scispace - formally typeset
Search or ask a question
Author

Ajit Mal

Bio: Ajit Mal is an academic researcher from University of California, Los Angeles. The author has contributed to research in topics: Lamb waves & Composite laminates. The author has an hindex of 38, co-authored 205 publications receiving 7217 citations. Previous affiliations of Ajit Mal include University of Southern California & California Institute of Technology.


Papers
More filters
Journal ArticleDOI
01 Mar 2002-Science
TL;DR: A transparent organic polymeric material that can repeatedly mend or “re-mend” itself under mild conditions and is a tough solid at room temperature and below with mechanical properties equaling those of commercial epoxy resins.
Abstract: We have developed a transparent organic polymeric material that can repeatedly mend or "re-mend" itself under mild conditions. The material is a tough solid at room temperature and below with mechanical properties equaling those of commercial epoxy resins. At temperatures above 120 degrees C, approximately 30% (as determined by solid-state nuclear magnetic resonance spectroscopy) of "intermonomer" linkages disconnect but then reconnect upon cooling, This process is fully reversible and can be used to restore a fractured part of the polymer multiple times, and it does not require additional ingredients such as a catalyst, additional monomer, or special surface treatment of the fractured interface.

2,154 citations

Journal ArticleDOI
TL;DR: In this paper, two new remendable highly cross-linked polymers, 2ME4F and 2MEP4F, were prepared without solvent, and they were used to study the thermal reversibility of Diels−Alder (DA) cross-linking, and it was found that DA connections and disconnections are thermally reversible.
Abstract: Two new remendable highly cross-linked polymers, 2ME4F and 2MEP4F, were prepared without solvent. Solid-state NMR (nuclear magnetic resonance) was used to study the thermal reversibility of Diels−Alder (DA) cross-linking, and it was found that DA connections and disconnections of both polymers are thermally reversible. Differential scanning calorimeter and dynamical mechanical analysis were applied to study thermal and mechanical properties of these materials, and it is found that the glass transition temperature (Tg) of 2ME4F is about 30−40 °C and that of 2MEP4F is about 80 °C. A qualitative study of the healing efficiency of 2MEP4F showed that cracks can be healed effectively with a simple thermal healing procedure. This process can be repeated to heal cracks multiple times.

653 citations

Journal ArticleDOI
TL;DR: In this article, a matrix method is presented for the solution of wave propagation problems in multilayered anisotropic media subjected to time harmonic disturbances, which leads to stable numerical schemes for the evaluation of the displacement and stress fields within the laminate.

196 citations

Book
01 Nov 1990
TL;DR: A review of the elementary theory of elasticity Cartesian tensors kinematics of deformation balance laws and analysis of stress constitutive equations elastostatics solution of linear ELSTostatic problems by special technique linear elastodynamics can be found in this article.
Abstract: A review of the elementary theory of elasticity Cartesian tensors kinematics of deformation balance laws and analysis of stress constitutive equations elastostatics solution of linear elastostatic problems by special technique linear elastodynamics.

181 citations


Cited by
More filters
01 May 1993
TL;DR: Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems.
Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

29,323 citations

Journal ArticleDOI
TL;DR: Technical challenges that must be addressed if SHM is to gain wider application are discussed in a general manner and the historical overview and summarizing the SPR paradigm are provided.
Abstract: This introduction begins with a brief history of SHM technology development. Recent research has begun to recognise that a productive approach to the Structural Health Monitoring (SHM) problem is to regard it as one of statistical pattern recognition (SPR); a paradigm addressing the problem in such a way is described in detail herein as it forms the basis for the organisation of this book. In the process of providing the historical overview and summarising the SPR paradigm, the subsequent chapters in this book are cited in an effort to show how they fit into this overview of SHM. In the conclusions are stated a number of technical challenges that the authors believe must be addressed if SHM is to gain wider acceptance.

2,152 citations

Journal ArticleDOI
TL;DR: Electronic networks comprised of flexible, stretchable, and robust devices that are compatible with large-area implementation and integrated with multiple functionalities is a testament to the progress in developing an electronic skin akin to human skin.
Abstract: Human skin is a remarkable organ. It consists of an integrated, stretchable network of sensors that relay information about tactile and thermal stimuli to the brain, allowing us to maneuver within our environment safely and effectively. Interest in large-area networks of electronic devices inspired by human skin is motivated by the promise of creating autonomous intelligent robots and biomimetic prosthetics, among other applications. The development of electronic networks comprised of flexible, stretchable, and robust devices that are compatible with large-area implementation and integrated with multiple functionalities is a testament to the progress in developing an electronic skin (e-skin) akin to human skin. E-skins are already capable of providing augmented performance over their organic counterpart, both in superior spatial resolution and thermal sensitivity. They could be further improved through the incorporation of additional functionalities (e.g., chemical and biological sensing) and desired properties (e.g., biodegradability and self-powering). Continued rapid progress in this area is promising for the development of a fully integrated e-skin in the near future.

1,950 citations

Journal ArticleDOI
18 Nov 2011-Science
TL;DR: In this paper, the authors designed epoxy networks that can rearrange their topology by exchange reactions without depolymerization, and showed that they are insoluble and processable.
Abstract: Permanently cross-linked materials have outstanding mechanical properties and solvent resistance, but they cannot be processed and reshaped once synthesized Non–cross-linked polymers and those with reversible cross-links are processable, but they are soluble We designed epoxy networks that can rearrange their topology by exchange reactions without depolymerization and showed that they are insoluble and processable Unlike organic compounds and polymers whose viscosity varies abruptly near the glass transition, these networks show Arrhenius-like gradual viscosity variations like those of vitreous silica Like silica, the materials can be wrought and welded to make complex objects by local heating without the use of molds The concept of a glass made by reversible topology freezing in epoxy networks can be readily scaled up for applications and generalized to other chemistries

1,901 citations

Journal ArticleDOI
TL;DR: In this article, a route for the controlled synthesis of mesoporous polymer nanospheres, which can be further converted into carbon nanosphere through carbonization, is presented.
Abstract: The controlled synthesis of monodisperse nanospheres faces a number of difficulties, such as extensive crosslinking during hydrothermal processes. Here, the authors show a route for the controlled synthesis of mesoporous polymer nanospheres, which can be further converted into carbon nanospheres through carbonization.

1,542 citations