scispace - formally typeset
Search or ask a question
Author

Agus Haryanto

Other affiliations: Mississippi State University
Bio: Agus Haryanto is an academic researcher from Lampung University. The author has contributed to research in topics: Hydrogen production & Biodiesel. The author has an hindex of 14, co-authored 74 publications receiving 2862 citations. Previous affiliations of Agus Haryanto include Mississippi State University.


Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, the current state of the steam reforming process of ethanol, examines different catalysts, and makes a comparative analysis, and concludes that Co/ZnO, ZnO+Al2O3, Co/CeO2, Ni/La 2O3−Ni/La2O2−Al2E3, and Ni/E3−E2E2−E3 performed the best in terms of steam reforming of ethanol.
Abstract: Hydrogen is considered to be the most viable energy carrier for the future. Producing hydrogen from ethanol steam reforming would not only be environmentally friendly but also would open new opportunities for utilization of renewable resources, which are globally available. This paper reviews the current state of the steam reforming process of ethanol, examines different catalysts, and, finally, makes a comparative analysis. Different catalysts have been used for the steam reforming of ethanol. Depending on the type of catalysts, reaction conditions, and the catalyst preparation method, ethanol conversion and hydrogen production vary greatly. It was observed that Co/ZnO, ZnO, Rh/Al2O3, Rh/CeO2, and Ni/La2O3−Al2O3 performed the best, in regard to the steam reforming of ethanol. Currently, hydrogen production from ethanol steam reforming is still in the research and development stage.

1,255 citations

Journal ArticleDOI
TL;DR: In this article, a thermodynamic equilibrium analysis has been performed for the steam reforming process of glycerol over the following variable ranges: pressure 1-5m, temperature 600-1000k, and water-to-glycerol feed ratio 1:1-9:1.

284 citations

Journal ArticleDOI
TL;DR: In this article, the authors reviewed different generation methods, catalysts and operating conditions used to produce hydrogen using glycerol as a substrate, including steam reforming, autothermal reforming, aqueous-phase reforming and supercritical water reforming.

256 citations

Journal ArticleDOI
TL;DR: In this article, the effect of these catalysts on hydrogen selectivity and glycerin conversion in temperatures ranging from 600 to 900 ˚C was discussed, and it was found that with an increase in water to glycerins molar ratio, hydrogen selectivities increased.

226 citations

Journal ArticleDOI
TL;DR: In this article, the use of glycerin as a biorenewable substrate for hydrogen production, using a steam reforming process, has been evaluated, and the maximum hydrogen yield was obtained at 650°C with MgO supported catalysts.

215 citations


Cited by
More filters
Journal Article
TL;DR: This book by a teacher of statistics (as well as a consultant for "experimenters") is a comprehensive study of the philosophical background for the statistical design of experiment.
Abstract: THE DESIGN AND ANALYSIS OF EXPERIMENTS. By Oscar Kempthorne. New York, John Wiley and Sons, Inc., 1952. 631 pp. $8.50. This book by a teacher of statistics (as well as a consultant for \"experimenters\") is a comprehensive study of the philosophical background for the statistical design of experiment. It is necessary to have some facility with algebraic notation and manipulation to be able to use the volume intelligently. The problems are presented from the theoretical point of view, without such practical examples as would be helpful for those not acquainted with mathematics. The mathematical justification for the techniques is given. As a somewhat advanced treatment of the design and analysis of experiments, this volume will be interesting and helpful for many who approach statistics theoretically as well as practically. With emphasis on the \"why,\" and with description given broadly, the author relates the subject matter to the general theory of statistics and to the general problem of experimental inference. MARGARET J. ROBERTSON

13,333 citations

Journal ArticleDOI
TL;DR: This review has a wide view on all those aspects related to ceria which promise to produce an important impact on the authors' life, encompassing fundamental knowledge of CeO2 and its properties, characterization toolbox, emerging features, theoretical studies, and all the catalytic applications, organized by their degree of establishment on the market.
Abstract: Cerium dioxide (CeO2, ceria) is becoming an ubiquitous constituent in catalytic systems for a variety of applications. 2016 sees the 40th anniversary since ceria was first employed by Ford Motor Company as an oxygen storage component in car converters, to become in the years since its inception an irreplaceable component in three-way catalysts (TWCs). Apart from this well-established use, ceria is looming as a catalyst component for a wide range of catalytic applications. For some of these, such as fuel cells, CeO2-based materials have almost reached the market stage, while for some other catalytic reactions, such as reforming processes, photocatalysis, water-gas shift reaction, thermochemical water splitting, and organic reactions, ceria is emerging as a unique material, holding great promise for future market breakthroughs. While much knowledge about the fundamental characteristics of CeO2-based materials has already been acquired, new characterization techniques and powerful theoretical methods are dee...

1,710 citations

Journal ArticleDOI
TL;DR: In this article, the state-of-the-art hydrogen production technologies using renewable and sustainable energy resources are presented, including supercritical water gasification (SCWG) of biomass is the most cost effective thermochemical process.
Abstract: Fossil fuel consumption in transportation system and energy-intensive sectors as the principal pillar of civilization is associated with progressive release of greenhouse gases. Hydrogen as a promising energy carrier is a perfect candidate to supply the energy demand of the world and concomitantly reduce toxic emissions. This article gives an overview of the state-of-the-art hydrogen production technologies using renewable and sustainable energy resources. Hydrogen from supercritical water gasification (SCWG) of biomass is the most cost effective thermochemical process. Highly moisturized biomass is utilized directly in SCWG without any high cost drying process. In SCWG, hydrogen is produced at high pressure and small amount of energy is required to pressurize hydrogen in the storage tank. Tar and char formation decreases drastically in biomass SCWG. The low efficiency of solar to hydrogen system as well as expensive photovoltaic cell are the most important barriers for the widespread commercial development of solar-based hydrogen production. Since electricity costs play a crucial role on the final hydrogen price, to generate carbon free hydrogen from solar and wind energy at a competitive price with fossil fuels, the electrical energy cost should be four times less than commercial electricity prices.

1,359 citations

Journal ArticleDOI
TL;DR: The majority of crude glycerol is used as feedstock for production of other value-added chemicals, followed by animal feeds, and the value- added utilization opportunities of crude Glycerol are reviewed.
Abstract: Biodiesel is a promising alternative, and renewable, fuel. As its production increases, so does production of the principle co-product, crude glycerol. The effective utilization of crude glycerol will contribute to the viability of biodiesel. In this review, composition and quality factors of crude glycerol are discussed. The value-added utilization opportunities of crude glycerol are reviewed. The majority of crude glycerol is used as feedstock for production of other value-added chemicals, followed by animal feeds.

900 citations

Journal ArticleDOI
TL;DR: In this paper, an attempt has been made to review the different approaches and techniques used to produce glycerol (hydrolysis, transesterification, refining crude glycerols).
Abstract: The demand for petroleum has been rising rapidly due to increasing industrialization and modernization. This economic development has led to a huge demand for energy, most of which is derived from fossil fuel. However, the limited reserve of fossil fuel has led many researchers to look for alternative fuels which can be produced from renewable feedstock. Increasing fossil fuel prices have prompted the global oil industry to look at biodiesel, which is from renewable energy sources. Biodiesel is produced from animal fats and vegetable oils and has become more attractive because it is more environmentally friendly and is obtained from renewable sources. Glycerol is the main by-product of biodiesel production; about 10% of the weight of biodiesel is generated in glycerol. The large amount of glycerol generated may become an environmental problem, since it cannot be disposed of in the environment. In this paper, an attempt has been made to review the different approaches and techniques used to produce glycerol (hydrolysis, transesterification, refining crude glycerol). The world biodiesel/glycerol production and consumption market, the current world glycerin and glycerol prices as well as the news trends for the use of glycerol mainly in Brazil market are analyzed. The technological production and physicochemical properties of glycerol are described, as is the characterization of crude glycerol obtained from different seed oil feedstock. Finally, a simple way to use glycerol in large amounts is combustion, which is an advantageous method as it does not require any purification. However, the combustion process of crude glycerol is not easy and there are technological difficulties. The news and mainly research about the combustion of glycerol was also addressed in this review.

770 citations