scispace - formally typeset
Search or ask a question
Author

Alex K.-Y. Jen

Bio: Alex K.-Y. Jen is an academic researcher from City University of Hong Kong. The author has contributed to research in topics: Perovskite (structure) & Polymer solar cell. The author has an hindex of 128, co-authored 921 publications receiving 61811 citations. Previous affiliations of Alex K.-Y. Jen include University of Nebraska–Lincoln & Zhejiang California International NanoSystems Institute.


Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the development of functional fullerenes as acceptors, electron selective layers, and morphology stabilizers for bulk heterojunction polymer solar cells is reviewed, and a wide variety of newly developed fullerene-derived molecules have appeared in the past few years and started to show very encouraging photovoltaic performance when they were blended with low bandgap conjugated polymers.
Abstract: Tremendous progress has been made on the design and processing of new active and interfacial materials to enable organic photovoltaics to achieve high power conversion efficiencies of >10%. In this Feature Article the development of functional fullerenes as (1) acceptors, (2) electron selective layers, and (3) morphology stabilizers for bulk heterojunction polymer solar cells is reviewed. In addition to the standard PCBM based acceptors, a wide variety of newly developed fullerene-derived molecules have appeared in the past few years and started to show very encouraging photovoltaic performance when they were blended with low bandgap conjugated polymers. New fullerene derivatives with proper molecular design can also serve as electron selective interfacial materials and morphology stabilizers for the bulk heterojunction layer, which are essential to improve the interfacial property and long term stability of polymer solar cells. Although there still are many challenges ahead before practical polymer solar cells will arrive in the market place, the research in functional fullerenes deserves to have more attention in order to expedite this development process.

450 citations

Journal ArticleDOI
26 Jan 2016-ACS Nano
TL;DR: The flawless and surface-nanostructured NiOx film can make the interfacial recombination and monomolecular Shockley-Read-Hall recombination of PVSC reduce and improve the hole extraction and thus PVSC performances, which contributes to the evolution of flexible PVSCs with simple fabrication process and high device performances.
Abstract: Recently, researchers have focused on the design of highly efficient flexible perovskite solar cells (PVSCs), which enables the implementation of portable and roll-to-roll fabrication in large scale. While NiOx is a promising material for hole transport layer (HTL) candidate for fabricating efficient PVSCs on a rigid substrate, the reported NiOx HTLs are formed using different multistep treatments (such as 300–500 °C annealing, O2-plasma, UVO, etc.), which hinders the development of flexible PVSCs based on NiOx. Meanwhile, the features of nanostructured morphology and flawless film quality are very important for the film to function as highly effective HTL of PVSCs. However, it is difficult to have the two features coexist natively, particularly in a solution process that flawless film will usually come with smooth morphology. Here, we demonstrate the flawless and surface-nanostructured NiOx film from a simple and controllable room-temperature solution process for achieving high performance flexible PVSCs...

446 citations

Journal ArticleDOI
TL;DR: A new structural design of hole-transporting material, Trux-OMeTAD, which consists of a C3h Truxene-core with arylamine terminals and hexyl side-chains that exhibits excellent hole mobility and desired surface energy to the perovskite uplayer.
Abstract: Herein we present a new structural design of hole-transporting material, Trux-OMeTAD, which consists of a C3h Truxene-core with arylamine terminals and hexyl side-chains. This planar, rigid, and fully conjugated molecule exhibits excellent hole mobility and desired surface energy to the perovskite uplayer. Perovskite solar cells fabricated using the p-i-n architecture with Trux-OMeTAD as the p-layer, show a high PCE of 18.6% with minimal hysteresis.

426 citations

Journal ArticleDOI
TL;DR: Highly crystalline SnO2 is demonstrated to serve as a stable and robust electron-transporting layer for high-performance perovskite solar cells and provides a promising power conversion efficiency (PCE).
Abstract: Highly crystalline SnO2 is demonstrated to serve as a stable and robust electron-transporting layer for high-performance perovskite solar cells. Benefiting from its high crystallinity, the relatively thick SnO2 electron-transporting layer (≈120 nm) provides a respectable electron-transporting property to yield a promising power conversion efficiency (PCE)(18.8%) Over 90% of the initial PCE can be retained after 30 d storage in ambient with ≈70% relative humidity.

420 citations


Cited by
More filters
Journal ArticleDOI
18 Oct 2013-Science
TL;DR: In this article, transient absorption and photoluminescence-quenching measurements were performed to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide and triiodide perovskite absorbers.
Abstract: Organic-inorganic perovskites have shown promise as high-performance absorbers in solar cells, first as a coating on a mesoporous metal oxide scaffold and more recently as a solid layer in planar heterojunction architectures. Here, we report transient absorption and photoluminescence-quenching measurements to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide (CH3NH3PbI(3-x)Cl(x)) and triiodide (CH3NH3PbI3) perovskite absorbers. We found that the diffusion lengths are greater than 1 micrometer in the mixed halide perovskite, which is an order of magnitude greater than the absorption depth. In contrast, the triiodide absorber has electron-hole diffusion lengths of ~100 nanometers. These results justify the high efficiency of planar heterojunction perovskite solar cells and identify a critical parameter to optimize for future perovskite absorber development.

8,199 citations

Journal Article
TL;DR: In this paper, transient absorption and photoluminescence-quenching measurements were performed to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide and triiodide perovskite absorbers.
Abstract: Organic-inorganic perovskites have shown promise as high-performance absorbers in solar cells, first as a coating on a mesoporous metal oxide scaffold and more recently as a solid layer in planar heterojunction architectures. Here, we report transient absorption and photoluminescence-quenching measurements to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide (CH3NH3PbI(3-x)Cl(x)) and triiodide (CH3NH3PbI3) perovskite absorbers. We found that the diffusion lengths are greater than 1 micrometer in the mixed halide perovskite, which is an order of magnitude greater than the absorption depth. In contrast, the triiodide absorber has electron-hole diffusion lengths of ~100 nanometers. These results justify the high efficiency of planar heterojunction perovskite solar cells and identify a critical parameter to optimize for future perovskite absorber development.

6,454 citations

Journal ArticleDOI
01 Aug 2014-Science
TL;DR: Perovskite films received a boost in photovoltaic efficiency through controlled formation of charge-generating films and improved current transfer to the electrodes and low-temperature processing steps allowed the use of materials that draw current out of the perovskites layer more efficiently.
Abstract: Advancing perovskite solar cell technologies toward their theoretical power conversion efficiency (PCE) requires delicate control over the carrier dynamics throughout the entire device. By controlling the formation of the perovskite layer and careful choices of other materials, we suppressed carrier recombination in the absorber, facilitated carrier injection into the carrier transport layers, and maintained good carrier extraction at the electrodes. When measured via reverse bias scan, cell PCE is typically boosted to 16.6% on average, with the highest efficiency of ~19.3% in a planar geometry without antireflective coating. The fabrication of our perovskite solar cells was conducted in air and from solution at low temperatures, which should simplify manufacturing of large-area perovskite devices that are inexpensive and perform at high levels.

5,789 citations

Journal ArticleDOI
TL;DR: This paper presents a meta-analysis of the chiral stationary phase transition of Na6(CO3)(SO4)2, a major component of the response of the immune system to Na2CO3.
Abstract: Ju Mei,†,‡,∥ Nelson L. C. Leung,†,‡,∥ Ryan T. K. Kwok,†,‡ Jacky W. Y. Lam,†,‡ and Ben Zhong Tang*,†,‡,§ †HKUST-Shenzhen Research Institute, Hi-Tech Park, Nanshan, Shenzhen 518057, China ‡Department of Chemistry, HKUST Jockey Club Institute for Advanced Study, Institute of Molecular Functional Materials, Division of Biomedical Engineering, State Key Laboratory of Molecular Neuroscience, Division of Life Science, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China Guangdong Innovative Research Team, SCUT-HKUST Joint Research Laboratory, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China

5,658 citations

Journal ArticleDOI
12 Jun 2015-Science
TL;DR: An approach for depositing high-quality FAPbI3 films, involving FAP bI3 crystallization by the direct intramolecular exchange of dimethylsulfoxide (DMSO) molecules intercalated in PbI2 with formamidinium iodide is reported.
Abstract: The band gap of formamidinium lead iodide (FAPbI3) perovskites allows broader absorption of the solar spectrum relative to conventional methylammonium lead iodide (MAPbI3). Because the optoelectronic properties of perovskite films are closely related to film quality, deposition of dense and uniform films is crucial for fabricating high-performance perovskite solar cells (PSCs). We report an approach for depositing high-quality FAPbI3 films, involving FAPbI3 crystallization by the direct intramolecular exchange of dimethylsulfoxide (DMSO) molecules intercalated in PbI2 with formamidinium iodide. This process produces FAPbI3 films with (111)-preferred crystallographic orientation, large-grained dense microstructures, and flat surfaces without residual PbI2. Using films prepared by this technique, we fabricated FAPbI3-based PSCs with maximum power conversion efficiency greater than 20%.

5,458 citations