Allen Bowden

Bio: Allen Bowden is an academic researcher from Open University. The author has contributed to research in topics: Lanthanide & Montmorillonite. The author has an hindex of 13, co-authored 19 publications receiving 851 citations. Previous affiliations of Allen Bowden include University College London & University of Birmingham.

A critical appraisal of polymer-clay nanocomposites.

Abstract: The surge of interest in and scientific publications on the structure and properties of nanocomposites has made it rather difficult for the novice to comprehend the physical structure of these new materials and the relationship between their properties and those of the conventional range of composite materials. Some of the questions that arise are: How should the reinforcement volume fraction be calculated? How can the clay gallery contents be assessed? How can the ratio of intercalate to exfoliate be found? Does polymerization occur in the clay galleries? How is the crystallinity of semi-crystalline polymers affected by intercalation? What role do the mobilities of adsorbed molecules and clay platelets have? How much information can conventional X-ray diffraction offer? What is the thermodynamic driving force for intercalation and exfoliation? What is the elastic modulus of clay platelets? The growth of computer simulation techniques applied to clay materials has been rapid, with insight gained into the structure, dynamics and reactivity of polymer–clay systems. However these techniques operate on the basis of approximations, which may not be clear to the non-specialist. This critical review attempts to assess these issues from the viewpoint of traditional composites thereby embedding these new materials in a wider context to which conventional composite theory can be applied. (210 references)

Pro-inflammatory effects of e-cigarette vapour condensate on human alveolar macrophages.

Abstract: Objective Vaping may increase the cytotoxic effects of e-cigarette liquid (ECL). We compared the effect of unvaped ECL to e-cigarette vapour condensate (ECVC) on alveolar macrophage (AM) function. Methods AMs were treated with ECVC and nicotine-free ECVC (nfECVC). AM viability, apoptosis, necrosis, cytokine, chemokine and protease release, reactive oxygen species (ROS) release and bacterial phagocytosis were assessed. Results Macrophage culture with ECL or ECVC resulted in a dose-dependent reduction in cell viability. ECVC was cytotoxic at lower concentrations than ECL and resulted in increased apoptosis and necrosis. nfECVC resulted in less cytotoxicity and apoptosis. Exposure of AMs to a sub-lethal 0.5% ECVC/nfECVC increased ROS production approximately 50-fold and significantly inhibited phagocytosis. Pan and class one isoform phosphoinositide 3 kinase inhibitors partially inhibited the effects of ECVC/nfECVC on macrophage viability and apoptosis. Secretion of interleukin 6, tumour necrosis factor α, CXCL-8, monocyte chemoattractant protein 1 and matrix metalloproteinase 9 was significantly increased following ECVC challenge. Treatment with the anti-oxidant N-acetyl-cysteine (NAC) ameliorated the cytotoxic effects of ECVC/nfECVC to levels not significantly different from baseline and restored phagocytic function. Conclusions ECVC is significantly more toxic to AMs than non-vaped ECL. Excessive production of ROS, inflammatory cytokines and chemokines induced by e-cigarette vapour may induce an inflammatory state in AMs within the lung that is partly dependent on nicotine. Inhibition of phagocytosis also suggests users may suffer from impaired bacterial clearance. While further research is needed to fully understand the effects of e-cigarette exposure in humans in vivo, we caution against the widely held opinion that e-cigarettes are safe.

Interlayer Structure and Bonding in Nonswelling Primary Amine Intercalated Clays

Abstract: Preparation of industrially useful clay-polymer nanocomposite materials often requires the dispersal of clay particles within a polymer matrix. The degree to which the clay particles may be dispersed has an effect on the resultant properties of the material, and the clay is often rendered organophilic using alkylammonium species to facilitate incorporation of polymer. The use of a low molecular weight poly(propylene) oxide diamine is investigated as a reagent for controlling the separation between layers in smectite clays and therefore the extent to which the clay tactoid may be dispersed. The arrangement and interactions of the amine species in the interlayer region are investigated through analysis by both experimental methods and computer simulation, which gives insight into coordination mechanisms within the organoclay. Infrared spectroscopy indicates the presence of extensive hydrogen bonding within the amine-clay interlayer. Some of the amine species were found to intercalate in a nonprotonated state, resulting in strong hydrogen-bonding interactions between amine and ammonium groups. Large-scale classical molecular dynamics simulation shows that the amine groups do not interact strongly with the clay sheets, in contradistinction to ammonium groups. The effect of simulation cell size was considered, and in the limit of zero finite size effects, physically realistic undulations are observed within the individual clay sheets.

Combined experimental and theoretical investigations of clay–polymer nanocomposites: intercalation of single bifunctional organic compounds in Na+-montmorillonite and Na+-hectorite clays for the design of new materials

Abstract: This paper reports a study of the intercalation of single bifunctional poly(ethylene oxide)- and poly(propylene oxide)-based compounds, with and without modified end groups, in Na+-montmorillonite and Na+-hectorite clays as the starting point for the design of new non-exfoliated clay–polymer materials The terminal functional groups employed on intercalated poly(ethylene oxide) and poly(propylene oxide) include acrylate, methacrylate and amine functions For some of the monomers, in situ polymerisation was observed Attempts to rationalise these behaviours are made on the basis of atomistic grand canonical Monte Carlo, canonical Monte Carlo and molecular dynamics simulations Poly(ethylene oxide) diacrylate monomers, for which in situ polymerisation was observed, interact more strongly with the Na+-montmorillonite clay layers than the other monomers

Intercalation and in situ polymerization of poly(alkylene oxide) derivatives within M+-montmorillonite (M = Li, Na, K)

Abstract: We have synthesized a range of montmorillonite-based clay–polymer nanocomposites by intercalation of a variety of functionalized molecules having poly(ethylene oxide) and poly(propylene oxide) backbones from aqueous solution using a facile batch process. We focus on montmorillonite clays charge-balanced by cation exchange with Li+ and K+, but otherwise unmodified. Analysis by X-ray diffraction and thermal methods showed that intercalation occurred in all cases and that the composites displayed a range of interlayer spacings and organic content, from monolayer arrangements to pseudo-trilayer arrangements. Intercalated K+-montmorillonites had a propensity to exfoliate, in marked contrast to their resistance to swelling by water. Large-scale molecular dynamics simulations of selected composites were used to elucidate possible interlayer arrangements of the composites. Materials property studies showed that these clay–polymer composites had significantly increased Young's moduli compared to the unfilled polymer.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Applications of advanced hybrid organic–inorganic nanomaterials: from laboratory to market

Abstract: Today cross-cutting approaches, where molecular engineering and clever processing are synergistically coupled, allow the chemist to tailor complex hybrid systems of various shapes with perfect mastery at different size scales, composition, functionality, and morphology. Hybrid materials with organic–inorganic or bio–inorganic character represent not only a new field of basic research but also, via their remarkable new properties and multifunctional nature, hybrids offer prospects for many new applications in extremely diverse fields. The description and discussion of the major applications of hybrid inorganic–organic (or biologic) materials are the major topic of this critical review. Indeed, today the very large set of accessible hybrid materials span a wide spectrum of properties which yield the emergence of innovative industrial applications in various domains such as optics, micro-electronics, transportation, health, energy, housing, and the environment among others (526 references).

Polyurethane types, synthesis and applications – a review

Abstract: Polyurethanes (PUs) are a class of versatile materials with great potential for use in different applications, especially based on their structure–property relationships. Their specific mechanical, physical, biological, and chemical properties are attracting significant research attention to tailoring PUs for use in different applications. Enhancement of the properties and performance of PU-based materials may be achieved through changes to the production process or the raw materials used in their fabrication or via the use of advanced characterization techniques. Clearly, modification of the raw materials and production process through proper methods can produce PUs that are suitable for varied specific applications. The present study aims to shed light on the chemistry, types, and synthesis of different kinds of PUs. Some of the important research studies relating to PUs, including their synthesis method, characterization techniques, and research findings, are comprehensively discussed. Herein, recent advances in new types of PUs and their synthesis for various applications are also presented. Furthermore, information is provided on the environmental friendliness of the PUs, with a specific emphasis on their recyclability and recoverability.