Albert Bel

Bio: Albert Bel is an academic researcher from Pompeu Fabra University. The author has contributed to research in topics: Energy consumption & LPWAN. The author has an hindex of 12, co-authored 25 publications receiving 955 citations. Previous affiliations of Albert Bel include Autonomous University of Barcelona.

Opportunistic relay selection with outdated CSI: outage probability and diversity analysis

Abstract: In this paper, we analyze the outage probability and diversity order of opportunistic relay selection in a scenario based on decode and forward and where the available channel state information (CSI) is outdated. The study is conducted analytically by obtaining a closed-form expression for the outage probability, which is defined as the probability that the instantaneous capacity is below a target value. We derive high-SNR approximations for the outage probability. By doing so, we demonstrate that the diversity order of the system is reduced to 1 when CSI is outdated, being this behavior independent of the level of CSI accuracy. A physical explanation for this extreme loss of diversity is provided along with numerical results to support the analytical study.

IEEE 802.11ah: The Wi-Fi Approach for M2M Communications.

Abstract: M2M communications are projected to be one of the fastest growing technology segments of the IT sector in the next years. Sensor and actuator networks connect communication machines and devices so that they automatically transmit information, serving the growing demand for environmental data acquisition. IEEE 802.11ah Task Group addresses the creation of a new standard for giving response to the particular requirements of this type of networks: large number of power-constrained stations, long transmission range, small and infrequent data messages, low data-rates and non-critical delay. This article explores the key features of this new standard under development, especially those related to the reduction of energy consumption in the MAC Layer. In this direction, a performance assessment of IEEE 802.11ah in four typical M2M scenarios has been performed.

IEEE 802.11AH: the WiFi approach for M2M communications

Abstract: M2M communications are positioned to be one of the fastest growing technology segments in the next decade. Sensor and actuator networks connect communication machines and devices so that they automatically transmit information, serving the growing demand for environmental data acquisition. The IEEE 802.11ah Task Group is working on a new standard to address the particular requirements of M2M networks: a large number of power-constrained stations; a long transmission range; small and infrequent data messages; low data rates; and a non-critical delay. This article explores the key features of this new standard, especially those related to the reduction of energy consumption in the medium access control layer. Given these requirements, a performance assessment of IEEE 802.11ah in four common M2M scenarios, i.e. agriculture monitoring, smart metering, industrial automation, and animal monitoring, is presented.

A Survey of Indoor Localization Systems and Technologies

Abstract: Indoor localization has recently witnessed an increase in interest, due to the potential wide range of services it can provide by leveraging Internet of Things (IoT), and ubiquitous connectivity. Different techniques, wireless technologies and mechanisms have been proposed in the literature to provide indoor localization services in order to improve the services provided to the users. However, there is a lack of an up-to-date survey paper that incorporates some of the recently proposed accurate and reliable localization systems. In this paper, we aim to provide a detailed survey of different indoor localization techniques, such as angle of arrival (AoA), time of flight (ToF), return time of flight (RTOF), and received signal strength (RSS); based on technologies, such as WiFi, radio frequency identification device (RFID), ultra wideband (UWB), Bluetooth, and systems that have been proposed in the literature. This paper primarily discusses localization and positioning of human users and their devices. We highlight the strengths of the existing systems proposed in the literature. In contrast with the existing surveys, we also evaluate different systems from the perspective of energy efficiency, availability, cost, reception range, latency, scalability, and tracking accuracy. Rather than comparing the technologies or techniques, we compare the localization systems and summarize their working principle. We also discuss remaining challenges to accurate indoor localization.

Low Power Wide Area Networks: An Overview

Abstract: Low power wide area (LPWA) networks are attracting a lot of attention primarily because of their ability to offer affordable connectivity to the low-power devices distributed over very large geographical areas. In realizing the vision of the Internet of Things, LPWA technologies complement and sometimes supersede the conventional cellular and short range wireless technologies in performance for various emerging smart city and machine-to-machine applications. This review paper presents the design goals and the techniques, which different LPWA technologies exploit to offer wide-area coverage to low-power devices at the expense of low data rates. We survey several emerging LPWA technologies and the standardization activities carried out by different standards development organizations (e.g., IEEE, IETF, 3GPP, ETSI) as well as the industrial consortia built around individual LPWA technologies (e.g., LoRa Alliance, Weightless-SIG, and Dash7 alliance). We further note that LPWA technologies adopt similar approaches, thus sharing similar limitations and challenges. This paper expands on these research challenges and identifies potential directions to address them. While the proprietary LPWA technologies are already hitting the market with large nationwide roll-outs, this paper encourages an active engagement of the research community in solving problems that will shape the connectivity of tens of billions of devices in the next decade.

Internet of Things in the 5G Era: Enablers, Architecture, and Business Models

Abstract: The IoT paradigm holds the promise to revolutionize the way we live and work by means of a wealth of new services, based on seamless interactions between a large amount of heterogeneous devices. After decades of conceptual inception of the IoT, in recent years a large variety of communication technologies has gradually emerged, reflecting a large diversity of application domains and of communication requirements. Such heterogeneity and fragmentation of the connectivity landscape is currently hampering the full realization of the IoT vision, by posing several complex integration challenges. In this context, the advent of 5G cellular systems, with the availability of a connectivity technology, which is at once truly ubiquitous, reliable, scalable, and cost-efficient, is considered as a potentially key driver for the yet-to emerge global IoT. In the present paper, we analyze in detail the potential of 5G technologies for the IoT, by considering both the technological and standardization aspects. We review the present-day IoT connectivity landscape, as well as the main 5G enablers for the IoT. Last but not least, we illustrate the massive business shifts that a tight link between IoT and 5G may cause in the operator and vendors ecosystem.

A Study of LoRa: Long Range & Low Power Networks for the Internet of Things

Abstract: LoRa is a long-range, low-power, low-bitrate, wireless telecommunications system, promoted as an infrastructure solution for the Internet of Things: end-devices use LoRa across a single wireless hop to communicate to gateway(s), connected to the Internet and which act as transparent bridges and relay messages between these end-devices and a central network server. This paper provides an overview of LoRa and an in-depth analysis of its functional components. The physical and data link layer performance is evaluated by field tests and simulations. Based on the analysis and evaluations, some possible solutions for performance enhancements are proposed.

A Survey on 5G Networks for the Internet of Things: Communication Technologies and Challenges

Abstract: The Internet of Things (IoT) is a promising technology which tends to revolutionize and connect the global world via heterogeneous smart devices through seamless connectivity. The current demand for machine-type communications (MTC) has resulted in a variety of communication technologies with diverse service requirements to achieve the modern IoT vision. More recent cellular standards like long-term evolution (LTE) have been introduced for mobile devices but are not well suited for low-power and low data rate devices such as the IoT devices. To address this, there is a number of emerging IoT standards. Fifth generation (5G) mobile network, in particular, aims to address the limitations of previous cellular standards and be a potential key enabler for future IoT. In this paper, the state-of-the-art of the IoT application requirements along with their associated communication technologies are surveyed. In addition, the third generation partnership project cellular-based low-power wide area solutions to support and enable the new service requirements for Massive to Critical IoT use cases are discussed in detail, including extended coverage global system for mobile communications for the Internet of Things, enhanced machine-type communications, and narrowband-Internet of Things. Furthermore, 5G new radio enhancements for new service requirements and enabling technologies for the IoT are introduced. This paper presents a comprehensive review related to emerging and enabling technologies with main focus on 5G mobile networks that is envisaged to support the exponential traffic growth for enabling the IoT. The challenges and open research directions pertinent to the deployment of massive to critical IoT applications are also presented in coming up with an efficient context-aware congestion control mechanism.