scispace - formally typeset
Search or ask a question
Author

Alexander I. Yanovsky

Bio: Alexander I. Yanovsky is an academic researcher from A. N. Nesmeyanov Institute of Organoelement Compounds. The author has contributed to research in topics: Crystal structure & Bond length. The author has an hindex of 8, co-authored 12 publications receiving 236 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: The hexanuclear complex of calcium oxo ethoxide ethanol solvate, [Ca6O2(OEt)8]·14EtOH 1 has been isolated after the prolonged refluxing of an ethanol solution of calcium ethoxide in the presence of the oxygen in air and studied by X-ray diffraction as mentioned in this paper.
Abstract: The hexanuclear complex of calcium oxo ethoxide ethanol solvate, [Ca6O2(OEt)8]·14EtOH 1 has been isolated after the prolonged refluxing of an ethanol solution of calcium ethoxide in the presence of the oxygen in air and studied by X-ray diffraction; the metal-oxygen framework is built of two [Ca4O4] cubes sharing a common [Ca2O2] face, which involves both oxo groups.

44 citations

Journal ArticleDOI
TL;DR: An X-ray structural study of the crystals isolated from the solutions obtained by the reaction of Ba metal with Ti(OPri)4 in isopropyl alcohol has been carried out; the crystals of the compound, which is a precursor for the synthesis of BaTiO3, contain molecules of two different kinds [Ba4Ti4O4(OR)16(ROH)4], where R = Pri as mentioned in this paper.
Abstract: An X-ray structural study of the crystals isolated from the solutions obtained by the reaction of Ba metal with Ti(OPri)4 in isopropyl alcohol has been carried out; the crystals of the compound, which is a precursor for the synthesis of BaTiO3, contain molecules of two different kinds [Ba4Ti4O4(OR)16(ROH)4] and [Ba4Ti4O4(OR)16(ROH)3], where R = Pri.

28 citations

Journal ArticleDOI
TL;DR: In this paper, a polynuclear complex (me3sn)3sn]2Ln(THF)4 (Ln  Sm (1), Yb (2)) has been synthesized by reacting Me3snCl with samarium or ytterbium in THF.

27 citations

Journal ArticleDOI
TL;DR: The electrochemical synthesis of Sc(OMe)3, Sc(OEt)3 and Sc5O(OPri)13 (3) was carried out via anodic oxidation of scandium metal in aliphatic alcohols as discussed by the authors.

25 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: 96 Samarium diiodide acted as reducing agent in the reaction with (phenylenebis(3,5-tBu4-salicylidene)iminato)sodium, which resulted in formation of the THF adduct {P2N2}YCH2SiMe3(THF), whereas the THf-free compound could only be isolated as a highly reactive oily material.
Abstract: ion upon treatment with B(C6F5)3 in THF to generate the cationic species [(MAC)Y(CH2SiMe3)][B(C6F5)3(CH2SiMe3)]. However, this salt was found to be highly unstable and could not be isolated as a pure material.97 Fryzuk et al. have developed a remarkable organoyttrium chemistry around the phosphorus-containing macrocycle syn-{P2N2} ({P2N2} ) [PhP(CH2SiMe2NSiMe2CH2)2PPh]). The starting material was the chloride-bridged dimer [{P2N2}Y(μ-Cl)]2, which can be prepared in 95% yield by the reaction of synLi2(THF){P2N2} with YCl3(THF)3 in THF solution. Straightforward metathesis using the very bulky alkyllithium reagent LiCH(SiMe3)2 according to eq 29 (methyl groups on Si omitted for clarity) afforded the monomeric yttrium alkyl species {P2N2}YCH(SiMe3)2 in 92% yield. Use of the less sterically hindered alkyl moiety CH2SiMe3 followed by addition of THF resulted in formation of the THF adduct {P2N2}YCH2SiMe3(THF), whereas the THF-free compound could only be isolated as a highly reactive oily material.98 A quite remarkable samarium alkyl complex of complicated molecular structure was reported by Gambarotta et al.99 Samarium diiodide acted as reducing agent in the reaction with (phenylenebis(3,5-tBu4-salicylidene)iminato)sodium, (3,5tBu4salophen)Na2(THF)3, to give dimeric [Sm2(SBSB)(THF)3]‚2toluene (SB-SB ) C-C bonded 3,5tBu4salophen dimer). The new ligand resulted from the reductive coupling of two imino functional groups of two 3,5-tBu4salophenSm units. Subsequent treatment with MeLi resulted in a novel oxo-bridged dimer (24), featuring alkylation of both samarium atoms and arising from cleavage of the C-C bond connecting the two units, as well as complete reduction of the imine groups of the salophen ligands and THF deoxygenation. In the formula drawing depicted here the bridging phenylene rings are omitted for clarity.99 Carbene complexes of the lanthanide elements have first become available through the use of the stable Arduengo-type carbenes.100,101 Organolanthanide derivatives are readily accessible by adding the heterocyclic carbene ligands to various diand trivalent rare earth complexes such as decamethylsamarocene. Cyclopentadienyl-free derivatives have been obtained by reacting 1,3,4,5-tetramethylimidazol-2-ylidene with the tris(2,2,6,6-tetramethylheptane-3,5-dionato) complexes of yttrium and europium, Ln(THD)3 (Ln ) Y, Eu). The two carbene complexes 25 were isolated as white solids in quantitative yield. The europium complex was structurally characterized by X-ray analysis. Despite the differences in the ionic radii of the two metals 7-coordinate monocarbene adducts are formed in both cases. With 266.3(4) pm the Eu-C distance in (1,3,4,5-tetramethylimidazol-2-ylidene)Eu(THD)3 is comparable to Pr(III)-C and Sm(III)-C distances reported for some isonitrile complexes.102,103 In the 13C NMR spectrum of the yttrium complex the resonance for the former carbene carbon is at δ 199.38 (cf. δ 214 for the free carbene ligand) and shows a 13C-89Y coupling of 33 Hz which indicates that the Y-C bond does not dissociate rapidly on the NMR time scale.101 The bulkier 1,3-diisopropyl-4,5dimethylimidazol-2-ylidene (iPr-Carb) has been used to synthesize a mixed carbene-THF alkyl Lu(CH2SiMe3)3(THF)(Pr-Carb) (26).22d Due to its higher steric demand, the carbene ligand occupies an equatorial position (Lu-C(Carb) ) 249 pm). Somewhat related to the carbene complexes is a highly unusual monomeric samarium bis(iminophosphoranyl) chelate complex which has been reported by Cavell et al.104 Addition of H2C(Ph2PdNSiMe3)2 to a toluene solution of samarium tris(dicyclohexylamide) afforded bright yellow [κ-C,N,N′-C(Ph2Pd NSiMe3)2]Sm(NCy2)(THF) (27). The core of the molecule consists of two nearly planar, fused fourmembered rings with a Sm-C shared edge. With 246.7(4) pm the Sm-C bond length is considerably shorter (10%) than the average samarium-carbon distances, indicating that 27 can be formulated as a carbene complex. Non-Cyclopentadienyl Organolanthanide Complexes Chemical Reviews, 2002, Vol. 102, No. 6 1865

438 citations

Journal ArticleDOI
TL;DR: Catalytic activities and stereoselectivities are influenced by the length of the linker between the cyclopentadienyl and the amido-functionality and the substituents at the amidonitrogen.
Abstract: ion using borate reagents [Ph3C][B(C6F5)4] and [PhNMe2H][B(C6F5)4], respectively, results in highly active polymerization catalysts (Table 4). Scandium bis(alkyl) complex 51Sc shows excellent activity for the syndiospecific styrene homopolymerization (activity, 1.36 × 104 (kg PS)/ (mol Sc h); Mw/Mn ) 1.37), and complexes 51, 53, and 54 proved suitable for the coand terpolymerization of a series of monomers.204,206,210-225 8.2.3. Constraint Geometry Complexes Incorporation of the cyclopentadienyl ancillary ligand into a chelate array of (pendant) donor functionalities gives access to prominent Cp derivatives. Since the original introduction by the Bercaw group, the linked amido-cyclopentadienyl (Cp) ligand has advanced to be one of the most versatile ligands for group 4 metal polymerization catalysts.235 Catalysts based on this type of ligand provide a constrained ligand environment but are anticipated to be more active toward sterically demanding monomers than metallocenes. Aminecyclopentadiene proligands react with Ln(CH2SiMe3)3(thf)x (Jthf) according to an alkane-elimination reaction in a similar manner as shown in Scheme 30. Because of the dianionic nature of the resulting ligand, only one [CH2SiMe3] ligand is retained in the resulting compounds, which allows for further derivatization (Chart 11). In the presence of Ph3SiH or H2, complexes 66-73 form dimeric hydrido complexes,176,177,204,236 showing high potential in the catalytic hydrosilylation of olefins.226,237,238 Catalytic activities and stereoselectivities are hereby influenced by the length of the linker between the cyclopentadienyl and the amido-functionality and the substituents at the amidonitrogen.237 Remarkable catalytic activity was observed for complexes 68cyclohexyl. Upon activation with equimolar amounts of [Ph3C][B(C6F5)4], such compounds polymerized ethylene and isoprene, regiospecifically yielding 3,4-polyisoprene with isotactic-rich stereo microstructures and relatively narrow molecular weight distribution (Mw/Mn ) 1.8).222 Complex 67Y was found to initiate the polymerization of the polar monomers tert-butyl acrylate and acrylonitrile, however, yielding atactic polymeric products (see Table 5).204 8.2.4. Complexes with Neutral Nitrogenand Oxygen-Based Ligands While early work in organorare-earth metal chemistry was dominated by complexes supported by cyclopentadienyl-type ligands of varying substitution and modification, the limitations inherent to these ligand sets triggered the development of alternative ancillary ligands. Particularly in the past 15 years, advanced ligand design gave access to a wide variety of rare-earth metal complexes supported by noncyclopentadienyl ligand environments. Because of the Lewis acidic nature of the rare-earth metal ions, ligands based on the hard donor elements oxygen and nitrogen are most commonly used, while some notable exceptions have been reported. To avoid ligand redistribution, multidentate ligands are generally favored. Since rare-earth metal cations are invariable in the +3 oxidation state (except Eu(II), Sm(II), Yb(II), and Ce(IV)), neutral, monoanionic, or dianionic ligand sets are the most desirable. Table 4. Further Applications of Half-Sandwich Complexes (Cp)Ln(CH2SiMe3)2(donor)x compound further application ref 50 [CH2SiMe3] exchange reactions 205-209 formation of mono(cations) alternating ethylene-norbornene copolymerization

244 citations

Journal ArticleDOI
TL;DR: The remarkably large cluster Sc4(mu3-O)2 has been obtained trapped inside an Ih-C80 cage by conducting the vaporization of graphite rods doped with copper(II) nitrate and scandium(III) oxide in an electric arc under a low pressure helium atmosphere with an added flow of air.
Abstract: The remarkably large cluster Sc4(μ3-O)2 has been obtained trapped inside an Ih-C80 cage by conducting the vaporization of graphite rods doped with copper(II) nitrate and scandium(III) oxide in an electric arc under a low pressure helium atmosphere with an added flow of air. The product has been isolated by chromatography and identified by high-resolution mass spectrometry. The structure of Sc4(μ3-O)2@Ih-C80 has been determined by X-ray crystallography on a crystal of Sc4(μ3-O)2@Ih-C80·NiII(OEP)·2(C6H6). The Sc4(μ3-O)2 unit consists of a distorted tetrahedron of scandium atoms with oxygen atoms bridging two of its faces. The Sc−Sc distances range from 2.946(7) to 3.379(7) A.

192 citations

Journal ArticleDOI
TL;DR: ErSc2N@C80 as mentioned in this paper is a mixed metal endohedral, which was determined by single-crystal X-ray diffraction at 90 K on ErSc2n@C 80·CoII(OEP)·1.5C6H6·0.3CHCl3.
Abstract: The ErnSc3-nN@C80 (n = 0−3) family of four endohedral fullerenes has been prepared by vaporization of graphite rods packed with 2% Sc2O3/3% Er2O3/95% graphite powder in a Kratschmer−Huffman fullerene generator under dynamic flow of helium and dinitrogen. ErSc2N@C80 has been isolated in pure form via three stages of high-pressure liquid chromatography and characterized by mass spectrometry. The first structure of a mixed metal endohedral, ErSc2N@C80, has been determined by single-crystal X-ray diffraction at 90 K on ErSc2N@C80·CoII(OEP)·1.5C6H6·0.3CHCl3, which was obtained by diffusion of a solution of ErSc2N@C80 in benzene into a solution of CoII(OEP) (OEP is the dianion of octaethylporphyrin) in chloroform. The structure of ErSc2N@C80 consists of a planar ErSc2N unit surrounded by an icosahedral C80 cage. The nominal Er−N distance is 2.089(9) A and the Sc−N distance is, as expected, shorter, 1.968(6) A. Despite its location within the C80 cage, the ErSc2N unit displays a remarkable degree of order within...

167 citations