Ajit Mal

Bio: Ajit Mal is an academic researcher from University of California, Los Angeles. The author has contributed to research in topics: Lamb waves & Composite laminates. The author has an hindex of 38, co-authored 205 publications receiving 7217 citations. Previous affiliations of Ajit Mal include University of Southern California & California Institute of Technology.

Composite Materials NDE Using Enhanced Leaky Lamb Wave Dispersion Data Acquisition Method

Abstract: The leaky Lamb wave (LLW) technique is approaching a maturity level that is making it an attractive quantitative NDE tool for composites and bonded joints. Since it was first observed in 1982, the phenomenon has been studied extensively, particularly in composite materials. The wave is induced by oblique insonification using a pitch-catch arrangement and the plate wave modes are detected by identifying minima in the reflected spectra to obtain the dispersion data. The wave behavior in multi-orientation laminates has been well documented and corroborated experimentally with high accuracy. The sensitivity of the wave to the elastic constants of the material and to the boundary conditions led to the capability to measure the elastic properties of bonded joints. Recently, the authors significantly enhanced the LLW method's capability by increasing the speed of the data acquisition, the number of modes that can be identified and the accuracy of the data inversion. In spite of the theoretical and experimental progress, methods that employ oblique insonification of composites are still not being applied as standard industrial NDE methods. The authors investigated the issues that are hampering the transition of the LLW to industrial applications and identified 4 key issues. The current capability of the method and the nature of these issues are described in this paper.

Ultrasonic Guided Waves for Hidden Damage Detection in Composite Structures: Theory and Experiments

Abstract: In this paper the theoretical knowledge base required for the ­development of a reliable structural health monitoring system based on ultrasonic guided waves is considered. An exact theory is used for relatively rapid calculation of the PZT driven surface motion in a plate recorded in an ultrasonic experiment. The theoretical results are compared with those obtained from an explicit finite element code for their mutual verification, showing excellent agreement. To determine the location and the severity of a damage with a minimal operator intervention, the ultrasonic wave propagation data are analyzed using a damage index approach carefully designed to overcome the complexity and variability of the signals in the presence of damage as well as the geometric complexity of the structure.

Ultrasonic System Measures Elastic Properties Of Composites

Abstract: Measurements with leaky Lamb waves yield data on properties and defects of panels. System nondestructively measures elastic properties of, and defects in, panel of laminated fiber/matrix material. Ultrasonic transducers operating in pitch/catch mode excite and detect leaky Lamb waves in specimen. Elastic properties of specimen and defects within it characterized from dispersion curves of Lamb waves.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

An introduction to structural health monitoring

Abstract: This introduction begins with a brief history of SHM technology development. Recent research has begun to recognise that a productive approach to the Structural Health Monitoring (SHM) problem is to regard it as one of statistical pattern recognition (SPR); a paradigm addressing the problem in such a way is described in detail herein as it forms the basis for the organisation of this book. In the process of providing the historical overview and summarising the SPR paradigm, the subsequent chapters in this book are cited in an effort to show how they fit into this overview of SHM. In the conclusions are stated a number of technical challenges that the authors believe must be addressed if SHM is to gain wider acceptance.

25th Anniversary Article: The Evolution of Electronic Skin (E-Skin): A Brief History, Design Considerations, and Recent Progress

Abstract: Human skin is a remarkable organ. It consists of an integrated, stretchable network of sensors that relay information about tactile and thermal stimuli to the brain, allowing us to maneuver within our environment safely and effectively. Interest in large-area networks of electronic devices inspired by human skin is motivated by the promise of creating autonomous intelligent robots and biomimetic prosthetics, among other applications. The development of electronic networks comprised of flexible, stretchable, and robust devices that are compatible with large-area implementation and integrated with multiple functionalities is a testament to the progress in developing an electronic skin (e-skin) akin to human skin. E-skins are already capable of providing augmented performance over their organic counterpart, both in superior spatial resolution and thermal sensitivity. They could be further improved through the incorporation of additional functionalities (e.g., chemical and biological sensing) and desired properties (e.g., biodegradability and self-powering). Continued rapid progress in this area is promising for the development of a fully integrated e-skin in the near future.

Silica-Like Malleable Materials from Permanent Organic Networks

Abstract: Permanently cross-linked materials have outstanding mechanical properties and solvent resistance, but they cannot be processed and reshaped once synthesized Non–cross-linked polymers and those with reversible cross-links are processable, but they are soluble We designed epoxy networks that can rearrange their topology by exchange reactions without depolymerization and showed that they are insoluble and processable Unlike organic compounds and polymers whose viscosity varies abruptly near the glass transition, these networks show Arrhenius-like gradual viscosity variations like those of vitreous silica Like silica, the materials can be wrought and welded to make complex objects by local heating without the use of molds The concept of a glass made by reversible topology freezing in epoxy networks can be readily scaled up for applications and generalized to other chemistries

A facile soft-template synthesis of mesoporous polymeric and carbonaceous nanospheres

Abstract: The controlled synthesis of monodisperse nanospheres faces a number of difficulties, such as extensive crosslinking during hydrothermal processes. Here, the authors show a route for the controlled synthesis of mesoporous polymer nanospheres, which can be further converted into carbon nanospheres through carbonization.