Akshay S. Chaudhari

Abstract: PURPOSE To develop a super-resolution technique using convolutional neural networks for generating thin-slice knee MR images from thicker input slices, and compare this method with alternative through-plane interpolation methods. METHODS We implemented a 3D convolutional neural network entitled DeepResolve to learn residual-based transformations between high-resolution thin-slice images and lower-resolution thick-slice images at the same center locations. DeepResolve was trained using 124 double echo in steady-state (DESS) data sets with 0.7-mm slice thickness and tested on 17 patients. Ground-truth images were compared with DeepResolve, clinically used tricubic interpolation, and Fourier interpolation methods, along with state-of-the-art single-image sparse-coding super-resolution. Comparisons were performed using structural similarity, peak SNR, and RMS error image quality metrics for a multitude of thin-slice downsampling factors. Two musculoskeletal radiologists ranked the 3 data sets and reviewed the diagnostic quality of the DeepResolve, tricubic interpolation, and ground-truth images for sharpness, contrast, artifacts, SNR, and overall diagnostic quality. Mann-Whitney U tests evaluated differences among the quantitative image metrics, reader scores, and rankings. Cohen's Kappa (κ) evaluated interreader reliability. RESULTS DeepResolve had significantly better structural similarity, peak SNR, and RMS error than tricubic interpolation, Fourier interpolation, and sparse-coding super-resolution for all downsampling factors (p < .05, except 4 × and 8 × sparse-coding super-resolution downsampling factors). In the reader study, DeepResolve significantly outperformed (p < .01) tricubic interpolation in all image quality categories and overall image ranking. Both readers had substantial scoring agreement (κ = 0.73). CONCLUSION DeepResolve was capable of resolving high-resolution thin-slice knee MRI from lower-resolution thicker slices, achieving superior quantitative and qualitative diagnostic performance to both conventionally used and state-of-the-art methods.

Abstract: BACKGROUND Super-resolution is an emerging method for enhancing MRI resolution; however, its impact on image quality is still unknown. PURPOSE To evaluate MRI super-resolution using quantitative and qualitative metrics of cartilage morphometry, osteophyte detection, and global image blurring. STUDY TYPE Retrospective. POPULATION In all, 176 MRI studies of subjects at varying stages of osteoarthritis. FIELD STRENGTH/SEQUENCE Original-resolution 3D double-echo steady-state (DESS) and DESS with 3× thicker slices retrospectively enhanced using super-resolution and tricubic interpolation (TCI) at 3T. ASSESSMENT A quantitative comparison of femoral cartilage morphometry was performed for the original-resolution DESS, the super-resolution, and the TCI scans in 17 subjects. A reader study by three musculoskeletal radiologists assessed cartilage image quality, overall image sharpness, and osteophytes incidence in all three sets of scans. A referenceless blurring metric evaluated blurring in all three image dimensions for the three sets of scans. STATISTICAL TESTS Mann-Whitney U-tests compared Dice coefficients (DC) of segmentation accuracy for the DESS, super-resolution, and TCI images, along with the image quality readings and blurring metrics. Sensitivity, specificity, and diagnostic odds ratio (DOR) with 95% confidence intervals compared osteophyte detection for the super-resolution and TCI images, with the original-resolution as a reference. RESULTS DC for the original-resolution (90.2 ± 1.7%) and super-resolution (89.6 ± 2.0%) were significantly higher (P < 0.001) than TCI (86.3 ± 5.6%). Segmentation overlap of super-resolution with the original-resolution (DC = 97.6 ± 0.7%) was significantly higher (P < 0.0001) than TCI overlap (DC = 95.0 ± 1.1%). Cartilage image quality for sharpness and contrast levels, and the through-plane quantitative blur factor for super-resolution images, was significantly (P < 0.001) better than TCI. Super-resolution osteophyte detection sensitivity of 80% (76-82%), specificity of 93% (92-94%), and DOR of 32 (22-46) was significantly higher (P < 0.001) than TCI sensitivity of 73% (69-76%), specificity of 90% (89-91%), and DOR of 17 (13-22). DATA CONCLUSION Super-resolution appears to consistently outperform naive interpolation and may improve image quality without biasing quantitative biomarkers. LEVEL OF EVIDENCE 2 Technical Efficacy: Stage 2 J. Magn. Reson. Imaging 2020;51:768-779.

Abstract: Purpose To introduce a simple analytical formula for estimating T 2 from a single Double-Echo in Steady-State (DESS) scan. Methods Extended Phase Graph (EPG) modeling was used to develop a straightforward linear approximation of the relationship between the two DESS signals, enabling accurate T 2 estimation from one DESS scan. Simulations were performed to demonstrate cancellation of different echo pathways to validate this simple model. The resulting analytic formula was compared to previous methods for T 2 estimation using DESS and fast spin-echo scans in agar phantoms and knee cartilage in three volunteers and three patients. The DESS approach allows 3D (256 × 256 × 44) T 2 -mapping with fat suppression in scan times of 3–4 min. Results The simulations demonstrated that the model approximates the true signal very well. If the T 1 is within 20% of the assumed T 1 , the T 2 estimation error was shown to be less than 5% for typical scans. The inherent residual error in the model was demonstrated to be small both due to signal decay and opposing signal contributions. The estimated T 2 from the linear relationship agrees well with reference scans, both for the phantoms and in vivo. The method resulted in less underestimation of T 2 than previous single-scan approaches, with processing times 60 times faster than using a numerical fit. Conclusion A simplified relationship between the two DESS signals allows for rapid 3D T 2 quantification with DESS that is accurate, yet also simple. The simplicity of the method allows for immediate T 2 estimation in cartilage during the MRI examination.

Abstract: Background Biomarkers for assessing osteoarthritis activity necessitate multiple MRI sequences with long acquisition times. Purpose To perform 5-minute simultaneous morphometry (thickness/volume measurements) and T2 relaxometry of both cartilage and meniscus, and semiquantitative MRI Osteoarthritis Knee Scoring (MOAKS). Study Type Prospective. Subjects Fifteen healthy volunteers for morphometry and T2 measurements, and 15 patients (five each Kellgren–Lawrence grades 0/2/3) for MOAKS assessment. Field Strength/Sequence A 5-minute double-echo steady-state (DESS) sequence was evaluated for generating quantitative and semiquantitative osteoarthritis biomarkers at 3T. Assessment Flip angle simulations evaluated tissue signals and sensitivity of T2 measurements. Morphometry and T2 reproducibility was compared against morphometry-optimized and relaxometry-optimized sequences. Repeatability was assessed by scanning five volunteers twice. MOAKS reproducibility was compared to MOAKS derived from a clinical knee MRI protocol by two readers. Statistical Tests Coefficients of variation (CVs), concordance confidence intervals (CCI), and Wilcoxon signed-rank tests compared morphometry and relaxometry measurements with their reference standards. DESS MOAKS positive percent agreement (PPA), negative percentage agreement (NPA), and interreader agreement was calculated using the clinical protocol as a reference. Biomarker variations between Kellgren–Lawrence groups were evaluated using Wilcoxon rank-sum tests. Results Cartilage thickness (P = 0.65), cartilage T2 (P = 0.69), and meniscus T2 (P = 0.06) did not significantly differ from their reference standard (with a 20° DESS flip angle). DESS slightly overestimated meniscus volume (P < 0.001). Accuracy and repeatability CVs were <3.3%, except the meniscus T2 accuracy (7.6%). DESS MOAKS had substantial interreader agreement and high PPA/NPA values of 87%/90%. Bone marrow lesions and menisci had slightly lower PPAs. Cartilage and meniscus T2, and MOAKS (cartilage surface area, osteophytes, cysts, and total score) was higher in Kellgren–Lawrence groups 2 and 3 than group 0 (P < 0.05). Data Conclusion The 5-minute DESS sequence permits MOAKS assessment for a majority of tissues, along with repeatable and reproducible simultaneous cartilage and meniscus T2 relaxometry and morphometry measurements. Level of Evidence: 2 Technical Efficacy: Stage 1 J. Magn. Reson. Imaging 2017.

Abstract: Purpose To develop a robust multidimensional deep-learning based method to simultaneously generate accurate neurite orientation dispersion and density imaging (NODDI) and generalized fractional anisotropy (GFA) parameter maps from undersampled q-space datasets for use in stroke imaging. Methods Traditional diffusion spectrum imaging (DSI) capable of producing accurate NODDI and GFA parameter maps requires hundreds of q-space samples which renders the scan time clinically untenable. A convolutional neural network (CNN) was trained to generated NODDI and GFA parameter maps simultaneously from 10× undersampled q-space data. A total of 48 DSI scans from 15 stroke patients and 14 normal subjects were acquired for training, validating, and testing this method. The proposed network was compared to previously proposed voxel-wise machine learning based approaches for q-space imaging. Network-generated images were used to predict stroke functional outcome measures. Results The proposed network achieves significant performance advantages compared to previously proposed machine learning approaches, showing significant improvements across image quality metrics. Generating these parameter maps using CNNs also comes with the computational benefits of only needing to generate and train a single network instead of multiple networks for each parameter type. Post-stroke outcome prediction metrics do not appreciably change when using images generated from this proposed technique. Over three test participants, the predicted stroke functional outcome scores were within 1-6% of the clinical evaluations. Conclusions Estimates of NODDI and GFA parameters estimated simultaneously with a deep learning network from highly undersampled q-space data were improved compared to other state-of-the-art methods providing a 10-fold reduction scan time compared to conventional methods.

Abstract: The Martini model, a coarse-grained force field for biomolecular simulations, has found a broad range of applications since its release a decade ago. Based on a building block principle, the model combines speed and versatility while maintaining chemical specificity. Here we review the current state of the model. We describe recent highlights as well as shortcomings, and our ideas on the further development of the model.

Abstract: The Martini coarse-grained force field has been successfully used for simulating a wide range of (bio)molecular systems. Recent progress in our ability to test the model against fully atomistic force fields, however, has revealed some shortcomings. Most notable, phenylalanine and proline were too hydrophobic, and dimers formed by polar residues in apolar solvents did not bind strongly enough. Here, we reparametrize these residues either through reassignment of particle types or by introducing embedded charges. The new parameters are tested with respect to partitioning across a lipid bilayer, membrane binding of Wimley–White peptides, and dimerization free energy in solvents of different polarity. In addition, we improve some of the bonded terms in the Martini protein force field that lead to a more realistic length of α-helices and to improved numerical stability for polyalanine and glycine repeats. The new parameter set is denoted Martini version 2.2.