scispace - formally typeset
Search or ask a question
Author

Alex K.-Y. Jen

Bio: Alex K.-Y. Jen is an academic researcher from City University of Hong Kong. The author has contributed to research in topics: Perovskite (structure) & Polymer solar cell. The author has an hindex of 128, co-authored 921 publications receiving 61811 citations. Previous affiliations of Alex K.-Y. Jen include University of Nebraska–Lincoln & Zhejiang California International NanoSystems Institute.


Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, the additive can participate in the perovskite formation via dissociated halides, suggesting that molecular structure of alkyl halide additives plays multiple roles in modulating the dynamics of perovskiy crystal growth.
Abstract: Alkyl halide additives have been investigated to elucidate their effects in enhancing perovskite solar cell performance. We found that the additives can participate in the perovskite formation via dissociated halides, suggesting that molecular structure of alkyl halide additives plays multiple roles in modulating the dynamics of perovskite crystal growth.

147 citations

Journal ArticleDOI
TL;DR: A new chemical approach using environmentally friendly strontium chloride (SrCl2 ) as a precursor for perovskite preparation is demonstrated to result in enhanced device performance and stability of the derived hole-conductor-free printable mesoscopic PVSCs.
Abstract: Despite the breakthrough of over 22% power conversion efficiency demonstrated in organic-inorganic hybrid perovskite solar cells (PVSCs), critical concerns pertaining to the instability and toxicity still remain that may potentially hinder their commercialization. In this study, a new chemical approach using environmentally friendly strontium chloride (SrCl2 ) as a precursor for perovskite preparation is demonstrated to result in enhanced device performance and stability of the derived hole-conductor-free printable mesoscopic PVSCs. The CH3 NH3 PbI3 perovskite is chemically modified by introducing SrCl2 in the precursor solution. The results from structural, elemental, and morphological analyses show that the incorporation of SrCl2 affords the formation of CH3 NH3 PbI3 (SrCl2 )x perovskites endowed with lower defect concentration and better pore filling in the derived mesoscopic PVSCs. The optimized compositional CH3 NH3 PbI3 (SrCl2 )0.1 perovskite can substantially enhance the photovoltaic performance of the derived hole-conductor-free device to 15.9%, outperforming the value (13.0%) of the pristine CH3 NH3 PbI3 device. More importantly, the stability of the device in ambient air under illumination is also improved.

145 citations

Journal ArticleDOI
TL;DR: In this paper, a ladder-type indacenodithiophene-based polymer (PIDT-DFBT) was investigated in order to reduce band gap, improve charge mobilities and enhance the photovoltaic performance of the material.
Abstract: Selenium substitution on a ladder-type indacenodithiophene-based polymer (PIDT-DFBT) is investigated in order to reduce band gap, improve charge mobilities, and enhance the photovoltaic performance of the material. The new indacenodiselenophene-based polymer (PIDSe-DFBT) possessed improved absorption over its sulfur analogue in films, as well as substantially higher charge mobilities (0.15 and 0.064 cm2/(V s) hole and electron mobility, respectively, compared to 0.002 and 0.008 cm2/(V s) for PIDT-DFBT). The enhanced material properties led to an improved power conversion efficiency of 6.8% in photovoltaic cells, a 13% improvement over PIDT-DFBT-based devices. Furthermore, we examined the effect of molecular weight on the properties of PIDSe-DFBT and found not only a strong molecular weight dependence on mobilities, but also on the absorptivity of polymer films, with each 15 000 g/mol increase in weight, leading to a 25% increase in the absorptivity of the material. The molecular weight dependence of the m...

144 citations

Journal ArticleDOI
TL;DR: In this article, the complete replacement of benzene rings with thiophene rings in a donor-acceptor substituted stilbene significantly enhances its second-order nonlinear optical hyperpolarizability.
Abstract: It is shown experimentally that the complete replacement of benzene rings with thiophene rings in a donor–acceptor substituted stilbene significantly enhances its second-order nonlinear optical hyperpolarizability (β); results obtained with a series of thiophene-substituted donor–acceptor compounds with different conjugation lengths reveal a power law dependence of βµ on the molecular conjugation length.

143 citations

Journal ArticleDOI
TL;DR: These results provide new insight into the ordering behavior of EO dendrimers and demonstrate that the frequently observed asymptotic dependence of electro-optic activity on chromophore number density may be overcome through rational design.
Abstract: Extensive experimental and theoretical study suggests that interchromophore electrostatic interactions are among the most severe impediments to the induction and stability of large electro-optic coefficients in electric-field-poled organic materials. In this report, multichromophore-containing dendritic materials have been investigated as a means to minimize unwanted attenuation of nonlinear optical (electro-optic) activity at high chromophore loading. The dendritic molecular architectures employed were designed to provide optimized molecular scaffolding for electric-field-induced molecular reorientation. Design parameters were based upon past experimental results in conjunction with statistical and quantum mechanical modeling. The electro-optic behavior of these materials was evaluated through experimental and theoretical analysis. Experimental data collected from the dendrimer structures depict a reasonably linear relationship between chromophore number density (N) and electro-optic activity (r33) demon...

142 citations


Cited by
More filters
Journal ArticleDOI
18 Oct 2013-Science
TL;DR: In this article, transient absorption and photoluminescence-quenching measurements were performed to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide and triiodide perovskite absorbers.
Abstract: Organic-inorganic perovskites have shown promise as high-performance absorbers in solar cells, first as a coating on a mesoporous metal oxide scaffold and more recently as a solid layer in planar heterojunction architectures. Here, we report transient absorption and photoluminescence-quenching measurements to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide (CH3NH3PbI(3-x)Cl(x)) and triiodide (CH3NH3PbI3) perovskite absorbers. We found that the diffusion lengths are greater than 1 micrometer in the mixed halide perovskite, which is an order of magnitude greater than the absorption depth. In contrast, the triiodide absorber has electron-hole diffusion lengths of ~100 nanometers. These results justify the high efficiency of planar heterojunction perovskite solar cells and identify a critical parameter to optimize for future perovskite absorber development.

8,199 citations

Journal Article
TL;DR: In this paper, transient absorption and photoluminescence-quenching measurements were performed to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide and triiodide perovskite absorbers.
Abstract: Organic-inorganic perovskites have shown promise as high-performance absorbers in solar cells, first as a coating on a mesoporous metal oxide scaffold and more recently as a solid layer in planar heterojunction architectures. Here, we report transient absorption and photoluminescence-quenching measurements to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide (CH3NH3PbI(3-x)Cl(x)) and triiodide (CH3NH3PbI3) perovskite absorbers. We found that the diffusion lengths are greater than 1 micrometer in the mixed halide perovskite, which is an order of magnitude greater than the absorption depth. In contrast, the triiodide absorber has electron-hole diffusion lengths of ~100 nanometers. These results justify the high efficiency of planar heterojunction perovskite solar cells and identify a critical parameter to optimize for future perovskite absorber development.

6,454 citations

Journal ArticleDOI
01 Aug 2014-Science
TL;DR: Perovskite films received a boost in photovoltaic efficiency through controlled formation of charge-generating films and improved current transfer to the electrodes and low-temperature processing steps allowed the use of materials that draw current out of the perovskites layer more efficiently.
Abstract: Advancing perovskite solar cell technologies toward their theoretical power conversion efficiency (PCE) requires delicate control over the carrier dynamics throughout the entire device. By controlling the formation of the perovskite layer and careful choices of other materials, we suppressed carrier recombination in the absorber, facilitated carrier injection into the carrier transport layers, and maintained good carrier extraction at the electrodes. When measured via reverse bias scan, cell PCE is typically boosted to 16.6% on average, with the highest efficiency of ~19.3% in a planar geometry without antireflective coating. The fabrication of our perovskite solar cells was conducted in air and from solution at low temperatures, which should simplify manufacturing of large-area perovskite devices that are inexpensive and perform at high levels.

5,789 citations

Journal ArticleDOI
TL;DR: This paper presents a meta-analysis of the chiral stationary phase transition of Na6(CO3)(SO4)2, a major component of the response of the immune system to Na2CO3.
Abstract: Ju Mei,†,‡,∥ Nelson L. C. Leung,†,‡,∥ Ryan T. K. Kwok,†,‡ Jacky W. Y. Lam,†,‡ and Ben Zhong Tang*,†,‡,§ †HKUST-Shenzhen Research Institute, Hi-Tech Park, Nanshan, Shenzhen 518057, China ‡Department of Chemistry, HKUST Jockey Club Institute for Advanced Study, Institute of Molecular Functional Materials, Division of Biomedical Engineering, State Key Laboratory of Molecular Neuroscience, Division of Life Science, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China Guangdong Innovative Research Team, SCUT-HKUST Joint Research Laboratory, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China

5,658 citations

Journal ArticleDOI
12 Jun 2015-Science
TL;DR: An approach for depositing high-quality FAPbI3 films, involving FAP bI3 crystallization by the direct intramolecular exchange of dimethylsulfoxide (DMSO) molecules intercalated in PbI2 with formamidinium iodide is reported.
Abstract: The band gap of formamidinium lead iodide (FAPbI3) perovskites allows broader absorption of the solar spectrum relative to conventional methylammonium lead iodide (MAPbI3). Because the optoelectronic properties of perovskite films are closely related to film quality, deposition of dense and uniform films is crucial for fabricating high-performance perovskite solar cells (PSCs). We report an approach for depositing high-quality FAPbI3 films, involving FAPbI3 crystallization by the direct intramolecular exchange of dimethylsulfoxide (DMSO) molecules intercalated in PbI2 with formamidinium iodide. This process produces FAPbI3 films with (111)-preferred crystallographic orientation, large-grained dense microstructures, and flat surfaces without residual PbI2. Using films prepared by this technique, we fabricated FAPbI3-based PSCs with maximum power conversion efficiency greater than 20%.

5,458 citations