Alireza Nouri

Bio: Alireza Nouri is an academic researcher from Amirkabir University of Technology. The author has contributed to research in topics: Ball mill & Powder metallurgy. The author has an hindex of 19, co-authored 38 publications receiving 1076 citations. Previous affiliations of Alireza Nouri include RMIT University & University of Toronto.

Biomimetic Porous Titanium Scaffolds for Orthopedic and Dental Applications

Abstract: The development of artificial organs and implants for replacement of injured and diseased hard tissues such as bones, teeth and joints is highly desired in orthopedic surgery. Orthopedic prostheses have shown an enormous success in restoring the function and offering high quality of life to millions of individuals each year. Therefore, it is pertinent for an engineer to set out new approaches to restore the normal function of impaired hard tissues. Over the last few decades, a large number of metals and applied materials have been developed with significant improvement in various properties in a wide range of medical applications. However, the traditional metallic bone implants are dense and often suffer from the problems of adverse reaction, biomechanical mismatch and lack of adequate space for new bone tissue to grow into the implant. Scientific advancements have been made to fabricate porous scaffolds that mimic the architecture and mechanical properties of natural bone. The porous structure provides necessary framework for the bone cells to grow into the pores and integrate with host tissue, known as osteointegration. The appropriate mechanical properties, in particular, the low elastic modulus mimicking that of bone may minimize or eliminate the stress-shielding problem. Another important approach is to develop biocompatible and corrosion resistant metallic materials to diminish or avoid adverse body reaction. Although numerous types of materials can be involved in this fast developing field, some of them are more widely used in medical applications. Amongst them, titanium and some of its alloys provide many advantages such as excellent biocompatibility, high strength-to-weight ratio, lower elastic modulus, and superior corrosion resistance, required for dental and orthopedic implants. Alloying elements, i.e. Zr, Nb, Ta, Sn, Mo and Si, would lead to superior improvement in properties of titanium for biomedical applications. New processes have recently been developed to synthesize biomimetic porous titanium scaffolds for bone replacement through powder metallurgy. In particular, the space holder sintering method is capable of adjusting the pore shape, the porosity, and the pore size distribution, notably within the range of 200 to 500 m as required for osteoconductive applications. The present chapter provides a review on the characteristics of porous metal scaffolds used as bone replacement as well as fabrication processes of porous titanium (Ti) scaffolds through a space holder sintering method. Finally, surface modification of the resultant porous Ti scaffolds through a biomimetic chemical technique is reviewed, in order to ensure that the surfaces of the scaffolds fulfill the requirements for biomedical applications.

Effect of surface roughness of Ti, Zr, and TiZr on apatite precipitation from simulated body fluid.

Abstract: Some of the critical properties for a successful orthopedic or dental implant material are its biocompatibility and bioactivity. Pure titanium (Ti) and zirconium (Zr) are widely accepted as biocompatible metals, due to their non-toxicity. While the bioactivity of Ti and some Ti alloys has been extensively investigated, there is still insufficient data for Zr and titanium-zirconium (TiZr) alloys. In the present study, the bioactivity, that is, the apatite forming ability on the alkali and heat treated surfaces of Ti, Zr, and TiZr alloy in simulated body fluid (SBF), was studied. In particular, the effect of the surface roughness characteristics on the bioactivity was evaluated for the first time. The results indicate that the pretreated Ti, Zr and TiZr alloy could form apatite coating on their surfaces. It should be noted that the surface roughness also critically affected the bioactivity of these pretreated metallic samples. A surface morphology with an average roughness of approximately 0.6 microm led to the fastest apatite formation on the metal surfaces. This apatite layer on the metal surface is expected to bond to the surrounding bones directly after implantation.

Surfactants in Mechanical Alloying/Milling: A Catch-22 Situation

Abstract: Mechanical alloying/milling technique is characterized by the repeated welding and fracturing of powder particles in a high-energy ball mill, which often results in excessive cold welding and agglomeration of ductile particles. To achieve the critical balance between cold welding and fracturing, the surface of the deforming particles is modified by introducing a suitable organic material, called surfactant or process control agent (PCA). However, the use of surfactants is self-contradictory by nature and requires further consideration of the milling variables and type/amount of surfactant. The current article provides a practical approach to the promises and challenges associated with surfactants in mechanical alloying/milling. An attempt has been made to address the most crucial aspects correlated with surfactants, including contamination, the morphology and size of powder particles, formation of alloy and microstructural evolution, and powder yield, as well as the physico-mechanical properties, such as ...

Additive manufacturing

Abstract: Propulsion system development requires new, more affordable manufacturing techniques and technologies in a constrained budget environment, while future in-space applications will require in-space manufacturing and assembly of parts and systems. Marshall is advancing cuttingedge commercial capabilities in additive and digital manufacturing and applying them to aerospace challenges. The Center is developing the standards by which new manufacturing processes and parts will be tested and qualified. Rapidly evolving digital tools, such as additive manufacturing, are the leading edge of a revolution in the design and manufacture of space systems that enables rapid prototyping and reduces production times. Marshall has unique expertise in leveraging new digital tools, 3D printing, and other advanced manufacturing technologies and applying them to propulsion systems design and other aerospace materials to meet NASA mission and industry needs. Marshall is helping establish the standards and qualifications “from art to part” for the use of these advanced techniques and the parts produced using them in aerospace or elsewhere in the U.S. industrial base.

Current Progress in Gene Delivery Technology Based on Chemical Methods and Nano-carriers

Abstract: Gene transfer methods are promising in the field of gene therapy. Current methods for gene transfer include three major groups: viral, physical and chemical methods. This review mainly summarizes development of several types of chemical methods for gene transfer in vitro and in vivo by means of nano-carriers like; calcium phosphates, lipids, and cationic polymers including chitosan, polyethylenimine, polyamidoamine dendrimers, and poly(lactide-co-glycolide). This review also briefly introduces applications of these chemical methods for gene delivery.

Progress in Materials Science

Abstract: Progress in Materials Science Vol. 9. Edited by Dr. Bruce Chalmers. (Incorporating “Progress in Metal Physics”, Volumes 1–8.) Pp. 389. (London and New York: Pergamon Press, 1961.) 120s. net; 20 dollars.