Ali Turkcan

Bio: Ali Turkcan is an academic researcher from Kocaeli University. The author has contributed to research in topics: Diesel engine & Diesel fuel. The author has an hindex of 14, co-authored 25 publications receiving 1290 citations. Previous affiliations of Ali Turkcan include Marmara University.

Combustion analysis of preheated crude sunflower oil in an IDI diesel engine.

Abstract: In this study, preheated crude sunflower oil (PCSO) was tested for combustion and emission properties against petroleum based diesel fuel (PBDF) in a naturally aspirated, indirect injection (IDI) engine. The cylinder gas pressure and heat release curves for PCSO at 75 °C were similar to those of PBDF. The ignition delays for the PCSO were longer and the start of injection timing was earlier than for PBDF. The difference in the average brake torque was a decrease of 1.36% for PCSO though this was statistically insignificant. The brake specific fuel consumption increased by almost 5% more or less in proportion to the difference in calorific value, so that the 1.06% increase in thermal efficiency was again statistically insignificant. The emission test results showed that the decreases in CO 2 emissions and smoke opacity 2.05% and 4.66%, respectively; however, this was not statistically significant, though in line with the apparent increase in thermal efficiency. There was a significant 34% improvement in the emissions of unburnt hydrocarbons. Carbon monoxide increased by 1.77% again the result was not statistically significant given the small number of repeat tests. The use of PCSO does not have any negative effects on the engine performance and emissions in short duration engine testing.

Review of biodiesel composition, properties, and specifications

Abstract: Biodiesel is a renewable transportation fuel consisting of fatty acid methyl esters (FAME), generally produced by transesterification of vegetable oils and animal fats. In this review, the fatty acid (FA) profiles of 12 common biodiesel feedstocks were summarized. Considerable compositional variability exists across the range of feedstocks. For example, coconut, palm and tallow contain high amounts of saturated FA; while corn, rapeseed, safflower, soy, and sunflower are dominated by unsaturated FA. Much less information is available regarding the FA profiles of algal lipids that could serve as biodiesel feedstocks. However, some algal species contain considerably higher levels of poly-unsaturated FA than is typically found in vegetable oils. Differences in chemical and physical properties among biodiesel fuels can be explained largely by the fuels’ FA profiles. Two features that are especially influential are the size distribution and the degree of unsaturation within the FA structures. For the 12 biodiesel types reviewed here, it was shown that several fuel properties – including viscosity, specific gravity, cetane number, iodine value, and low temperature performance metrics – are highly correlated with the average unsaturation of the FAME profiles. Due to opposing effects of certain FAME structural features, it is not possible to define a single composition that is optimum with respect to all important fuel properties. However, to ensure satisfactory in-use performance with respect to low temperature operability and oxidative stability, biodiesel should contain relatively low concentrations of both long-chain saturated FAME and poly-unsaturated FAME.

Effect of biodiesel on engine performances and emissions

Abstract: As a renewable, sustainable and alternative fuel for compression ignition engines, biodiesel instead of diesel has been increasingly fueled to study its effects on engine performances and emissions in the recent 10 years. But these studies have been rarely reviewed to favor understanding and popularization for biodiesel so far. In this work, reports about biodiesel engine performances and emissions, published by highly rated journals in scientific indexes, were cited preferentially since 2000 year. From these reports, the effect of biodiesel on engine power, economy, durability and emissions including regulated and non-regulated emissions, and the corresponding effect factors are surveyed and analyzed in detail. The use of biodiesel leads to the substantial reduction in PM, HC and CO emissions accompanying with the imperceptible power loss, the increase in fuel consumption and the increase in NOx emission on conventional diesel engines with no or fewer modification. And it favors to reduce carbon deposit and wear of the key engine parts. Therefore, the blends of biodiesel with small content in place of petroleum diesel can help in controlling air pollution and easing the pressure on scarce resources without significantly sacrificing engine power and economy. However, many further researches about optimization and modification on engine, low temperature performances of engine, new instrumentation and methodology for measurements, etc., should be performed when petroleum diesel is substituted completely by biodiesel.

Production, characterization and performance of biodiesel as an alternative fuel in diesel engines – A review

Abstract: Due to the finite stock of fossil fuels and its negative impact on the environment, many countries across the world are now leaning toward renewable sources energies like solar energy, wind energy, biofuel, hydropower, geothermal and ocean energy to ensure energy for the countries development security. Biodiesel is one kind of biofuel that is renewable, biodegradable and has similar properties of fossil diesel fuel. The aim of this paper is to provide the substantial information on biodiesel to the researchers, engineers and policy makers. To achieve the goal, this paper summarizes the information on biofuel development, feedstocks around the world, oil extraction technic, biodiesel production processes. Furthermore, this paper will also discuss the advantages of biodiesel compared to fossil fuel. Finally, the combustion behavior of biodiesel in an internal combustion engine is discussed and it will help the researchers and policy maker and manufacturer. To determine the future and goal of automotive technology the study found that, feedstock selection for biodiesel production is very important as it associates 75% production cost. Moreover, the test of fuel properties is very important before using in the engine which depends on the type of feedstocks, origin country, and production process. Most of the researchers reported that the use of biodiesel in diesel engine reduces engine power slightly but reduces the harmful emission significantly. Finally, the study concludes that biodiesel has the potential to be used as a diesel fuel substitute in diesel engines to solve the energy and environment crisis.

Use of higher alcohol biofuels in diesel engines: A review

Abstract: Biofuels have grabbed the attention of engine researchers ever since the oil-crisis and escalating costs of petro-chemicals cropped up in the ׳70s. Ethanol and methanol were the most widely researched alcohols in IC engines. However, the last decade has witnessed significant amount of research in higher alcohols due to the development of modern fermentation processes using engineered micro-organisms that improved yield. Higher alcohols are attractive second/third generation biofuels that can be produced from sugary, starchy and ligno-cellulosic biomass feedstocks using sustainable pathways. The present work reviews the current literature concerning the effects of using higher alcohols ranging from 3-carbon propanol to 20-carbon phytol on combustion, performance and emission characteristics of a wide range of diesel engines under various test conditions. The literature is abound with evidence that higher alcohols reduce carcinogenic particulate emissions that are prevalent in diesel engines. NOx emissions either increased or decreased based on the domination of either cetane number or heat of evaporation. Brake specific fuel consumption (BSFC) of the engine usually suffered due to low energy content of alcohols. A notable feature is that the combination of higher alcohols (like butanol or pentanol), high exhaust gas recirculation (EGR) rates and late injection timing enabled low temperature combustion (LTC) in diesel engines that can simultaneously reduce smoke and NOx emissions with improved engine efficiency. It can be concluded that higher alcohols reduce smoke emissions with their fuel-borne oxygen; enhance air/fuel mixing by offering long ignition delay and eventually replace fossil diesel (partially or wholly) to enable a clean and efficient combustion in compression-ignition engines. The chief thrust areas include developing mutant strains with higher yield, higher tolerance to toxic inhibition and low-cost substrates for fermentation. Further work is required in stipulating optimum blend-fuel characteristics and ensuring the long-term durability of the engines using these fuels.