Adriaan B. Spierings

Bio: Adriaan B. Spierings is an academic researcher from University of St. Gallen. The author has contributed to research in topics: Selective laser melting & Microstructure. The author has an hindex of 23, co-authored 65 publications receiving 2747 citations. Previous affiliations of Adriaan B. Spierings include Alstom & ETH Zurich.

Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts

Abstract: Purpose – A recent study confirmed that the particle size distribution of a metallic powder material has a major influence on the density of a part produced by selective laser melting (SLM). Although it is possible to get high density values with different powder types, the processing parameters have to be adjusted accordingly, affecting the process productivity. However, the particle size distribution does not only affect the density but also the surface quality and the mechanical properties of the parts. The purpose of this paper is to investigate the effect of three different powder granulations on the resulting part density, surface quality and mechanical properties of the materials produced.Design/methodology/approach – The scan surface quality and mechanical properties of three different particle size distributions and two layer thicknesses of 30 and 45 μm were compared. The scan velocities for the different powder types have been adjusted in order to guarantee a part density≥99.5 per cent.Findings ...

Comparison of density measurement techniques for additive manufactured metallic parts

Abstract: Purpose – In the optimisation of processing parameters for additive manufactured parts using, e.g. selective laser melting (SLM) or electron beam melting, the measurement of the part densities is essential and of high interest. However, there is no common standard. Different institutes and system providers are using their own principles and guidelines. This study investigates the accuracies of the three measurement principles: Archimedes method, microscopic analysis of cross sections and X‐ray scanning.Design/methodology/approach – A total of 15 test samples on five density levels (densities between 90 and 99.5 per cent) were produced using the SLM process. The samples are analysed regarding the accuracy of the measurement principles and their reproducibility taking into account influencing parameters like the buoyancy of a sample in air (Archimedes method) or different magnifications of a cross section.Findings – The Archimedes method shows a very high accuracy (±0.08 per cent for high densities) and rep...

Fatigue performance of additive manufactured metallic parts

Abstract: Purpose – Additive manufacturing technologies such as, for example, selective laser melting (SLM) offer new design possibilities for a wide range of applications and industrial sectors. Whereas many results have been published regarding material options and their static mechanical properties, the knowledge about their dynamic mechanical behaviour is still low. The purpose of this paper is to deal with the measurement of the dynamic mechanical properties of two types of stainless steels.Design/methodology/approach – Specimens for dynamic testing were produced in a vertical orientation using SLM. The specimens were turned to the required end geometry and some of them were polished in order to minimise surface effects. Additionally, some samples were produced in the end geometry (“near net shape”) to investigate the effect of the comparably rough surface quality on the lifetime. The samples were tension‐tested and the results were compared to similar conventional materials.Findings – The SLM‐fabricated stain...

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Abstract: Freedom of design, mass customisation, waste minimisation and the ability to manufacture complex structures, as well as fast prototyping, are the main benefits of additive manufacturing (AM) or 3D printing. A comprehensive review of the main 3D printing methods, materials and their development in trending applications was carried out. In particular, the revolutionary applications of AM in biomedical, aerospace, buildings and protective structures were discussed. The current state of materials development, including metal alloys, polymer composites, ceramics and concrete, was presented. In addition, this paper discussed the main processing challenges with void formation, anisotropic behaviour, the limitation of computer design and layer-by-layer appearance. Overall, this paper gives an overview of 3D printing, including a survey on its benefits and drawbacks as a benchmark for future research and development.

The metallurgy and processing science of metal additive manufacturing

Abstract: Additive manufacturing (AM), widely known as 3D printing, is a method of manufacturing that forms parts from powder, wire or sheets in a process that proceeds layer by layer. Many techniques (using many different names) have been developed to accomplish this via melting or solid-state joining. In this review, these techniques for producing metal parts are explored, with a focus on the science of metal AM: processing defects, heat transfer, solidification, solid-state precipitation, mechanical properties and post-processing metallurgy. The various metal AM techniques are compared, with analysis of the strengths and limitations of each. Only a few alloys have been developed for commercial production, but recent efforts are presented as a path for the ongoing development of new materials for AM processes.

Review of selective laser melting : materials and applications

Abstract: Selective Laser Melting (SLM) is a particular rapid prototyping, 3D printing, or Additive Manufacturing (AM) technique designed to use high power-density laser to melt and fuse metallic powders. A component is built by selectively melting and fusing powders within and between layers. The SLM technique is also commonly known as direct selective laser sintering, LaserCusing, and direct metal laser sintering, and this technique has been proven to produce near net-shape parts up to 99.9% relative density. This enables the process to build near full density functional parts and has viable economic benefits. Recent developments of fibre optics and high-power laser have also enabled SLM to process different metallic materials, such as copper, aluminium, and tungsten. Similarly, this has also opened up research opportunities in SLM of ceramic and composite materials. The review presents the SLM process and some of the common physical phenomena associated with this AM technology. It then focuses on the following a...