibility to handle non-axisymmetric cases such as strip electrodes or dissimilar metal joining. Previous models assumed circular or spherical symmetry. The computations are performed with ASGARD, a nonlinear transient finite element (FEM) heat flow program developed for the thermal stress analysis of welds.* Computed temperature distributions for submerged arc welds in thick workpieces are compared to the measured values reported by Christensen1 and the FEM calculated values (surface heat source model) of Krutz and Segerlind.2 In addition the computed thermal history of deep penetration electron beam welds are compared to measured values reported by Chong.3 The agreement between the computed and measured values is shown to be excellent.

Aditya P. Chakravarti

Papers

A new finite element model for welding heat sources

Distortion control in simulated one-pass panel bead welds