Author
Alex K.-Y. Jen
Other affiliations: University of Nebraska–Lincoln, Zhejiang California International NanoSystems Institute, University of Washington ...read more
Bio: Alex K.-Y. Jen is an academic researcher from City University of Hong Kong. The author has contributed to research in topics: Perovskite (structure) & Polymer solar cell. The author has an hindex of 128, co-authored 921 publications receiving 61811 citations. Previous affiliations of Alex K.-Y. Jen include University of Nebraska–Lincoln & Zhejiang California International NanoSystems Institute.
Papers published on a yearly basis
Papers
More filters
TL;DR: A novel fullerene cathode interlayer is employed to facilitate the fabrication of stable and efficient perovskite solar cells to enable 80% of the initial PCE to be retained after being exposed in ambient condition with 20% relative humidity for 14 days.
Abstract: A novel fullerene cathode interlayer is employed to facilitate the fabrication of stable and efficient perovskite solar cells. This modified fullerene surfactant significantly increases air stability of the derived devices due to its hydrophobic characteristics to enable 80% of the initial PCE to be retained after being exposed in ambient condition with 20% relative humidity for 14 days.
85 citations
84 citations
TL;DR: In this paper, a series of efficient and bright white light-emitting diodes were fabricated using the blends of two fluorene-derived fluorescent dyes, (4,7-bis-(9, 9, 9′,9′-tetrahexyl-9H,9, 2.2′]bifluoren-7-yl)-benzo[1, 2, 5]thiadiazole) (FFBFF-emits green) and (4.7)-bis-(5,9-bis)-thiophen
Abstract: A series of efficient and bright white light-emitting diodes were fabricated using the blends of two fluorene-derived fluorescent dyes, (4,7-bis-(9,9,9′,9′-tetrahexyl-9H,9′H-[2,2′]bifluoren-7-yl)-benzo[1,2,5]thiadiazole) (FFBFF-emits green) and (4,7-bis-[5-(9,9-dihexyl-9H-fluoren-2-yl)-thiophen-2-yl]-benzo[1,2,5]thiadiazole) (FTBTF-emits red) in an efficient blue-emitting polyfluorene-derived copolymer (poly[(9,9-bis(4-di(4-n-butylphenyl)aminophenyl))]-stat-(9,9-bis(4-(5-(4-tert-butylphenyl)-2-oxadiazolyl)-phenyl))-stat-(9,9-di-n-octyl)fluorene) (PF-TPA-OXD). The resulting white light-emitting device reaches a maximum external quantum efficiency of 0.82% and a maximum brightness of 12900cd∕m2 at 12V. The Commission Internationale d’Enclairage chromaticity coordinates of the device remain very close to that of pure white emission at a relatively broad bias range from 6V(x=0.36,y=0.37)to12V(x=0.34,y=0.34).
83 citations
TL;DR: High conductivity and stochastic switching of anthracene-terminated phenylethynylthiolates within alkanethiolate monolayers, as well as in situ photochemical transformations, have been observed and distinguished with the scanning tunneling microscope (STM).
Abstract: The products of photoreactions of conjugated organic molecules may be allowed by selection rules but not observed in solution reactions because of unfavorable reaction geometries. We have used defect sites in self-assembled alkanethiolate monolayers on gold surfaces to direct geometrically unfavorable photochemical reactions between individual organic molecules. High conductivity and stochastic switching of anthracene-terminated phenylethynylthiolates within alkanethiolate monolayers, as well as in situ photochemical transformations, have been observed and distinguished with the scanning tunneling microscope (STM). Ultraviolet light absorbed during imaging increases the apparent heights of excited molecules in STM images, a direct manifestation of probing electronically excited states.
83 citations
TL;DR: This core-bishell design concept of plasmonic nanostructures demonstrates a general approach to improving the photovoltaic performance with both optical and electrical contributions.
Abstract: To maximize light coupling into the active layer, plasmonic nanostructures have been incorporated into both active layers of organic solar cells (OSCs) and perovskite solar cells (PSCs) with the aim of increasing light absorption, but reports have shown controversial results in electrical characteristics. In this work, we introduce a core-bishell concept to build plasmonic nanoparticles (NPs) with metal-inorganic semiconductor-organic semiconductor nanostructure. Specifically, Ag NPs were decorated with a titania/benzoic-acid-fullerene bishell (Ag@TiO2@Pa), which enables the NPs to be compatible with fullerene acceptors or a perovskite absorber. Moreover, coating the Ag@TiO2 NP with a fullerene shell can activate efficient plasmon-exciton coupling and eliminate the charge accumulation, thus facilitating exciton dissociation and reducing the monomolecular recombination. The improved light absorption and enhanced carrier extraction of devices with Ag@TiO2@Pa nanoparticles are responsible for the improved short-circuit current and fill factor, respectively. On the basis of the synergistic effects (optical and electrical), a series of plasmonic OSCs exhibited enhancement of 12.3-20.7% with a maximum power conversion efficiency of 13.0%, while the performance of plasmonic PSCs also showed an enhancement by 10.2% from 18.4% to 20.2%. This core-bishell design concept of plasmonic nanostructures demonstrates a general approach to improving the photovoltaic performance with both optical and electrical contributions.
83 citations
Cited by
More filters
TL;DR: In this article, transient absorption and photoluminescence-quenching measurements were performed to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide and triiodide perovskite absorbers.
Abstract: Organic-inorganic perovskites have shown promise as high-performance absorbers in solar cells, first as a coating on a mesoporous metal oxide scaffold and more recently as a solid layer in planar heterojunction architectures. Here, we report transient absorption and photoluminescence-quenching measurements to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide (CH3NH3PbI(3-x)Cl(x)) and triiodide (CH3NH3PbI3) perovskite absorbers. We found that the diffusion lengths are greater than 1 micrometer in the mixed halide perovskite, which is an order of magnitude greater than the absorption depth. In contrast, the triiodide absorber has electron-hole diffusion lengths of ~100 nanometers. These results justify the high efficiency of planar heterojunction perovskite solar cells and identify a critical parameter to optimize for future perovskite absorber development.
8,199 citations
Journal Article•
TL;DR: In this paper, transient absorption and photoluminescence-quenching measurements were performed to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide and triiodide perovskite absorbers.
Abstract: Organic-inorganic perovskites have shown promise as high-performance absorbers in solar cells, first as a coating on a mesoporous metal oxide scaffold and more recently as a solid layer in planar heterojunction architectures. Here, we report transient absorption and photoluminescence-quenching measurements to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide (CH3NH3PbI(3-x)Cl(x)) and triiodide (CH3NH3PbI3) perovskite absorbers. We found that the diffusion lengths are greater than 1 micrometer in the mixed halide perovskite, which is an order of magnitude greater than the absorption depth. In contrast, the triiodide absorber has electron-hole diffusion lengths of ~100 nanometers. These results justify the high efficiency of planar heterojunction perovskite solar cells and identify a critical parameter to optimize for future perovskite absorber development.
6,454 citations
TL;DR: Perovskite films received a boost in photovoltaic efficiency through controlled formation of charge-generating films and improved current transfer to the electrodes and low-temperature processing steps allowed the use of materials that draw current out of the perovskites layer more efficiently.
Abstract: Advancing perovskite solar cell technologies toward their theoretical power conversion efficiency (PCE) requires delicate control over the carrier dynamics throughout the entire device. By controlling the formation of the perovskite layer and careful choices of other materials, we suppressed carrier recombination in the absorber, facilitated carrier injection into the carrier transport layers, and maintained good carrier extraction at the electrodes. When measured via reverse bias scan, cell PCE is typically boosted to 16.6% on average, with the highest efficiency of ~19.3% in a planar geometry without antireflective coating. The fabrication of our perovskite solar cells was conducted in air and from solution at low temperatures, which should simplify manufacturing of large-area perovskite devices that are inexpensive and perform at high levels.
5,789 citations
TL;DR: This paper presents a meta-analysis of the chiral stationary phase transition of Na6(CO3)(SO4)2, a major component of the response of the immune system to Na2CO3.
Abstract: Ju Mei,†,‡,∥ Nelson L. C. Leung,†,‡,∥ Ryan T. K. Kwok,†,‡ Jacky W. Y. Lam,†,‡ and Ben Zhong Tang*,†,‡,§ †HKUST-Shenzhen Research Institute, Hi-Tech Park, Nanshan, Shenzhen 518057, China ‡Department of Chemistry, HKUST Jockey Club Institute for Advanced Study, Institute of Molecular Functional Materials, Division of Biomedical Engineering, State Key Laboratory of Molecular Neuroscience, Division of Life Science, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China Guangdong Innovative Research Team, SCUT-HKUST Joint Research Laboratory, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China
5,658 citations
TL;DR: An approach for depositing high-quality FAPbI3 films, involving FAP bI3 crystallization by the direct intramolecular exchange of dimethylsulfoxide (DMSO) molecules intercalated in PbI2 with formamidinium iodide is reported.
Abstract: The band gap of formamidinium lead iodide (FAPbI3) perovskites allows broader absorption of the solar spectrum relative to conventional methylammonium lead iodide (MAPbI3). Because the optoelectronic properties of perovskite films are closely related to film quality, deposition of dense and uniform films is crucial for fabricating high-performance perovskite solar cells (PSCs). We report an approach for depositing high-quality FAPbI3 films, involving FAPbI3 crystallization by the direct intramolecular exchange of dimethylsulfoxide (DMSO) molecules intercalated in PbI2 with formamidinium iodide. This process produces FAPbI3 films with (111)-preferred crystallographic orientation, large-grained dense microstructures, and flat surfaces without residual PbI2. Using films prepared by this technique, we fabricated FAPbI3-based PSCs with maximum power conversion efficiency greater than 20%.
5,458 citations