Alejandro Suarez

Bio: Alejandro Suarez is an academic researcher from University of Seville. The author has contributed to research in topics: Multirotor & Robot end effector. The author has an hindex of 12, co-authored 36 publications receiving 463 citations. Previous affiliations of Alejandro Suarez include Spanish National Research Council.

Past, Present, and Future of Aerial Robotic Manipulators

Abstract: This article analyzes the evolution and current trends in aerial robotic manipulation, comprising helicopters, conventional underactuated multirotors, and multidirectional thrust platforms equipped with a wide variety of robotic manipulators capable of physically interacting with the environment. It also covers cooperative aerial manipulation and interconnected actuated multibody designs. The review is completed with developments in teleoperation, perception, and planning. Finally, a new generation of aerial robotic manipulators is presented with our vision of the future.

Physical-Virtual Impedance Control in Ultralightweight and Compliant Dual-Arm Aerial Manipulators

Abstract: Dual-arm aerial manipulation requires the design and development of high performance robotic arms in terms of safety, robustness, and force/torque/impedance control, taking into account the integration in the aerial platform, the strong weight constraints, and the technological limitations of the servo actuators. A compliant joint arm also improves the response of the aerial manipulator to collisions and external forces during the flight operation. This letter evaluates the control capabilities in a lightweight manipulator built with smart servo actuators and a spring-lever transmission mechanism that provides joint compliance and deflection measurement. The dynamic model of a compliant joint is validated through frequency identification, demonstrating how virtual variable impedance can be achieved without a second motor. Mechanical joint compliance is the base of the Cartesian impedance control scheme of the dual-arm system, integrated with the controller of the aerial platform. A stereo vision system provides the Cartesian deflection of the end effector, derived from the definition of an equivalent stiff joint manipulator, allowing the estimation and control of the contact forces. Experimental results validate the developed concepts.

Lightweight compliant arm for aerial manipulation

Abstract: This paper presents the design and experimental validation of a low weight compliant arm for aerial manipulation, which uses a linear actuator to move the elbow joint. The proposed arm design allows for estimating payload mass, as well as detecting collisions against obstacles in the forearm. The compliant arm design is intended to be applied in aerial manipulation and transportation, being mounted on the base of an Unmanned Aerial Vehicle (UAV) like a multirotor or a small autonomous helicopter. The payload mass estimation can be useful in the adaptation and stabilization of UAV altitude and attitude controllers when objects of unknown weight are grasped by the arm, while compliance reduces the effect of physical interaction when lifting an object on UAV stability. The paper addresses the mechanical design and construction of a three DoF arm prototype (elbow, wrist roll and pitch), deriving the equations for estimating the payload mass. A set of experiments for payload mass estimation and collision detection and reaction have been performed to test the validity of the approach.

Lightweight compliant arm with compliant finger for aerial manipulation and inspection

Abstract: This paper presents the design and experimental validation of a compliant and lightweight 3-DOF robotic arm - shoulder yaw, shoulder pitch and elbow pitch joints - equipped with a compliant finger module intended for aerial inspection and manipulation in contact with the environment. A simple transmission mechanism consisting in a pair of compression springs and a flange bearing is integrated in the shoulder pitch and elbow pitch joints between the servo shaft and the output frame. Joint deflection measurement with potentiometer allows joint torque but also contact force estimation and control. The low stiffness of the compliant finger has been exploited for soft collision detection and obstacle localization, in such a way that the contact forces do not significantly disturb the UAV. Fixed-base experiments have been performed with the arm, including the characterization of the compliant joints and the control of the contact force at wrist point.

Aerial Manipulation: A Literature Review

Abstract: Aerial manipulation aims at combining the versatility and the agility of some aerial platforms with the manipulation capabilities of robotic arms. This letter tries to collect the results reached by the research community so far within the field of aerial manipulation, especially from the technological and control point of view. A brief literature review of general aerial robotics and space manipulation is carried out as well.

Unmanned Aerial Vehicles in Agriculture: A Review of Perspective of Platform, Control, and Applications

Abstract: For agricultural applications, regularized smart-farming solutions are being considered, including the use of unmanned aerial vehicles (UAVs). The UAVs combine information and communication technologies, robots, artificial intelligence, big data, and the Internet of Things. The agricultural UAVs are highly capable, and their use has expanded across all areas of agriculture, including pesticide and fertilizer spraying, seed sowing, and growth assessment and mapping. Accordingly, the market for agricultural UAVs is expected to continue growing with the related technologies. In this study, we consider the latest trends and applications of leading technologies related to agricultural UAVs, control technologies, equipment, and development. We discuss the use of UAVs in real agricultural environments. Furthermore, the future development of the agricultural UAVs and their challenges are presented.

A Unified Passivity Based Control Framework for Position, Torque and Impedance Control of Flexible Joint Robots.

Abstract: This paper describes a general passivity-based framework for the control of flexible joint robots. Recent results on torque, position, as well as impedance control of flexible joint robots are summarized, and the relations between the individual contributions are highlighted. It is shown that an inner torque feedback loop can be incorporated into a passivity-based analysis by interpreting torque feedback in terms of shaping of the motor inertia. This result, which implicitly was already included in earlier work on torque and position control, can also be used for the design of impedance controllers. For impedance control, furthermore, potential energy shaping is of special interest. It is shown how, based only on the motor angles, a potential function can be designed which simultaneously incorporates gravity compensation and a desired Cartesian stiffness relation for the link angles. All the presented controllers were experimentally evaluated on DLR lightweight robots and their performance and robustness shown with respect to uncertain model parameters. Experimental results with position controllers as well as an impact experiment are presented briefly, and an overview of several applications is given in which the controllers have been applied.

The AEROARMS Project: Aerial Robots with Advanced Manipulation Capabilities for Inspection and Maintenance

Abstract: This article summarizes new aerial robotic manipulation technologies and methods-aerial robotic manipulators with dual arms and multidirectional thrusters-developed in the AEROARMS project for outdoor industrial inspection and maintenance (IaM).