Author
Adrian Ilinca
Other affiliations: Université du Québec, Lebanese University, École Polytechnique de Montréal
Bio: Adrian Ilinca is an academic researcher from Université du Québec à Rimouski. The author has contributed to research in topics: Wind power & Renewable energy. The author has an hindex of 28, co-authored 128 publications receiving 4338 citations. Previous affiliations of Adrian Ilinca include Université du Québec & Lebanese University.
Topics: Wind power, Renewable energy, Diesel fuel, Turbine, Airfoil
Papers published on a yearly basis
Papers
More filters
TL;DR: In this paper, the main characteristics of different electricity storage techniques and their field of application (permanent or portable, long- or short-term storage, maximum power required, etc.).
Abstract: Electricity generated from renewable sources, which has shown remarkable growth worldwide, can rarely provide immediate response to demand as these sources do not deliver a regular supply easily adjustable to consumption needs. Thus, the growth of this decentralized production means greater network load stability problems and requires energy storage, generally using lead batteries, as a potential solution. However, lead batteries cannot withstand high cycling rates, nor can they store large amounts of energy in a small volume. That is why other types of storage technologies are being developed and implemented. This has led to the emergence of storage as a crucial element in the management of energy from renewable sources, allowing energy to be released into the grid during peak hours when it is more valuable. The work described in this paper highlights the need to store energy in order to strengthen power networks and maintain load levels. There are various types of storage methods, some of which are already in use, while others are still in development. We have taken a look at the main characteristics of the different electricity storage techniques and their field of application (permanent or portable, long- or short-term storage, maximum power required, etc.). These characteristics will serve to make comparisons in order to determine the most appropriate technique for each type of application.
1,822 citations
TL;DR: In this paper, the authors proposed an active and passive anti-icing and de-icing strategies to minimize the effects of wind turbine icing in various ways, including measurement and control errors, power losses, mechanical and electrical failures and safety hazard.
648 citations
TL;DR: A review of the optimization techniques and strategies applied to wind turbine performance optimization is presented in this paper by identifying the most significant objectives, targets and issues, as well as the optimization formulations, schemes and models available in the published literature.
276 citations
TL;DR: In this article, the authors presented a comprehensive wind atlas of the Province of Quebec using the scheme proposed by the Battelle-Pacific Northwest Laboratory (PNL), which is a numerical one which includes rankings from wind power Class 1 (lowest) to wind Power Class 7 (highest).
141 citations
TL;DR: In this article, the authors compare the existing ice mitigation solutions and provide an indication on their efficiency, and present an analysis of the current market, compare ice protection techniques and systems, based on various criteria, and measure the additional costs generated by ice mitigation.
Abstract: The impact of icing on wind turbines and energy production in northern regions is a severe problem. Therefore, emphasis on developing ice mitigation systems has become a significant part of the wind energy conversion systems. These systems use various technologies and have different specifications, sometimes with no clear indication of their efficiency. Since the effect of cold climate on wind turbines is complex, not every ice protection system is suitable for a given wind farm. Therefore, the aim of this work is to compare the existing ice mitigation solutions and provide an indication on their efficiency. In this paper, we first review the most recent standards set by experts, and the major issues associated with wind energy in cold climates. Then, we present the ice protection techniques found in the literature, and then highlight the recent research on the optimization of the systems. Finally, we present an analysis of the current market, compare ice protection techniques and systems, based on various criteria, and measure the additional costs generated by ice mitigation.
131 citations
Cited by
More filters
TL;DR: A comprehensive and clear picture of the state-of-the-art technologies available, and where they would be suited for integration into a power generation and distribution system is provided in this article.
2,790 citations
TL;DR: In this paper, a variety of electrode materials including cathodes and anodes as well as electrolytes for room-temperature stationary sodium-ion batteries are briefly reviewed and compared the difference in storage behavior between Na and Li in their analogous electrodes and summarize the sodium storage mechanisms in available electrode materials.
Abstract: Room-temperature stationary sodium-ion batteries have attracted great attention particularly in large-scale electric energy storage applications for renewable energy and smart grid because of the huge abundant sodium resources and low cost. In this article, a variety of electrode materials including cathodes and anodes as well as electrolytes for room-temperature stationary sodium-ion batteries are briefly reviewed. We compare the difference in storage behavior between Na and Li in their analogous electrodes and summarize the sodium storage mechanisms in the available electrode materials. This review also includes some new results from our group and our thoughts on developing new materials. Some perspectives and directions on designing better materials for practical applications are pointed out based on knowledge from the literature and our experience. Through this extensive literature review, the search for suitable electrode and electrolyte materials for stationary sodium-ion batteries is still challenging. However, after intensive research efforts, we believe that low-cost, long-life and room-temperature sodium-ion batteries would be promising for applications in large-scale energy storage system in the near future.
2,687 citations
TL;DR: The Scope of Review: Large-Scale Centralized Energy Storage, Chemical Energy Storage: Solar Fuels, and Capacitors 6486 5.1.2.
Abstract: 1. Setting the Scope of the Challenge 6474 1.1. The Need for Solar Energy Supply and Storage 6474 1.2. An Imperative for Discovery Research 6477 1.3. Scope of Review 6478 2. Large-Scale Centralized Energy Storage 6478 2.1. Pumped Hydroelectric Energy Storage (PHES) 6479 2.2. Compressed Air Energy Storage (CAES) 6480 3. Smaller Scale Grid and Distributed Energy Storage 6481 3.1. Flywheel Energy Storage (FES) 6481 3.2. Superconducting Magnetic Energy Storage 6482 4. Chemical Energy Storage: Electrochemical 6482 4.1. Batteries 6482 4.1.1. Lead-Acid Batteries 6483 4.1.2. Alkaline Batteries 6484 4.1.3. Lithium-Ion Batteries 6484 4.1.4. High-Temperature Sodium Batteries 6484 4.1.5. Liquid Flow Batteries 6485 4.1.6. Metal-Air Batteries 6485 4.2. Capacitors 6485 5. Chemical Energy Storage: Solar Fuels 6486 5.1. Solar Fuels in Nature 6486 5.2. Artificial Photosynthesis and General Considerations of Water Splitting 6486
2,570 citations
TL;DR: In this article, the hydrogen (H2) and oxygen (O2) fuel cell is the one with zero carbon emission and water as the only byproduct, which is essential to ensure higher life cycle and less decay in cell efficiency.
Abstract: Increasing demand for finding eco-friendly and everlasting energy sources is now totally depending on fuel cell technology. Though it is an eco-friendly way of producing energy for the urgent requirements, it needs to be improved to make it cheaper and more eco-friendly. Although there are several types of fuel cells, the hydrogen (H2) and oxygen (O2) fuel cell is the one with zero carbon emission and water as the only byproduct. However, supplying fuels in the purest form (at least the H2) is essential to ensure higher life cycles and less decay in cell efficiency. The current large-scale H2 production is largely dependent on steam reforming of fossil fuels, which generates CO2 along with H2 and the source of which is going to be depleted. As an alternate, electrolysis of water has been given greater attention than the steam reforming. The reasons are as follows: the very high purity of the H2 produced, the abundant source, no need for high-temperature, high-pressure reactors, and so on. In earlier days,...
1,757 citations
TL;DR: In this paper, the authors examined the existing literature in the analysis of life cycle costs of utility-scale electricity storage systems, providing an updated database for the cost elements (capital costs, operational and maintenance costs, and replacement costs).
Abstract: Large-scale deployment of intermittent renewable energy (namely wind energy and solar PV) may entail new challenges in power systems and more volatility in power prices in liberalized electricity markets. Energy storage can diminish this imbalance, relieving the grid congestion, and promoting distributed generation. The economic implications of grid-scale electrical energy storage technologies are however obscure for the experts, power grid operators, regulators, and power producers. A meticulous techno-economic or cost-benefit analysis of electricity storage systems requires consistent, updated cost data and a holistic cost analysis framework. To this end, this study critically examines the existing literature in the analysis of life cycle costs of utility-scale electricity storage systems, providing an updated database for the cost elements (capital costs, operational and maintenance costs, and replacement costs). Moreover, life cycle costs and levelized cost of electricity delivered by electrical energy storage is analyzed, employing Monte Carlo method to consider uncertainties. The examined energy storage technologies include pumped hydropower storage, compressed air energy storage (CAES), flywheel, electrochemical batteries (e.g. lead–acid, NaS, Li-ion, and Ni–Cd), flow batteries (e.g. vanadium-redox), superconducting magnetic energy storage, supercapacitors, and hydrogen energy storage (power to gas technologies). The results illustrate the economy of different storage systems for three main applications: bulk energy storage, T&D support services, and frequency regulation.
1,279 citations