Alex K.-Y. Jen

Bio: Alex K.-Y. Jen is an academic researcher from City University of Hong Kong. The author has contributed to research in topics: Perovskite (structure) & Polymer solar cell. The author has an hindex of 128, co-authored 921 publications receiving 61811 citations. Previous affiliations of Alex K.-Y. Jen include University of Nebraska–Lincoln & Zhejiang California International NanoSystems Institute.

All‐Organic Photopatterned One Diode‐One Resistor Cell Array for Advanced Organic Nonvolatile Memory Applications

Abstract: ONVM is one emerging technology that has been explored as the next generation data storage media. In literature, there are numerous reports regarding the switching mechanisms for ONVM devices, [ 15–18 ] as well as the development of new organic materials [ 15 , 18–21 ] and device architectures [ 22–27 ] for ONVM applications. Research on novel device architectures can potentially generate more reliable organic memory devices with higher density and improved performance, while simultaneously mitigating misreading (cross-talk) issues. For these reasons, organic one diode-one resistor (1D–1R) type devices have been demonstrated. [ 23,24 ] However, these devices exhibit irreversible switching behavior and are nonpatternable, which strongly limits their application in systems that require both an array architecture and rewritable memory capability. Recently, we have reported a hybrid type 1T–1R and 1D–1R device architecture, which is composed of a hybrid ONVM device with Si-based transistors or Si schottky diodes. [ 25,26 ]

Hydrophobic Chromophores in Aqueous Micellar Solution Showing Large Two‐Photon Absorption Cross Sections

Abstract: A series of new hydrophobic two-photon absorbing (2PA) chromophores with varied electron-donating groups in quasi-linear and multibranched structures are synthesized to correlate their structure/photophysical property relationships. The feasibility of using these large two-photon absorption cross-sectional (δ, expressed in GM = 1 × 10–50 cm4 s photon–1 molecule–1) materials in aqueous solution is also explored. All four hydrophobic 2PA materials can be encapsulated into micelles generated by dispersing an amphiphilic block copolymer, poly(methacrylic acid)-block-polystyrene (PMAA-b-PS), into water. The micellar nanostructures are characterized using dynamic light scattering, atomic force microscopy, and transmission electron microscopy. After these dyes are incorporated into micelles, they exhibit strong fluorescence in water. It is found that the quantum yield and δ values of these chromophores are strongly dependent on the diameters of the micelles, concentrations of the PMAA-b-PS, and molecular structures of the 2PA chromophores. One of the compounds that has a strong triarylamino donor and a multibranched structure exhibits a large δ value of 2790 GM and high quantum yield (0.56) in micelle-containing water. Although this value is smaller than the original value of 5300 GM in toluene, it is still substantially larger than the values of most water-soluble 2PA materials, which have δ values of less than 100 GM.

Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber.

Abstract: Organic-inorganic perovskites have shown promise as high-performance absorbers in solar cells, first as a coating on a mesoporous metal oxide scaffold and more recently as a solid layer in planar heterojunction architectures. Here, we report transient absorption and photoluminescence-quenching measurements to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide (CH3NH3PbI(3-x)Cl(x)) and triiodide (CH3NH3PbI3) perovskite absorbers. We found that the diffusion lengths are greater than 1 micrometer in the mixed halide perovskite, which is an order of magnitude greater than the absorption depth. In contrast, the triiodide absorber has electron-hole diffusion lengths of ~100 nanometers. These results justify the high efficiency of planar heterojunction perovskite solar cells and identify a critical parameter to optimize for future perovskite absorber development.

Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber

Abstract: Organic-inorganic perovskites have shown promise as high-performance absorbers in solar cells, first as a coating on a mesoporous metal oxide scaffold and more recently as a solid layer in planar heterojunction architectures. Here, we report transient absorption and photoluminescence-quenching measurements to determine the electron-hole diffusion lengths, diffusion constants, and lifetimes in mixed halide (CH3NH3PbI(3-x)Cl(x)) and triiodide (CH3NH3PbI3) perovskite absorbers. We found that the diffusion lengths are greater than 1 micrometer in the mixed halide perovskite, which is an order of magnitude greater than the absorption depth. In contrast, the triiodide absorber has electron-hole diffusion lengths of ~100 nanometers. These results justify the high efficiency of planar heterojunction perovskite solar cells and identify a critical parameter to optimize for future perovskite absorber development.

Interface engineering of highly efficient perovskite solar cells

Abstract: Advancing perovskite solar cell technologies toward their theoretical power conversion efficiency (PCE) requires delicate control over the carrier dynamics throughout the entire device. By controlling the formation of the perovskite layer and careful choices of other materials, we suppressed carrier recombination in the absorber, facilitated carrier injection into the carrier transport layers, and maintained good carrier extraction at the electrodes. When measured via reverse bias scan, cell PCE is typically boosted to 16.6% on average, with the highest efficiency of ~19.3% in a planar geometry without antireflective coating. The fabrication of our perovskite solar cells was conducted in air and from solution at low temperatures, which should simplify manufacturing of large-area perovskite devices that are inexpensive and perform at high levels.

Aggregation-Induced Emission: Together We Shine, United We Soar!

Abstract: Ju Mei,†,‡,∥ Nelson L. C. Leung,†,‡,∥ Ryan T. K. Kwok,†,‡ Jacky W. Y. Lam,†,‡ and Ben Zhong Tang*,†,‡,§ †HKUST-Shenzhen Research Institute, Hi-Tech Park, Nanshan, Shenzhen 518057, China ‡Department of Chemistry, HKUST Jockey Club Institute for Advanced Study, Institute of Molecular Functional Materials, Division of Biomedical Engineering, State Key Laboratory of Molecular Neuroscience, Division of Life Science, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China Guangdong Innovative Research Team, SCUT-HKUST Joint Research Laboratory, State Key Laboratory of Luminescent Materials and Devices, South China University of Technology, Guangzhou 510640, China

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Abstract: The band gap of formamidinium lead iodide (FAPbI3) perovskites allows broader absorption of the solar spectrum relative to conventional methylammonium lead iodide (MAPbI3). Because the optoelectronic properties of perovskite films are closely related to film quality, deposition of dense and uniform films is crucial for fabricating high-performance perovskite solar cells (PSCs). We report an approach for depositing high-quality FAPbI3 films, involving FAPbI3 crystallization by the direct intramolecular exchange of dimethylsulfoxide (DMSO) molecules intercalated in PbI2 with formamidinium iodide. This process produces FAPbI3 films with (111)-preferred crystallographic orientation, large-grained dense microstructures, and flat surfaces without residual PbI2. Using films prepared by this technique, we fabricated FAPbI3-based PSCs with maximum power conversion efficiency greater than 20%.