scispace - formally typeset
Search or ask a question
Author

Alexander J. Boyland

Other affiliations: Wellington Management Company
Bio: Alexander J. Boyland is an academic researcher from University of Southampton. The author has contributed to research in topics: Fiber laser & Optical fiber. The author has an hindex of 19, co-authored 65 publications receiving 1139 citations. Previous affiliations of Alexander J. Boyland include Wellington Management Company.

Papers published on a yearly basis

Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, the photodarkening of Yb-doped aluminosilicate fibers by continuous wave 488 nm irradiation was investigated and the irradiation induced significant excess loss in the UV-visible spectroscopy (VIS) region in Ybdoped Al-O 2.
Abstract: Photodarkening of Yb-doped aluminosilicate fibers by continuous wave 488 nm irradiation was investigated. The irradiation induced significant excess loss in the UV-visible spectroscopy (VIS) region in Yb-doped aluminosilicate fibers while pure aluminosilicate fibers showed negligible induced loss. Ultraviolet-VIS-near infrared spectroscopy revealed an absorption peak at 220 nm in unexposed Yb-doped aluminosilicate fiber preforms. The observed peak was attributed to Yb-associated oxygen deficiency centers (ODCs) and proposed as a precursor of the photodarkening. The proposed model was supported by measurements on oxygen loaded Yb-doped aluminosilicate fibers. In these, the photodarkening could be significantly reduced, which we attribute to a smaller number of ODCs following oxygen loading.

149 citations

Journal ArticleDOI
TL;DR: In this paper, a cladding-pumped ytterbium-doped fiber laser was demonstrated to achieve 2.1 kW of continuous-wave output power at 1.1 µm.
Abstract: We have demonstrated a highly efficient cladding-pumped ytterbium-doped fiber laser, generating >2.1 kW of continuous-wave output power at 1.1 µm with 74% slope efficiency with respect to launched pump power. The beam quality factor (M2) was better than 1.2. The maximum output power was only limited by available pump power, showing no evidence of roll-over even at the highest output power. We present data on how the beam quality depends on the fiber parameter, based on our current and past fiber laser developments. We also discuss the ultimate power-capability of our fiber in terms of thermal management, Raman nonlinear scattering, and material damage, and estimate it to 10 kW

130 citations

Journal ArticleDOI
TL;DR: In this article, a high-power single-frequency mode-hop-free fiber distributed Bragg reflector (DBR) laser fabricated from Tm-doped photosensitive alumino-silicate fiber and in-band pumped by an Er/Yb fiber laser at 1565 nm was reported.
Abstract: We report on a high-power single-frequency mode-hop-free fiber distributed Bragg reflector (DBR) laser fabricated from Tm-doped photosensitive alumino-silicate fiber and in-band pumped by an Er/Yb fiber laser at 1565 nm. The fiber DBR laser yielded up to 580 mW of single-frequency single-ended output at 1943 nm for ~ 5 W of absorbed pump power. Further scaling of the DBR laser output power was achieved with the aid of a simple Tm-doped fiber amplifier stage spliced directly to the DBR fiber without the need of an optical isolator. The maximum output power from the DBR laser and fiber amplifier was 2.9 W for a combined absorbed pump power of 9 W. The merits of this DBR laser architecture compared to conventional DBR and distributed-feedback laser configurations are discussed.

67 citations

Journal ArticleDOI
TL;DR: In this paper, the authors report on the fabrication and characterization of rare-earth doped silica fibers manufactured using an in-situ solution doping technique, which is compatible with conventional modified chemical vapor deposition equipment.
Abstract: We report on the fabrication and characterization of rare-earth doped silica fibers manufactured using an in-situ solution doping technique, which is compatible with conventional modified chemical vapor deposition equipment. The in-situ technique permits significantly more doped layers to be deposited, compared to conventional solution doping, and is directly applicable for the fabrication of large core rare-earth doped fibers suitable for high-power fiber sources. Ytterbium-doped aluminosilicate fibers fabricated using the new in-situ doping technique are reported and the results are compared to fibers fabricated using a conventional solution doping method.

66 citations

Journal ArticleDOI
TL;DR: High-power operation of a fiber distributed-feedback (DFB) laser fabricated from Tm-doped photosensitive alumino-silicate fiber and in-band pumped by an Er/Yb fiber laser at 1565 nm is reported.
Abstract: We report on high-power operation of a fiber distributed-feedback (DFB) laser fabricated from Tm-doped photosensitive alumino-silicate fiber and in-band pumped by an Er/Yb fiber laser at 1565 nm. The fiber DFB laser yielded up to 875 mW of single-ended output at 1943 nm on two orthogonally polarized modes for 3.5 W of absorbed pump power. Further scaling of the DFB laser output power was achieved with the aid of a simple Tm-doped fiber amplifier stage spliced directly to the DFB fiber without the need of an optical isolator. The maximum output power from the DFB laser and fiber amplifier was >3 W for a combined absorbed pump power of 8.1 W. The influence of thermal loading, owing to quantum defect heating in the Tm-doped core, on the output power and longitudinal mode behavior is discussed, and the prospects for further improvement in performance are considered.

65 citations


Cited by
More filters
Proceedings Article
01 Jan 1999
TL;DR: In this paper, the authors describe photonic crystals as the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures, and the interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.
Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

2,722 citations

Journal ArticleDOI
TL;DR: This paper reviews the current state of the art in terms of continuous-wave and pulsed performance of ytterbium-doped fiber lasers, the current fiber gain medium of choice, and by far the most developed in Terms of high-power performance.
Abstract: The rise in output power from rare-earth-doped fiber sources over the past decade, via the use of cladding-pumped fiber architectures, has been dramatic, leading to a range of fiber-based devices with outstanding performance in terms of output power, beam quality, overall efficiency, and flexibility with regard to operating wavelength and radiation format. This success in the high-power arena is largely due to the fiber’s geometry, which provides considerable resilience to the effects of heat generation in the core, and facilitates efficient conversion from relatively low-brightness diode pump radiation to high-brightness laser output. In this paper we review the current state of the art in terms of continuous-wave and pulsed performance of ytterbium-doped fiber lasers, the current fiber gain medium of choice, and by far the most developed in terms of high-power performance. We then review the current status and challenges of extending the technology to other rare-earth dopants and associated wavelengths of operation. Throughout we identify the key factors currently limiting fiber laser performance in different operating regimes—in particular thermal management, optical nonlinearity, and damage. Finally, we speculate as to the likely developments in pump laser technology, fiber design and fabrication, architectural approaches, and functionality that lie ahead in the coming decade and the implications they have on fiber laser performance and industrial/scientific adoption.

1,689 citations

Journal ArticleDOI
TL;DR: In this article, the authors present the basis for each technique, recent developments in methods and performance limitations, and present a performance comparison of different techniques, taking data reported over the preceding decade, and draw conclusions from this benchmarking.
Abstract: The detection and measurement of gas concentrations using the characteristic optical absorption of the gas species is important for both understanding and monitoring a variety of phenomena from industrial processes to environmental change. This study reviews the field, covering several individual gas detection techniques including non-dispersive infrared, spectrophotometry, tunable diode laser spectroscopy and photoacoustic spectroscopy. We present the basis for each technique, recent developments in methods and performance limitations. The technology available to support this field, in terms of key components such as light sources and gas cells, has advanced rapidly in recent years and we discuss these new developments. Finally, we present a performance comparison of different techniques, taking data reported over the preceding decade, and draw conclusions from this benchmarking.

1,293 citations

Journal ArticleDOI
TL;DR: In this article, the fundamental properties and latest developments in high-power fiber lasers are summarized and reviewed, focusing primarily on the most common fiber laser configurations and the associated cladding pumping issues.
Abstract: In this paper, we summarize the fundamental properties and review the latest developments in high power fiber lasers. The review is focused primarily on the most common fiber laser configurations and the associated cladding pumping issues. Special attention is placed on pump combination techniques and the parameters that affect the brightness enhancement observed in single-mode and multimode high power fiber lasers. The review includes the major limitations imposed by fiber nonlinearities and other parasitic effects, such as optical damage, transverse modal instabilities and photodarkening. Finally, the paper summarizes the power evolution in continuous-wave and pulsed ytterbium-doped fiber lasers and their impact on industrial applications.

812 citations

Journal ArticleDOI
TL;DR: In this paper, a broad overview of rare earth resources and uses first and then of selected applications in dedicated fields such as telecommunications, lasers, photovoltaics (solar-energy conversion), lighting (fluorescent lamps and OLEDs), luminescent probes for bio-analyses and bio-imaging, as well as magnetism and magnetic refrigeration.
Abstract: In recent decades, rare earths have become vital to a wealth of advanced materials and technologies including catalysts, alloys, magnets, optics and lasers, rechargeable hydride batteries, electronics, economical lighting, wind- and solar-energy conversion, bio-analyses and imaging. In this perspective article we give a broad overview of rare earth resources and uses first and then of selected applications in dedicated fields such as telecommunications, lasers, photovoltaics (solar-energy conversion), lighting (fluorescent lamps and OLEDs), luminescent probes for bio-analyses and bio-imaging, as well as magnetism and magnetic refrigeration.

419 citations