scispace - formally typeset
Search or ask a question
Author

Alice B. Chang

Other affiliations: University of Minnesota
Bio: Alice B. Chang is an academic researcher from California Institute of Technology. The author has contributed to research in topics: Block (telecommunications) & Polymerization. The author has an hindex of 13, co-authored 24 publications receiving 767 citations. Previous affiliations of Alice B. Chang include University of Minnesota.

Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, the synthesis, self-assembly, conductivity, and rheological properties of ABA triblock brush polymers (BBCPs) with grafted polystyrene (A block, NPS = 21) and poly(ethylene oxide) (B block, NPEO = 45) side chains are reported.
Abstract: The synthesis, self-assembly, conductivity, and rheological properties of ABA triblock brush polymers (BBCPs) with grafted polystyrene (A block, NPS = 21) and poly(ethylene oxide) (B block, NPEO = 45) side chains are reported. Two backbone molecular weights (NA:NB:NA = 11:78:11 and 15:119:15) were investigated with lithium bis(trifluoromethane)sulfonimide (LiTFSI) doping ratios 2 ≤ [EO]:[Li+] ≤ 20. Blends with 2 ≤ [EO]:[Li+] ≤ 10 suppress PEO crystallization and self-assemble into hexagonally packed cylinders of the minority gPS component. Conductivity is on the order of 10–3 S/cm at 105 °C with a corresponding elastic modulus ca. 104 Pa. The optimum conductivity occurs at a blend ratio near 10:1 [EO]:[Li+], similar to that reported for linear block copolymer analogues.

147 citations

Journal ArticleDOI
TL;DR: The approach disclosed in this work constitutes a powerful strategy for the synthesis of polymers spanning the linear-to-bottlebrush regimes with controlled grafting density and side chain distribution, molecular attributes that dictate micro- and macroscopic properties.
Abstract: Control over polymer sequence and architecture is crucial to both understanding structure–property relationships and designing functional materials. In pursuit of these goals, we developed a new synthetic approach that enables facile manipulation of the density and distribution of grafts in polymers via living ring-opening metathesis polymerization (ROMP). Discrete endo,exo-norbornenyl dialkylesters (dimethyl DME, diethyl DEE, di-n-butyl DBE) were strategically designed to copolymerize with a norbornene-functionalized polystyrene (PS), polylactide (PLA), or polydimethylsiloxane (PDMS) macromonomer mediated by the third-generation metathesis catalyst (G3). The small-molecule diesters act as diluents that increase the average distance between grafted side chains, generating polymers with variable grafting density. The grafting density (number of side chains/number of norbornene backbone repeats) could be straightforwardly controlled by the macromonomer/diluent feed ratio. To gain insight into the copolymer ...

121 citations

Journal ArticleDOI
TL;DR: The addition of short linear polymers to the BBCP arrays offers a facile means of improving the self-assembly and optical properties of these materials, as well as adding a route to achieving films with greater functionality and tailorability, without the need to develop or optimize the processing conditions for each new brush polymer synthesized.
Abstract: Brush block copolymers (BBCPs) enable the rapid fabrication of self-assembled one-dimensional photonic crystals with photonic band gaps that are tunable in the UV-vis-IR, where the peak wavelength of reflection scales with the molecular weight of the BBCPs. Due to the difficulty in synthesizing very large BBCPs, the fidelity of the assembled lamellar nanostructures drastically erodes as the domains become large enough to reflect IR light, severely limiting their performance as optical filters. To overcome this challenge, short linear homopolymers are used to swell the arrays to ∼180% of the initial domain spacing, allowing for photonic band gaps up to ∼1410 nm without significant opacity in the visible, demonstrating improved ordering of the arrays. Additionally, blending BBCPs with random copolymers enables functional groups to be incorporated into the BBCP array without attaching them directly to the BBCPs. The addition of short linear polymers to the BBCP arrays thus offers a facile means of improving the self-assembly and optical properties of these materials, as well as adding a route to achieving films with greater functionality and tailorability, without the need to develop or optimize the processing conditions for each new brush polymer synthesized.

110 citations

Journal ArticleDOI
TL;DR: The insights provided herein into the ROMP mechanism, monomer design, and homo- and copolymerization rate trends offer a general strategy for the design and synthesis of graft polymers with arbitrary architectures.
Abstract: Grafting density and graft distribution impact the chain dimensions and physical properties of polymers. However, achieving precise control over these structural parameters presents long-standing synthetic challenges. In this report, we introduce a versatile strategy to synthesize polymers with tailored architectures via grafting-through ring-opening metathesis polymerization (ROMP). One-pot copolymerization of an ω-norbornenyl macromonomer and a discrete norbornenyl comonomer (diluent) provides opportunities to control the backbone sequence and therefore the side chain distribution. Toward sequence control, the homopolymerization kinetics of 23 diluents were studied, representing diverse variations in the stereochemistry, anchor groups, and substituents. These modifications tuned the homopolymerization rate constants over 2 orders of magnitude (0.36 M–1 s–1 < khomo < 82 M–1 s–1). Rate trends were identified and elucidated by complementary mechanistic and density functional theory (DFT) studies. Building ...

94 citations

Journal ArticleDOI
TL;DR: In this paper, the linear viscoelastic behavior of poly(norbornene)-graft-poly(±-lactide) was investigated as a function of grafting density and overall molar mass.
Abstract: The linear viscoelastic behavior of poly(norbornene)-graft-poly(±-lactide) was investigated as a function of grafting density and overall molar mass. Eight sets of polymers with grafting densities ranging from 0 to 100% were synthesized by living ring-opening metathesis copolymerization. Within each set, the graft chain molar mass and spacing between grafts were fixed, while the total backbone length was varied. Dynamic master curves reveal that these polymers display Rouse and reptation dynamics with a sharp transition in the zero-shear viscosity data, demonstrating that grafting density strongly impacts the entanglement molar mass. The entanglement modulus (Ge) scales with inverse grafting density (ng) as Ge ∼ ng1.2 and Ge ∼ ng0 in accordance with scaling theory in the high and low grafting density limits, respectively. However, a sharp transition between these limiting behaviors occurs, which does not conform to existing theoretical models for graft polymers. A molecular interpretation based on thin fl...

84 citations


Cited by
More filters
01 May 1993
TL;DR: Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems.
Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

29,323 citations

01 Mar 1996
TL;DR: In this paper, a mean-field phase diagram for conformationally symmetric diblock melts using the standard Gaussian polymer model is presented, which traverses the weak- to strong-segregation regimes, is free of traditional approximations.
Abstract: A mean-field phase diagram for conformationally symmetric diblock melts using the standard Gaussian polymer model is presented. Our calculation, which traverses the weak- to strong-segregation regimes, is free of traditional approximations. Regions of stability are determined for disordered (DIS) melts and for ordered structures including lamellae (L), hexagonally packed cylinders (H), body-centered cubic spheres (QIm3m), close-packed spheres (CPS), and the bicontinuous cubic network with Ia3d symmetry (QIa3d). The CPS phase exists in narrow regions along the order−disorder transition for χN ≥ 17.67. Results suggest that the QIa3d phase is not stable above χN ∼ 60. Along the L/QIa3d phase boundaries, a hexagonally perforated lamellar (HPL) phase is found to be nearly stable. Our results for the bicontinuous Pn3m cubic (QPn3m) phase, known as the OBDD, indicate that it is an unstable structure in diblock melts. Earlier approximation schemes used to examine mean-field behavior are reviewed, and compa...

1,256 citations

Journal ArticleDOI
TL;DR: In this article, the authors parse the vast literature to examine the forefront of the field of block polymers and identify exciting themes and challenging opportunities that portend a bracing future trajectory.
Abstract: Block polymers have undergone extraordinary evolution since their inception more than 60 years ago, maturing from simple surfactants to an expansive class of macromolecules encoded with exquisite attributes. Contemporary synthetic accessibility coupled with facile characterization and rigorous theoretical advances have conspired to continuously generate fundamental insights and enabling concepts that target applications spanning chemistry, biology, physics, and engineering. Here, we parse the vast literature to examine the forefront of the field and identify exciting themes and challenging opportunities that portend a bracing future trajectory. This Perspective celebrates the visionary role played by Macromolecules in advancing our understanding of this remarkable class of materials.

542 citations

Journal ArticleDOI
TL;DR: In this paper, the design of polymeric materials for desired mechanical properties, increased ionic and electronic conductivity and specific chemical interactions is discussed, with a specific focus on silicon, lithium-metal and sulfur battery chemistries.
Abstract: Electrochemical energy storage devices are becoming increasingly important to our global society, and polymer materials are key components of these devices. As the demand for high-energy density devices increases, innovative new materials that build on the fundamental understanding of physical phenomena and structure–property relationships will be required to enable high-capacity next-generation battery chemistries. In this Review, we discuss core polymer science principles that are used to facilitate progress in battery materials development. Specifically, we discuss the design of polymeric materials for desired mechanical properties, increased ionic and electronic conductivity and specific chemical interactions. We also discuss how polymer materials have been designed to create stable artificial interfaces and improve battery safety. The focus is on these design principles applied to advanced silicon, lithium-metal and sulfur battery chemistries. Polymers are ubiquitous in batteries as binders, separators, electrolytes and electrode coatings. In this Review, we discuss the principles underlying the design of polymers with advanced functionalities to enable progress in battery engineering, with a specific focus on silicon, lithium-metal and sulfur battery chemistries.

494 citations

Journal ArticleDOI
TL;DR: Ruthenium-based olefin metathesis catalysts, known for their functional group tolerance and broad applicability in organic synthesis and polymer science, continue to evolve as an enabling technology in these areas.
Abstract: Ruthenium-based olefin metathesis catalysts, known for their functional group tolerance and broad applicability in organic synthesis and polymer science, continue to evolve as an enabling technology in these areas. A discussion of recent mechanistic investigations is followed by an overview of selected applications.

417 citations