Alun S. Vaughan

Bio: Alun S. Vaughan is an academic researcher from University of Southampton. The author has contributed to research in topics: Dielectric & Epoxy. The author has an hindex of 35, co-authored 339 publications receiving 4633 citations. Previous affiliations of Alun S. Vaughan include National Grid plc & Applied Science Private University.

Review of high voltage direct current cables

Abstract: Increased renewable energy integration and international power trades have led to the construction and development of new HVDC transmission systems. HVDC cables, in particular, play an important role in undersea power transmission and offshore renewable energy integration having lower losses and higher reliability. In this paper, the current commercial feasibility of HVDC cables and the development of different types of HVDC cables and accessories are reviewed. The non-uniform electric field distribution caused by the applied voltage, temperature dependent conductivity, and space charge accumulation is briefly discussed. Current research in HVDC cable for higher operation voltage level and larger power capacity is also reviewed with specific focus on the methodologies of space charge suppression for XLPE extruded cables.

Dielectric properties of XLPE/Sio2 nanocomposites based on CIGRE WG D1.24 cooperative test results

Abstract: A comprehensive experimental investigation of XLPE and its nanocomposite with fumed silica (SiO2) has been performed by CIGRE Working Group D1.24, in cooperative tests conducted by a number of members; covering materials characterization, real and imaginary permittivity, dc conductivity, space charge formation, dielectric breakdown strength, and partial discharge resistance. The research is unique, since all test samples were prepared by one source, and then evaluated by several expert members and their research organizations. The XLPE used for preparation of the nanocomposites was a standard commercial material used for extruded power cables. The improved XLPE samples, based on nanocomposite formulations with fumed silica, were prepared specifically for this study. Results of the different investigations are summarized in each section; conclusions are given. Overall, several important improvements over unfilled XLPE are confirmed, which augur well for future potential application in the field of extruded HV and EHV cables. Some differences/discrepancies in the data of participants are thought to be the result of instrumental and individual experimental technique differences.

An investigation of the potential of polypropylene and its blends for use in recyclable high voltage cable insulation systems

Abstract: Most modern extruded high voltage cables employ cross-linked polyethylene (XLPE) as the insulation material. XLPE has excellent thermo-mechanical properties, is relatively cheap and has a low dielectric loss, which make it an ideal material for this application. Unfortunately, XLPE is not easily recycled at the end of its lifetime leading to questions concerning its long-term sustainability. A previous investigation in this series considered the potential of a range of ethylene-based systems to provide suitable recyclable alternatives to XLPE. Whilst blending could allow systems having similar thermo-mechanical and electrical properties to XLPE to be designed, it was not possible to obtain better performance than XLPE using these systems. Polypropylene offers, potentially, a route to improved insulation systems by virtue of its higher melting point and excellent dielectric properties. However, traditional isotactic polypropylenes have always had the problem of being too brittle for inclusion into practical cable designs. Recently a broad range of propylene co-polymers having improved ductility have become available, which may prove more suitable. The current study compares traditional isotactic and syndiotactic polypropylenes to a range of commercially available propylene co-polymers and focuses on their morphology, thermal, thermo-mechanical and electrical properties. These parameters were then taken together to identify the most suitable candidate materials for future cable applications. The use of blending as a means to further optimise the various material properties was also explored.

Structure–property relationships in polyethylene blends: the effect of morphology on electrical breakdown strength

Abstract: Blends of linear and branched polyethylene were prepared covering the composition range 1–20% linear polyethylene, and three thermal treatments were subsequently chosen to produce a range of different morphologies. Isothermal crystallization at 124 °C gives rise to compact linear inclusions within a matrix of branched polyethylene, isothermal crystallization at 115 °C produces an open, banded spherulitic morphology and, finally, quenching leads to a continuous spherulitic texture. Ramp testing was then employed to investigate the effect of morphology on electrical strength. It was found that the electrical strength of the blend depends primarily on the morphology and that, by optimizing thermal treatment and linear polyethylene content, substantial improvements in properties can be obtained.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Phd by thesis

Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These