This review describes a new paradigm of electronics based on the spin degree of freedom of the electron. Either adding the spin degree of freedom to conventional charge-based electronic devices or using the spin alone has the potential advantages of nonvolatility, increased data processing speed, decreased electric power consumption, and increased integration densities compared with conventional semiconductor devices. To successfully incorporate spins into existing semiconductor technology, one has to resolve technical issues such as efficient injection, transport, control and manipulation, and detection of spin polarization as well as spin-polarized currents. Recent advances in new materials engineering hold the promise of realizing spintronic devices in the near future. We review the current state of the spin-based devices, efforts in new materials fabrication, issues in spin transport, and optical spin manipulation.

http://science.sciencemag.org/content/sci/294/5546/1488.full.pdf

Spintronics: a spin-based electronics vision for the future.

Spintronics, or spin electronics, involves the study of active control and manipulation of spin degrees of freedom in solid-state systems. This article reviews the current status of this subject, including both recent advances and well-established results. The primary focus is on the basic physical principles underlying the generation of carrier spin polarization, spin dynamics, and spin-polarized transport in semiconductors and metals. Spin transport differs from charge transport in that spin is a nonconserved quantity in solids due to spin-orbit and hyperfine coupling. The authors discuss in detail spin decoherence mechanisms in metals and semiconductors. Various theories of spin injection and spin-polarized transport are applied to hybrid structures relevant to spin-based devices and fundamental studies of materials properties. Experimental work is reviewed with the emphasis on projected applications, in which external electric and magnetic fields and illumination by light will be used to control spin and charge dynamics to create new functionalities not feasible or ineffective with conventional electronics.

/pdf/spintronics-fundamentals-and-applications-2dx38n6phu.pdf

Spintronics: Fundamentals and applications

Ferromagnetism in manganese compound semiconductors not only opens prospects for tailoring magnetic and spin-related phenomena in semiconductors with a precision specific to III-V compounds but also addresses a question about the origin of the magnetic interactions that lead to a Curie temperature (T(C)) as high as 110 K for a manganese concentration of just 5%. Zener's model of ferromagnetism, originally proposed for transition metals in 1950, can explain T(C) of Ga(1-)(x)Mn(x)As and that of its II-VI counterpart Zn(1-)(x)Mn(x)Te and is used to predict materials with T(C) exceeding room temperature, an important step toward semiconductor electronics that use both charge and spin.

http://info.ifpan.edu.pl/SL-2/sl23sub/science_dietl.pdf

Zener Model Description of Ferromagnetism in Zinc-Blende Magnetic Semiconductors

REVIEW Semiconductor devices generally take advantage of the charge of electrons, whereas magnetic materials are used for recording information involving electron spin. To make use of both charge and spin of electrons in semiconductors, a high concentration of magnetic elements can be introduced in nonmagnetic III-V semiconductors currently in use for devices. Low solubility of magnetic elements was overcome by low-temperature nonequilibrium molecular beam epitaxial growth, and ferromagnetic (Ga,Mn)As was realized. Magnetotransport measurements revealed that the magnetic transition temperature can be as high as 110 kelvin. The origin of the ferromagnetic interaction is discussed. Multilayer heterostructures including resonant tunneling diodes (RTDs) have also successfully been fabricated. The magnetic coupling between two ferromagnetic (Ga,Mn)As films separated by a nonmagnetic layer indicated the critical role of the holes in the magnetic coupling. The magnetic coupling in all semiconductor ferromagnetic/nonmagnetic layered structures, together with the possibility of spin filtering in RTDs, shows the potential of the present material system for exploring new physics and for developing new functionality toward future electronics.

https://science.sciencemag.org/content/sci/281/5379/951.full.pdf

Making Nonmagnetic Semiconductors Ferromagnetic

Transparent electronics is today one of the most advanced topics for a wide range of device applications. The key components are wide bandgap semiconductors, where oxides of different origins play an important role, not only as passive component but also as active component, similar to what is observed in conventional semiconductors like silicon. Transparent electronics has gained special attention during the last few years and is today established as one of the most promising technologies for leading the next generation of flat panel display due to its excellent electronic performance. In this paper the recent progress in n- and p-type oxide based thin-film transistors (TFT) is reviewed, with special emphasis on solution-processed and p-type, and the major milestones already achieved with this emerging and very promising technology are summarizeed. After a short introduction where the main advantages of these semiconductors are presented, as well as the industry expectations, the beautiful history of TFTs is revisited, including the main landmarks in the last 80 years, finishing by referring to some papers that have played an important role in shaping transparent electronics. Then, an overview is presented of state of the art n-type TFTs processed by physical vapour deposition methods, and finally one of the most exciting, promising, and low cost but powerful technologies is discussed: solution-processed oxide TFTs. Moreover, a more detailed focus analysis will be given concerning p-type oxide TFTs, mainly centred on two of the most promising semiconductor candidates: copper oxide and tin oxide. The most recent data related to the production of complementary metal oxide semiconductor (CMOS) devices based on n- and p-type oxide TFT is also be presented. The last topic of this review is devoted to some emerging applications, finalizing with the main conclusions. Related work that originated at CENIMAT|I3N during the last six years is included in more detail, which has led to the fabrication of high performance n- and p-type oxide transistors as well as the fabrication of CMOS devices with and on paper.

Oxide Semiconductor Thin‐Film Transistors: A Review of Recent Advances

A new GaAs‐based diluted magnetic semiconductor, (Ga,Mn)As, was prepared by molecular beam epitaxy. The lattice constant of (Ga,Mn)As films was determined by x‐ray diffraction and shown to increase with the increase of Mn composition, x. Well‐aligned in‐plane ferromagnetic order was observed by magnetization measurements. Magnetotransport measurements revealed the occurrence of anomalous Hall effect in the (Ga,Mn)As layer.

(Ga,Mn)As: A new diluted magnetic semiconductor based on GaAs

Magnetotransport properties of $p$-type ferromagnetic (Ga,Mn)As, a diluted magnetic semiconductor based on III-V semiconductors, are measured and the $p\ensuremath{-}d$ exchange between holes and Mn $3d$ spins is determined. The ferromagnetic transition temperatures calculated based on the Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction using the exchange reproduce remarkably well the observed ferromagnetic transition temperatures, demonstrating that ferromagnetism of (Ga,Mn)As has its origin in the RKKY interaction mediated by holes.

Transport properties and origin of ferromagnetism in (Ga, Mn)As

Epitaxy of (Ga, Mn)As, a new diluted magnetic semiconductor based on GaAs

Nonmetal-metal-nonmetal transition and large negative magnetoresistance in (Ga, Mn)As/GaAs

Current–voltage characteristics of AlAs/GaAs/AlAs double barrier resonant tunneling diodes with ferromagnetic p-type (Ga, Mn)As on one side and p-type GaAs on the other have been studied. A series of resonant peaks have been observed in both polarities, i.e., injecting holes from p-type GaAs and from (Ga, Mn)As. When holes are injected from the (Ga, Mn)As side, spontaneous resonant peak splitting has been observed below the ferromagnetic transition temperature of (Ga, Mn)As without magnetic field. The temperature dependence of the splitting is explained by the the spontaneous spin splitting in the valence band of ferromagnetic (Ga, Mn)As.

/pdf/spontaneous-splitting-of-ferromagnetic-ga-mn-as-valence-band-4om8p3413s.pdf

Aidong Shen

Papers

(Ga,Mn)As: A new diluted magnetic semiconductor based on GaAs

Transport properties and origin of ferromagnetism in (Ga, Mn)As

Epitaxy of (Ga, Mn)As, a new diluted magnetic semiconductor based on GaAs

Nonmetal-metal-nonmetal transition and large negative magnetoresistance in (Ga, Mn)As/GaAs

Spontaneous splitting of ferromagnetic (Ga, Mn)As valence band observed by resonant tunneling spectroscopy