scispace - formally typeset
Search or ask a question
Author

Alberto Pigazo

Bio: Alberto Pigazo is an academic researcher from University of Cantabria. The author has contributed to research in topics: Power factor & Phase-locked loop. The author has an hindex of 17, co-authored 54 publications receiving 1263 citations.


Papers
More filters
Proceedings ArticleDOI
01 Aug 2006
TL;DR: In this paper, an overview of the active methods used for islanding detection is presented, and the reported algorithms are carefully analyzed in their advantage and drawbacks and the considerations are validated by tests results obtained in accordance with the IEEE Std. 929-2000 procedure.
Abstract: For pt.I see ibid., p.420-5 (2006).This paper offers an overview of the active methods used for islanding detection. The inverter control algorithm is based on the use of harmonic compensators in order to create ideal working conditions (i.e. the PV-system produces a sinusoidal current and reject grid harmonics). This condition is the indispensable starting point to implement active islanding detection methods. In fact these methods are based on the perturbation of the ideal conditions (e.g. the injection of active/reactive power, the injection of current harmonics, or the insertion of an external capacitor). All the reported algorithms are carefully analysed in their advantage and drawbacks and the considerations are validated by tests results obtained in accordance with the IEEE Std. 929-2000 procedure

242 citations

Journal ArticleDOI
TL;DR: Simulation and experimental results show the performance of the proposed detection algorithm based on monitoring the DPGS output power considering the influence of the pulsewidth modulation, the output LCL filter, and the employed current controller in comparison with existing methods.
Abstract: Distributed power generation systems (DPGSs) based on inverters require reliable islanding detection algorithms (passive or active) in order to determine the electrical grid status and operate the grid-connected inverter properly. These methods are based on the analysis of the DPGS voltage, current, and power in time or frequency domain. This paper proposes a time-frequency detection algorithm based on monitoring the DPGS output power considering the influence of the pulsewidth modulation, the output LCL filter, and the employed current controller. Wavelet analysis is applied to obtain time localization of the islanding condition. Simulation and experimental results show the performance of the proposed detection algorithm in comparison with existing methods.

181 citations

Journal ArticleDOI
TL;DR: A new anti-islanding method is proposed that exploits the natural sensitivity of a grid-voltage sensorless control to disturbances to highlight the islanding condition.
Abstract: The detection of the islanding condition of a distributed generation (DG) system is crucial for safety reasons, as discussed in the IEEE standards and specifically required by some national codes. Several anti-islanding methods that are resident in the inverter have been investigated and classified as passive (measurement of the natural effects of islanding) or active (based on the measurement of the effects due to transients or harmonics deliberately introduced in the system). In case the power drained by the load matches the power generated by the DG inverter, the effect of islanding is small, and the passive methods fail. However, the active methods, which have been developed to overcome these limits, create disturbances that can interact with those generated by other DG systems. In this paper, a new anti-islanding method is proposed. It exploits the natural sensitivity of a grid-voltage sensorless control to disturbances to highlight the islanding condition. The adopted grid-voltage sensorless control is adapted to a single-phase system with the use of resonant controllers based on the internal model control law: resonant-controller-based observer results. Then, a Kalman-filter-based algorithm is used to detect the islanding condition based on the energy mismatch between the estimated third and fifth harmonics and the real ones. Experimental results support the analysis

130 citations

Journal ArticleDOI
TL;DR: In this paper, a rigorous analysis of the performance of these implementations has been carried out and complete tests have been performed to evaluate the computational burden, the frequency domain response, and the tolerance to low frequency amplitude variations.
Abstract: The monitoring and rejection of voltage and current harmonics in power electronics applications such as power quality conditioners or distributed generation systems require correct estimation algorithms especially if the harmonic amplitudes are time varying. Power signal decomposition in multiple synchronous rotating reference frames (MSRFs) is considered one of the best solutions. The most commonly employed implementations of this signal transformation are based on phase-locked loops (PLLs), recursive discrete Fourier transforms (RDFT), or discrete Kalman filtering (DKF). In this paper, a rigorous analysis of the performance of these implementations has been carried out. Complete tests have been performed to evaluate the computational burden, the frequency domain response, and the tolerance to low frequency amplitude variations. The results make it possible to select the proper method depending on the requirements of each application.

116 citations

Journal ArticleDOI
TL;DR: This paper is a first attempt to carry out a systematic study of the performances of the most common active detection methods in a case of two inverters connected to the same EPS to evaluate the global capability of the two systems to detect islanding condition.
Abstract: Grid-connected photovoltaic (PV) inverters employ an islanding-detection functionality in order to determine the status of the electrical grid. In fact, the inverter must be stopped once the islanding operating mode is detected according to standards and grid-code limits. Diverse islanding-detection algorithms have been proposed in literature to cope with this safety requirement. Among them, active methods based on the deliberate perturbation of the inverter behavior can minimize the so-called nondetection zone, which is a range of conditions in which the inverter does not recognize that it is operating in an undesired island. In most cases, the performances of these methods have been analyzed considering a highly dispersed generation scheme, where only one distributed-generation power system is connected to the local electrical power system (EPS). However, in some studies, it has been highlighted that if two or more PV inverters are connected to the same local EPS, their anti-islanding algorithms do not behave ideally and can fail in detecting the islanding condition. However, there is no systematic study that has investigated the overall capability of different anti-islanding methods employed on several inverters connected to the same EPS to detect islanding condition. This paper is a first attempt to carry out a systematic study of the performances of the most common active detection methods in a case of two inverters connected to the same EPS. In order to evaluate the global capability of the two systems to detect islanding condition, a new performance index is introduced and applied also to the case when the two inverters employ different anti-islanding algorithms.

95 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this paper, a detailed analysis of the main operation modes and control structures for power converters belonging to micro-grids is carried out, focusing mainly on grid-forming, grid-feeding, and grid-supporting configurations.
Abstract: The enabling of ac microgrids in distribution networks allows delivering distributed power and providing grid support services during regular operation of the grid, as well as powering isolated islands in case of faults and contingencies, thus increasing the performance and reliability of the electrical system. The high penetration of distributed generators, linked to the grid through highly controllable power processors based on power electronics, together with the incorporation of electrical energy storage systems, communication technologies, and controllable loads, opens new horizons to the effective expansion of microgrid applications integrated into electrical power systems. This paper carries out an overview about microgrid structures and control techniques at different hierarchical levels. At the power converter level, a detailed analysis of the main operation modes and control structures for power converters belonging to microgrids is carried out, focusing mainly on grid-forming, grid-feeding, and grid-supporting configurations. This analysis is extended as well toward the hierarchical control scheme of microgrids, which, based on the primary, secondary, and tertiary control layer division, is devoted to minimize the operation cost, coordinating support services, meanwhile maximizing the reliability and the controllability of microgrids. Finally, the main grid services that microgrids can offer to the main network, as well as the future trends in the development of their operation and control for the next future, are presented and discussed.

2,621 citations

01 Sep 2010

2,148 citations

Journal ArticleDOI
TL;DR: A new multiresonant frequency-adaptive synchronization method for grid-connected power converters that allows estimating not only the positive- and negative-sequence components of the power signal at the fundamental frequency but also other sequence components at other harmonic frequencies is presented.
Abstract: This paper presents a new multiresonant frequency-adaptive synchronization method for grid-connected power converters that allows estimating not only the positive- and negative-sequence components of the power signal at the fundamental frequency but also other sequence components at other harmonic frequencies. The proposed system is called MSOGI-FLL since it is based on both a harmonic decoupling network consisting of multiple second-order generalized integrators (MSOGIs) and a frequency-locked loop (FLL), which makes the system frequency adaptive. In this paper, the MSOGI-FLL is analyzed for single- and three-phase applications, deducing some key expressions regarding its stability and tuning. Moreover, the performance of the MSOGI-FLL is evaluated by both simulations and experiments to show its capability for detecting different harmonic components in a highly polluted grid scenario.

950 citations

Journal ArticleDOI
TL;DR: An improved analytical (IA) method based on IA expressions to calculate the optimal size of four different DG types and a methodology to identify the best location for DG allocation is proposed, and a technique to get the optimal power factor is presented for DG capable of delivering real and reactive power.
Abstract: This paper investigates the problem of multiple distributed generator (DG units) placement to achieve a high loss reduction in large-scale primary distribution networks. An improved analytical (IA) method is proposed in this paper. This method is based on IA expressions to calculate the optimal size of four different DG types and a methodology to identify the best location for DG allocation. A technique to get the optimal power factor is presented for DG capable of delivering real and reactive power. Moreover, loss sensitivity factor (LSF) and exhaustive load flow (ELF) methods are also introduced. IA method was tested and validated on three distribution test systems with varying sizes and complexity. Results show that IA method is effective as compared with LSF and ELF solutions. Some interesting results are also discussed in this paper.

689 citations

Journal ArticleDOI
TL;DR: A new grid synchronization method for three-phase three-wire networks, namely dual second-order generalized integrator (SOGI) frequency-locked loop, based on two adaptive filters, is presented, able to perform an excellent estimation of the instantaneous symmetrical components of the grid voltage under unbalanced and distorted grid conditions.
Abstract: Grid synchronization algorithms are of great importance in the control of grid-connected power converters, as fast and accurate detection of the grid voltage parameters is crucial in order to implement stable control strategies under generic grid conditions. This paper presents a new grid synchronization method for three-phase three-wire networks, namely dual second-order generalized integrator (SOGI) frequency-locked loop. The method is based on two adaptive filters, implemented by using a SOGI on the stationary αβ reference frame, and it is able to perform an excellent estimation of the instantaneous symmetrical components of the grid voltage under unbalanced and distorted grid conditions. This paper analyzes the performance of the proposed synchronization method including different design issues. Moreover, the behavior of the method for synchronizing with highly unbalanced grid is proven by means of simulation and experimental results, demonstrating its excellent performance.

620 citations