Alex K.-Y. Jen

Bio: Alex K.-Y. Jen is an academic researcher from City University of Hong Kong. The author has contributed to research in topics: Perovskite (structure) & Polymer solar cell. The author has an hindex of 128, co-authored 921 publications receiving 61811 citations. Previous affiliations of Alex K.-Y. Jen include University of Nebraska–Lincoln & Zhejiang California International NanoSystems Institute.

Bright red-emitting electrophosphorescent device using osmium complex as a triplet emitter

Abstract: A series of efficient and bright double-layer light-emitting devices have been fabricated using the osmium (Os) complex as the triplet emissive dopant in both a blue-emitting polyfluorene derivative (PF–TPA–OXD) containing hole-transporting triphenylamine (TPA) and electron-transporting oxadiazole (OXD) as side chains and a blend of 2-(4-t-butylphenyl)-5(4-biphenylyl)-1,3,4-oxadizole (PBD) in poly(N-vinylcarbazole) (PVK). Due to a balanced charge injection and transport in PF–TPA–OXD and very efficient energy transfer from this polymer to the Os complex, the resulting device (indium tin oxide/HTL/OsCF3:PF–TPA–OXD/Ca/Ag) reaches a maximum external quantum efficiency of 2.1% with a peak brightness of 2920 cd/m2. These results are significantly higher than those obtained from the commonly used host, PVK:PBD (0.49% and 1270 cd/m2).

High color purity ZnSe/ZnS core/shell quantum dot based blue light emitting diodes with an inverted device structure

Abstract: Deep-blue, high color purity electroluminescence (EL) is demonstrated in an inverted light-emitting device using nontoxic ZnSe/ZnS core/shell quantum dots (QDs) as the emitter. The device exhibits moderate turn-on voltage (4.0 V) and color-saturated deep blue emission with a narrow full width at half maximum of ∼15 nm and emission peak at 441 nm. Their maximum luminance and current efficiency reach 1170 cd/m2 and 0.51 cd/A, respectively. The high performances are achieved through a ZnO nanoparticle based electron-transporting layer due to efficient electron injection into the ZnSe/ZnS QDs. Energy transfer processes between the ZnSe/ZnS QDs and hole-transporting materials are studied by time-resolved photoluminescence spectroscopy to understand the EL mechanism of the devices. These results provide a new guide for the fabrication of efficient deep-blue quantum dot light-emitting diodes and the realization of QD-based lighting sources and full-color panel displays.

Tackling Energy Loss for High-Efficiency Organic Solar Cells with Integrated Multiple Strategies.

Abstract: Limited by the various inherent energy losses from multiple channels, organic solar cells show inferior device performance compared to traditional inorganic photovoltaic techniques, such as silicon and CuInGaSe. To alleviate these fundamental limitations, an integrated multiple strategy is implemented including molecular design, interfacial engineering, optical manipulation, and tandem device construction into one cell. Considering the close correlation among these loss channels, a sophisticated quantification of energy-loss reduction is tracked along with each strategy in a perspective to reach rational overall optimum. A novel nonfullerene acceptor, 6TBA, is synthesized to resolve the thermalization and VOC loss, and another small bandgap nonfullerene acceptor, 4TIC, is used in the back sub-cell to alleviate transmission loss. Tandem architecture design significantly reduces the light absorption loss, and compensates carrier dynamics and thermalization loss. Interfacial engineering further reduces energy loss from carrier dynamics in the tandem architecture. As a result of this concerted effort, a very high power conversion efficiency (13.20%) is obtained. A detailed quantitative analysis on the energy losses confirms that the improved device performance stems from these multiple strategies. The results provide a rational way to explore the ultimate device performance through molecular design and device engineering.

Terthieno[3,2-b ]Thiophene (6T) Based Low Bandgap Fused-Ring Electron Acceptor for Highly Efficient Solar Cells with a High Short-Circuit Current Density and Low Open-Circuit Voltage Loss

Abstract: A terthieno[3,2-b]thiophene (6T) based fused-ring low bandgap electron acceptor, 6TIC, is designed and synthesized for highly efficient nonfullerene solar cells The chemical, optical, and physical properties, device characteristics, and film morphology of 6TIC are intensively studied 6TIC shows a narrow bandgap with band edge reaching 905 nm due to the electron-rich π-conjugated 6T core and reduced resonance stabilization energy The rigid, π-conjugated 6T also offers lower reorganization energy to facilitate very low VOC loss in the 6TIC system The analysis of film morphology shows that PTB7-Th and 6TIC can form crystalline domains and a bicontinuous network These domains are enlarged when thermal annealing is applied Consequently, the device based on PTB7-Th:6TIC exhibits a high power conversion efficiency (PCE) of 1107% with a high JSC > 20 mA cm−2 and a high VOC of 083 V with a relatively low VOC loss (≈055 V) Moreover, a semitransparent solar cell based on PTB7-Th:6TIC exhibits a relatively high PCE (762%) The device can have combined high PCE and high JSC is quite rare for organic solar cells

Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber.

Abstract: Organic-inorganic perovskites have shown promise as high-performance absorbers in solar cells, first as a coating on a mesoporous metal oxide scaffold and more recently as a solid layer in planar heterojunction architectures. Here, we report transient absorption and photoluminescence-quenching measurements to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide (CH3NH3PbI(3-x)Cl(x)) and triiodide (CH3NH3PbI3) perovskite absorbers. We found that the diffusion lengths are greater than 1 micrometer in the mixed halide perovskite, which is an order of magnitude greater than the absorption depth. In contrast, the triiodide absorber has electron-hole diffusion lengths of ~100 nanometers. These results justify the high efficiency of planar heterojunction perovskite solar cells and identify a critical parameter to optimize for future perovskite absorber development.

Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber

Abstract: Organic-inorganic perovskites have shown promise as high-performance absorbers in solar cells, first as a coating on a mesoporous metal oxide scaffold and more recently as a solid layer in planar heterojunction architectures. Here, we report transient absorption and photoluminescence-quenching measurements to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide (CH3NH3PbI(3-x)Cl(x)) and triiodide (CH3NH3PbI3) perovskite absorbers. We found that the diffusion lengths are greater than 1 micrometer in the mixed halide perovskite, which is an order of magnitude greater than the absorption depth. In contrast, the triiodide absorber has electron-hole diffusion lengths of ~100 nanometers. These results justify the high efficiency of planar heterojunction perovskite solar cells and identify a critical parameter to optimize for future perovskite absorber development.

Interface engineering of highly efficient perovskite solar cells

Abstract: Advancing perovskite solar cell technologies toward their theoretical power conversion efficiency (PCE) requires delicate control over the carrier dynamics throughout the entire device. By controlling the formation of the perovskite layer and careful choices of other materials, we suppressed carrier recombination in the absorber, facilitated carrier injection into the carrier transport layers, and maintained good carrier extraction at the electrodes. When measured via reverse bias scan, cell PCE is typically boosted to 16.6% on average, with the highest efficiency of ~19.3% in a planar geometry without antireflective coating. The fabrication of our perovskite solar cells was conducted in air and from solution at low temperatures, which should simplify manufacturing of large-area perovskite devices that are inexpensive and perform at high levels.

Aggregation-Induced Emission: Together We Shine, United We Soar!

Abstract: Ju Mei,†,‡,∥ Nelson L. C. Leung,†,‡,∥ Ryan T. K. Kwok,†,‡ Jacky W. Y. Lam,†,‡ and Ben Zhong Tang*,†,‡,§ †HKUST-Shenzhen Research Institute, Hi-Tech Park, Nanshan, Shenzhen 518057, China ‡Department of Chemistry, HKUST Jockey Club Institute for Advanced Study, Institute of Molecular Functional Materials, Division of Biomedical Engineering, State Key Laboratory of Molecular Neuroscience, Division of Life Science, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China Guangdong Innovative Research Team, SCUT-HKUST Joint Research Laboratory, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Abstract: The band gap of formamidinium lead iodide (FAPbI3) perovskites allows broader absorption of the solar spectrum relative to conventional methylammonium lead iodide (MAPbI3). Because the optoelectronic properties of perovskite films are closely related to film quality, deposition of dense and uniform films is crucial for fabricating high-performance perovskite solar cells (PSCs). We report an approach for depositing high-quality FAPbI3 films, involving FAPbI3 crystallization by the direct intramolecular exchange of dimethylsulfoxide (DMSO) molecules intercalated in PbI2 with formamidinium iodide. This process produces FAPbI3 films with (111)-preferred crystallographic orientation, large-grained dense microstructures, and flat surfaces without residual PbI2. Using films prepared by this technique, we fabricated FAPbI3-based PSCs with maximum power conversion efficiency greater than 20%.