Alan W. Hoffman

Bio: Alan W. Hoffman is an academic researcher from Raytheon. The author has contributed to research in topics: Detector & Large format. The author has an hindex of 17, co-authored 51 publications receiving 4045 citations.

The Infrared Array Camera (IRAC) for the Spitzer Space Telescope

Abstract: The Infrared Array Camera (IRAC) is one of three focal plane instruments on the Spitzer Space Telescope. IRAC is a four-channel camera that obtains simultaneous broadband images at 3.6, 4.5, 5.8, and 8.0 � m. Two nearly adjacent 5A2 ; 5A2 fields of view in the focal plane are viewed by the four channels in pairs (3.6 and 5.8 � m; 4.5 and 8 � m). All four detector arrays in the camera are 256 ; 256 pixels in size, with the two shorter wavelength channels using InSb and the two longer wavelength channels using Si:As IBC detectors. IRAC is a powerful survey instrument because of its high sensitivity, large field of view, and four-color imaging. This paper summarizes the in-flight scientific, technical, and operational performance of IRAC.

CMOS Detector Technology

Abstract: An entry level overview of state-of-the-art CMOS detector technology is presented. Operating principles and system architecture are explained in comparison to the well-established CCD technology, followed by a discussion of important benefits of modern CMOS-based detector arrays. A number of unique CMOS features including different shutter modes and scanning concepts are described. In addition, sub-field stitching is presented as a technique for producing very large imagers. After a brief introduction to the concept of monolithic CMOS sensors, hybrid detectors technology is introduced. A comparison of noise reduction methods for CMOS hybrids is presented. The final sections review CMOS fabrication processes for monolithic and vertically integrated image sensors.

Commentary: JWST near-infrared detector degradation— finding the problem, fixing the problem, and moving forward

Abstract: The James Webb Space Telescope (JWST) is the successor to the Hubble Space Telescope. JWST will be an infrared-optimized telescope, with an approximately 6.5 m diameter primary mirror, that is located at the Sun-Earth L2 Lagrange point. Three of JWST’s four science instruments use Teledyne HgCdTe HAWAII-2RG (H2RG) near infrared detector arrays. During 2010, the JWST Project noticed that a few of its 5 μm cutoff H2RG detectors were degrading during room temperature storage, and NASA chartered a “Detector Degradation Failure Review Board” (DD-FRB) to investigate. The DD-FRB determined that the root cause was a design flaw that allowed indium to interdiffuse with the gold contacts and migrate into the HgCdTe detector layer. Fortunately, Teledyne already had an improved design that eliminated this degradation mechanism. During early 2012, the improved H2RG design was qualified for flight and JWST began making additional H2RGs. In this article, we present the two public DD-FRB “Executive Summaries” that: (1) determined the root cause of the detector degradation and (2) defined tests to determine whether the existing detectors are qualified for flight. We supplement these with a brief introduction to H2RG detector arrays, some recent measurements showing that the performance of the improved design meets JWST requirements, and a discussion of how the JWST Project is using cryogenic storage to retard the degradation rate of the existing flight spare H2RGs.

Development of infrared focal plane arrays for space

Abstract: Space astronomy requires large-area cryogenic infrared focal plane arrays (FPAs) with high quantum efficiency, extremely low dark current, low power dissipation, and background limited noise performance. To meet these requirements, especially at temperatures of 5–15 K, Santa Barbara Research Center designed and fabricated a new multiplexer, CRC-744. The FPAs made by bonding InSb detector arrays to CRC-744 multiplexers were evaluated at the University of Rochester. The best array achieved the read noise of 5 e − with 12 s integration and 7 e − with 200 s integration with Fowler-64 sampling at 15 K, the average dark current of <0.2 e−/ s at both 15 and 29 K, and the average quantum efficiency of 87% at both 15 and 29 K. The 10%–90% rise time was 4 μs driving a 600 pF external load. The power dissipation was 0.3–0.4 mW when running flat-out (100% duty cycle). The full well capacity was 105 e− (230 mV) with 400 mV of applied bias. The above test results demonstrate that the FPAs meet background-limited space ...

Yardstick integrated science instrument module concept for NGST

Abstract: We describe the instrument package concept that we have investigated as part of the Goddard Space Flight Center study for NGST It is composed of highly integrated, high performance cameras and spectrometers covering the spectral region from 06 to 30 microns and with a large field of viewthe suite has been configured to reduce cost and complexity with no sacrifice in scientific merit A common optical bench minimizes interfaces, a guiding system integrated in the science module makes use of the science cameras with minimal penalty to science, and all near IR instruments are built around the same detector module

The Infrared Array Camera (IRAC) for the Spitzer Space Telescope

Abstract: The Infrared Array Camera (IRAC) is one of three focal plane instruments in the Spitzer Space Telescope. IRAC is a four-channel camera that obtains simultaneous broad-band images at 3.6, 4.5, 5.8, and 8.0 microns. Two nearly adjacent 5.2x5.2 arcmin fields of view in the focal plane are viewed by the four channels in pairs (3.6 and 5.8 microns; 4.5 and 8 microns). All four detector arrays in the camera are 256x256 pixels in size, with the two shorter wavelength channels using InSb and the two longer wavelength channels using Si:As IBC detectors. IRAC is a powerful survey instrument because of its high sensitivity, large field of view, and four-color imaging. This paper summarizes the in-flight scientific, technical, and operational performance of IRAC.

The Infrared Array Camera (IRAC) for the Spitzer Space Telescope

Abstract: The Infrared Array Camera (IRAC) is one of three focal plane instruments on the Spitzer Space Telescope. IRAC is a four-channel camera that obtains simultaneous broadband images at 3.6, 4.5, 5.8, and 8.0 � m. Two nearly adjacent 5A2 ; 5A2 fields of view in the focal plane are viewed by the four channels in pairs (3.6 and 5.8 � m; 4.5 and 8 � m). All four detector arrays in the camera are 256 ; 256 pixels in size, with the two shorter wavelength channels using InSb and the two longer wavelength channels using Si:As IBC detectors. IRAC is a powerful survey instrument because of its high sensitivity, large field of view, and four-color imaging. This paper summarizes the in-flight scientific, technical, and operational performance of IRAC.

The Spitzer Space Telescope mission

Abstract: The Spitzer Space Telescope, NASA's Great Observatory for infrared astronomy, was launched 2003 August 25 and is returning excellent scientific data from its Earth-trailing solar orbit. Spitzer combines the intrinsic sensitivity achievable with a cryogenic telescope in space with the great imaging and spectroscopic power of modern detector arrays to provide the user community with huge gains in capability for exploration of the cosmos in the infrared. The observatory systems are largely performing as expected, and the projected cryogenic lifetime is in excess of 5 years. This paper summarizes the on-orbit scientific, technical, and operational performance of Spitzer. Subsequent papers in this special issue describe the Spitzer instruments in detail and highlight many of the exciting scientific results obtained during the first 6 months of the Spitzer mission.

The Star Formation Efficiency in Nearby Galaxies: Measuring Where Gas Forms Stars Effectively

Abstract: We measure the star formation efficiency (SFE), the star formation rate (SFR) per unit of gas, in 23 nearby galaxies and compare it with expectations from proposed star formation laws and thresholds. We use H I maps from The H I Nearby Galaxy Survey (THINGS) and derive H2 maps of CO measured by HERA CO-Line Extragalactic Survey and Berkeley-Illinois-Maryland Association Survey of Nearby Galaxies. We estimate the SFR by combining Galaxy Evolution Explorer (GALEX) far-ultraviolet maps and the Spitzer Infrared Nearby Galaxies Survey (SINGS) 24 ?m maps, infer stellar surface density profiles from SINGS 3.6 ?m data, and use kinematics from THINGS. We measure the SFE as a function of the free fall and orbital timescales, midplane gas pressure, stability of the gas disk to collapse (including the effects of stars), the ability of perturbations to grow despite shear, and the ability of a cold phase to form. In spirals, the SFE of H2 alone is nearly constant at (5.25 ? 2.5) ? 10?10 yr?1 (equivalent to an H2 depletion time of 1.9 ? 109 yr) as a function of all of these variables at our 800 pc resolution. Where the interstellar medium (ISM) is mostly H I, however, the SFE decreases with increasing radius in both spiral and dwarf galaxies, a decline reasonably described by an exponential with scale length 0.2r 25-0.25r 25. We interpret this decline as a strong dependence of giant molecular cloud (GMC) formation on environment. The ratio of molecular-to-atomic gas appears to be a smooth function of radius, stellar surface density, and pressure spanning from the H2-dominated to H I-dominated ISM. The radial decline in SFE is too steep to be reproduced only by increases in the free-fall time or orbital time. Thresholds for large-scale instability suggest that our disks are stable or marginally stable and do not show a clear link to the declining SFE. We suggest that ISM physics below the scales that we observe?phase balance in the H I, H2 formation and destruction, and stellar feedback?governs the formation of GMCs from H I.

The reversal of the star formation-density relation in the distant universe

Abstract: Aims We study the relationship between the local environment of galaxies and their star formation rate (SFR) in the Great Observatories Origins Deep Survey, GOODS, at z∼1 Methods We use ultradeep imaging at 24� m with the MIPS camera onboard Spitzer to determine the contribution of obscured light to the SFR of galaxies over the redshift range 08≤ z ≤12 Accurate galaxy densities are measured thanks to the large sample of ∼1200 spectroscopic redshifts with high (∼70 %) spectroscopic completeness Morphology and stellar masses are derived from deep HST-ACS imaging, supplemented by ground based imaging programs and photometry from the IRAC camera onboard Spitzer Results We show that the star formation‐density relation observed locally was reversed at z∼ 1: the average SFR of an individual galaxy increased with local galaxy density when the universe was less than half its present age Hierarchical galaxy for mation models (simulated lightcones from the Millennium model) predicted such a reversal to occur only at earlier epochs (z>2) and at a lower level We present a remarkable structure at z∼ 1016, containing X-ray traced galaxy concentrations, which will eventually merge into a Virgo-like cluster This structure illustrates how the ind ividual SFR of galaxies increases with density and shows that it is the∼1‐2 Mpc scale that affects most the star formation in galaxies at z∼ 1 The SFR of z∼ 1 galaxies is found to correlate with stellar mass suggesting that mass plays a role in the observed star formation‐density trend However the specific SFR ( =SFR/M⋆) decreases with stellar mass while it increases with galaxy density, which i mplies that the environment does directly affect the star formation activity of galaxies Major mergers do not appear to be the unique or even major cause for this effect since nearly half (46 %) of the luminous infrared galaxies (LIRGs) at z∼ 1 present the HST-ACS morphology of spirals, while only a third present a clear signature of major mergers The remaining galaxies are divided into compact (9 %) and irregular (14 %) galaxies Moreover, the specific SFR o f major mergers is only marginally stronger than that of spirals Conclusions These findings constrain the influence of the growth of large- scale structures on the star formation history of galaxies Reproducing the SFR‐density relation at z∼ 1 is a new challenge for models, requiring a correct balance between mass assembly through mergers and in-situ star formation at early epochs