Current methodology of MTT assay in bacteria - A review.

Metal complexes of Schiff base: Preparation, characterization and antibacterial activity

Identifying a quick and efficient method of removing organic matter without damaging microplastic samples.

Petroleum polymers contribute to non-degradable waste materials and it would therefore be desirable to produce ecofriendly degradable materials. Biodegradation of polyhydroxybutyrate (PHB) in the presence of oligomer hydrolase and PHB depolymerase gave 3-hydroxybutyric acid which could be oxidized to acetyl acetate. Several bacteria and fungi can degrade PHB in the soil. Biodegradation of PHB showed a significant decrease in the molecular weight (Mw), number-average molecular weight (Mn) and the dispersity (Mw/Mn) for all the film formulations. Nanofibers of PHB and its composites showed faster degradation compared to other films and displayed complete degradation after 3 weeks. The SEM micrographs showed various surface morphology changes including alterations in appearance of pores, cavity, grooves, incisions, slots and pointers. Such changes were due to the growth of microorganisms that secreted PHB depolymerase enzyme which lead to the biopolymer films degradation. However, PHB nanofibers and its composites films in the presence of TiO2 demonstrated more surface changes with rupture of most nanofibers in which there was a drop in fibres diameter. The degradation of biopolymers help to overcome some of the pollution problems associated with the use of petroleum polymers. PHB nanofiber and its TiO2 composite were degraded faster compared to other PHB film types due to their three dimensional and high surface area structures. The presence of TiO2 nanoparticles in the composite films slowdown the degradation process compared to PHB films. Additionally, the PHB and its composite films that were prepared from UV treated PHB films led to acceleration of the degradation.

/pdf/biodegradation-of-different-formulations-of-1jzmttimcz.pdf

Biodegradation of different formulations of polyhydroxybutyrate films in soil

Seven new sesquiterpenes (1-7), together with seven known sesquiterpenes, aplysin (8), aplysinol (9), gossonorol (10), 7,10-epoxy-ar-bisabol-11-ol (11), 10-epi-7,10-epoxy-ar-bisabol-11-ol (12), johnstonol (13), and laurebiphenyl (14), have been isolated from the red alga Laurencia tristicha. The structures of new compounds were established as laur-11-en-2,10-diol (1), laur-11-en-10-ol (2), laur-11-en-1,10-diol (3), 4-bromo-1,10-epoxylaur-11-ene (4), cyclolauren-2-ol (5), laurentristich-4-ol (6), and ar-bisabol-9-en-7,11-diol (7) by means of spectroscopic methods including IR, HRMS, and ID and 21) NMR techniques. Compound 6 possessed a novel rearranged skeleton. All compounds were tested against several human cancer cell lines including lung adenocarcinoma (A549), stomach cancer (BGC-823), hepatoma (Bel 7402), colon cancer (HCT-8), and HELA cell lines. Laurebiphenyl (14) showed moderate cytotoxicity against all tested cell lines, with IC50 values of 1.68, 1.22, 1.91, 1.77, and 1.61 mu g/mL, respectively. Other compounds were inactive (IC50 > 10 mu g/mL).

Sesquiterpenes from the red alga Laurencia tristicha.

Background
Schiff's bases are excellent ligands which are synthesized from the condensation of primary amines with carbonyl groups.

/pdf/synthesis-and-characterization-of-schiff-s-bases-of-4mpubrp0vy.pdf

Synthesis and characterization of Schiff's bases of sulfamethoxazole

Five new thiophenes, namely, N-[(3-bromo-2-methylthiophen-5-yl)methylene]-4-methoxyaniline (4a), N-[(3-bromo-2-methylthiophen-5-yl)methylene]-3,4-dimethoxyaniline (4b), N-[(3-bromo-2-methylthiophen-5-yl)methylene]-3,4-dimethylaniline (4c), 3-[(3-bromo-2-methylthiophen-5-yl)methyleneamino]-2-methylquinazolin-4(3H)-one (4d), and 3-[(3-bromo-2-methylthiophen-5-yl)methyleneamino]-2-isopropylquinazolin-4(3H)-one (4e), have been synthesized. All of these materials brought about a reduction in the level of photodegradation of poly(vinyl chloride) (PVC) films containing the synthesized thiophenes (0.5%; by weight). The results obtained showed that the extent of photostabilization of PVC in the presence of an additive was in the order 4e > 4d > 4b > 4a > 4c. For the most favorable additive (4e), the rate of appearance of infrared absorption bands of degradation products was reduced by around two-thirds, while the quantum yield of chain scission was calculated to be reduced by a factor of more than one thousand. It is suggested that the additives may help stabilize PVC by direct absorption of UV radiation and dissipation of the energy as heat or that electrostatic attraction between the additives and PVC may assist transfer of energy from excited state PVC to the additive, from where it can be dissipated.

/pdf/synthesis-of-new-thiophene-derivatives-and-their-use-as-4s37v9x5cq.pdf

Synthesis of new thiophene derivatives and their use as photostabilizers for rigid poly(vinyl chloride)

Series of coordination complexes of Ni(II), Cu(II), Zn(II), Cd(II) and Sn(II) metal with 4-amino-5-(pyridyl)-4H-1,2,4-triazole-3-thiol, as a ligand has been successfully prepared in alcoholic medium. The prepared complexes were characterized quantitatively and qualitatively by using: microelemental analysis, FTIR spectroscopy, UV-visible spectroscopy, 1H and 13C NMR, magnetic susceptibility and conductivity measurements. This triazole ligand act as bidentate that coordination to the metal ions through sulphur and amine group. According to the spectral data of the complexes a tetrahedral geometry was suggested for these complexes except Cu (II) complexes which exhibit a square structure.

/pdf/synthesis-and-characterization-of-transition-metal-complexes-237u9cyywp.pdf

Synthesis and characterization of transition metal complexes of 4-Amino-5-pyridyl-4H-1,2,4-triazole-3-thiol

Five Schiff bases derived from melamine have been used as efficient additives to reduce the process of photodegradation of poly(vinyl chloride) films. The performance of Schiff bases has been investigated using various techniques. Poly(vinyl chloride) films containing Schiff bases were irradiated with ultraviolet light and any changes in their infrared spectra, weight, and the viscosity of their average molecular weight were investigated. In addition, the surface morphology of the films was inspected using a light microscope, atomic force microscopy, and a scanning electron micrograph. The additives enhanced the films resistance against irradiation and the polymeric surface was much smoother in the presence of the Schiff bases compared with the blank film. Schiff bases containing an ortho-hydroxyl group on the aryl rings showed the greatest photostabilization effect, which may possibly have been due to the direct absorption of ultraviolet light. This phenomenon seems to involve the transfer of a proton as well as several intersystem crossing processes.

https://www.mdpi.com/1420-3049/24/4/803/pdf

The Morphology and Performance of Poly(Vinyl Chloride) Containing Melamine Schiff Bases against Ultraviolet Light.

Three new polyphosphates were synthesized in good yields by reacting diethylenetriamine with the appropriate phosphate ester in ethanol under acidic conditions. The polyphosphate structures were determined using FT-IR and 1H-NMR spectroscopies, and their elemental compositions were confirmed by EDX spectroscopy. Polyphosphates were added to poly(vinyl chloride) (PVC) at low concentrations to fabricate thin films. The PVC films were irradiated with ultraviolet light for long periods, and the effect of polyphosphates as the photostabilizer was investigated by determining changes in the infrared spectra (intensity of specific functional group peaks), reduction in molecular weight, weight loss, and surface morphology. Minimal changes were seen for PVC films containing polyphosphate compared to that for the blank film. In addition, optical, scanning electron, and atomic force microscopies were used to inspect the surface morphology of films. Undesirable changes due to photodegradation were negligible in PVC films containing additives compared to films containing no additives. In addition, the surfaces were smoother and more homogeneous. Polyphosphates, and in particular ones that contain an ortho-geometry, act as efficient photostabilizers to reduce the rate of photodegradation. Polyphosphates absorb ultraviolet light, chelate with polymeric chains, scavenge radical moieties, and decompose peroxide residues.

https://www.mdpi.com/2073-4360/12/1/193/pdf

Ahmed Ahmed

Papers

Synthesis and characterization of Schiff's bases of sulfamethoxazole

Synthesis of new thiophene derivatives and their use as photostabilizers for rigid poly(vinyl chloride)

Synthesis and characterization of transition metal complexes of 4-Amino-5-pyridyl-4H-1,2,4-triazole-3-thiol

The Morphology and Performance of Poly(Vinyl Chloride) Containing Melamine Schiff Bases against Ultraviolet Light.

Influence of Polyphosphates on the Physicochemical Properties of Poly (Vinyl Chloride) after Irradiation with Ultraviolet Light