scispace - formally typeset
Search or ask a question
Author

Alwin Rogier Martijn Verschueren

Bio: Alwin Rogier Martijn Verschueren is an academic researcher from Philips. The author has contributed to research in topics: Liquid crystal & Ion. The author has an hindex of 17, co-authored 53 publications receiving 6197 citations. Previous affiliations of Alwin Rogier Martijn Verschueren include Delft University of Technology & Ghent University.


Papers
More filters
Journal ArticleDOI
01 May 1998-Nature
TL;DR: In this paper, the fabrication of a three-terminal switching device at the level of a single molecule represents an important step towards molecular electronics and has attracted much interest, particularly because it could lead to new miniaturization strategies in the electronics and computer industry.
Abstract: The use of individual molecules as functional electronic devices was first proposed in the 1970s (ref 1) Since then, molecular electronics2,3 has attracted much interest, particularly because it could lead to conceptually new miniaturization strategies in the electronics and computer industry The realization of single-molecule devices has remained challenging, largely owing to difficulties in achieving electrical contact to individual molecules Recent advances in nanotechnology, however, have resulted in electrical measurements on single molecules4,5,6,7 Here we report the fabrication of a field-effect transistor—a three-terminal switching device—that consists of one semiconducting8,9,10 single-wall carbon nanotube11,12 connected to two metal electrodes By applying a voltage to a gate electrode, the nanotube can be switched from a conducting to an insulating state We have previously reported5 similar behaviour for a metallic single-wall carbon nanotube operated at extremely low temperatures The present device, in contrast, operates at room temperature, thereby meeting an important requirement for potential practical applications Electrical measurements on the nanotube transistor indicate that its operation characteristics can be qualitatively described by the semiclassical band-bending models currently used for traditional semiconductor devices The fabrication of the three-terminal switching device at the level of a single molecule represents an important step towards molecular electronics

5,258 citations

Journal ArticleDOI
TL;DR: In this paper, single-wall carbon nanotubes over multiple (up to seven) Pt nanoelectrodes are realized and two-probe and fourprobe transport measurements between adjacent pairs of electrodes show similar but not identical single-electron Coulomb charging signatures at low temperatures.
Abstract: Deposition of individual single-wall carbon nanotubes over multiple (up to seven) Pt nanoelectrodes is realized. Two-probe and four-probe transport measurements between adjacent pairs of electrodes show similar but not identical single-electron Coulomb charging signatures at low temperatures. The observations indicate that nanotubes can behave as a chain of quantum wires connected in series. We argue that the local barriers separating these islands may be caused by bending of the tube near the edges of electrodes.

259 citations

Journal ArticleDOI
15 Mar 1998-EPL
TL;DR: In this article, a one-dimensional theory of the scattering of electrons by twistons is presented which predicts an intrinsic resistivity proportional to the absolute temperature, and experiments of the temperature dependence of the resistivity are reported and compared with the predictions of the twiston theory.
Abstract: Samples of single-wall carbon nanotubes containing tubes with an armchair wrapping have been produced and exhibit metallic behavior with an intrinsic resistivity which increases approximately linearly with temperature over a wide temperature range. Here we study the coupling of the conduction electrons to long-wavelength torsional shape fluctuations, or twistons. A one-dimensional theory of the scattering of electrons by twistons is presented which predicts an intrinsic resistivity proportional to the absolute temperature. Experimental measurements of the temperature dependence of the resistivity are reported and compared with the predictions of the twiston theory.

196 citations

Journal ArticleDOI
TL;DR: It is concluded that the quasi steady-state current results from a bulk disproportionation reaction between neutral micelles that generates charged micells and therefore this technique allows for direct quantification of the reaction kinetics from which the charged species originate.

81 citations

Journal ArticleDOI
TL;DR: In this paper, an S-shaped current versus voltage curve was found to indicate the presence of ion generation and recombination in the liquid crystal bulk, and the compensation of the electrical field and the saturation current were related to the alignment layer thickness and to the temperature.
Abstract: Leakage current measurements are performed on prototype cells revealing an S-shaped current versus voltage curve. This result indicates the presence of ion generation and recombination in the liquid crystal bulk. The compensation of the electrical field and the saturation current are related to the alignment layer thickness and to the temperature. The slope of the I–V curve corresponds with Onsager's dependency of the ion generation. The time dependency of the current is modelled by an empirical fitting of the generation constant. A complete theoretical model is thus presented. The simulation fits with the measurements and gives a profound insight in the long term ion transport in nematic liquid crystal displays.

54 citations


Cited by
More filters
Journal ArticleDOI
02 Aug 2002-Science
TL;DR: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects.
Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.

9,693 citations

Journal ArticleDOI
18 Nov 1999-Nature
TL;DR: In this article, an organic dicarboxylate linker is used in a reaction that gives supertetrahedron clusters when capped with monocarboxyates.
Abstract: Open metal–organic frameworks are widely regarded as promising materials for applications1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 in catalysis, separation, gas storage and molecular recognition. Compared to conventionally used microporous inorganic materials such as zeolites, these organic structures have the potential for more flexible rational design, through control of the architecture and functionalization of the pores. So far, the inability of these open frameworks to support permanent porosity and to avoid collapsing in the absence of guest molecules, such as solvents, has hindered further progress in the field14,15. Here we report the synthesis of a metal–organic framework which remains crystalline, as evidenced by X-ray single-crystal analyses, and stable when fully desolvated and when heated up to 300?°C. This synthesis is achieved by borrowing ideas from metal carboxylate cluster chemistry, where an organic dicarboxylate linker is used in a reaction that gives supertetrahedron clusters when capped with monocarboxylates. The rigid and divergent character of the added linker allows the articulation of the clusters into a three-dimensional framework resulting in a structure with higher apparent surface area and pore volume than most porous crystalline zeolites. This simple and potentially universal design strategy is currently being pursued in the synthesis of new phases and composites, and for gas-storage applications.

6,778 citations

Journal ArticleDOI
28 Jan 2000-Science
TL;DR: The nanotubes sensors exhibit a fast response and a substantially higher sensitivity than that of existing solid-state sensors at room temperature and the mechanisms of molecular sensing with nanotube molecular wires are investigated.
Abstract: Chemical sensors based on individual single-walled carbon nanotubes (SWNTs) are demonstrated. Upon exposure to gaseous molecules such as NO 2 or NH 3 , the electrical resistance of a semiconducting SWNT is found to dramatically increase or decrease. This serves as the basis for nanotube molecular sensors. The nanotube sensors exhibit a fast response and a substantially higher sensitivity than that of existing solid-state sensors at room temperature. Sensor reversibility is achieved by slow recovery under ambient conditions or by heating to high temperatures. The interactions between molecular species and SWNTs and the mechanisms of molecular sensing with nanotube molecular wires are investigated.

5,908 citations

Journal ArticleDOI
17 Aug 2001-Science
TL;DR: The small size and capability of these semiconductor nanowires for sensitive, label-free, real-time detection of a wide range of chemical and biological species could be exploited in array-based screening and in vivo diagnostics.
Abstract: Boron-doped silicon nanowires (SiNWs) were used to create highly sensitive, real-time electrically based sensors for biological and chemical species. Amine- and oxide-functionalized SiNWs exhibit pH-dependent conductance that was linear over a large dynamic range and could be understood in terms of the change in surface charge during protonation and deprotonation. Biotin-modified SiNWs were used to detect streptavidin down to at least a picomolar concentration range. In addition, antigen-functionalized SiNWs show reversible antibody binding and concentration-dependent detection in real time. Lastly, detection of the reversible binding of the metabolic indicator Ca2+ was demonstrated. The small size and capability of these semiconductor nanowires for sensitive, label-free, real-time detection of a wide range of chemical and biological species could be exploited in array-based screening and in vivo diagnostics.

5,841 citations

Journal ArticleDOI
01 May 1998-Nature
TL;DR: In this paper, the fabrication of a three-terminal switching device at the level of a single molecule represents an important step towards molecular electronics and has attracted much interest, particularly because it could lead to new miniaturization strategies in the electronics and computer industry.
Abstract: The use of individual molecules as functional electronic devices was first proposed in the 1970s (ref 1) Since then, molecular electronics2,3 has attracted much interest, particularly because it could lead to conceptually new miniaturization strategies in the electronics and computer industry The realization of single-molecule devices has remained challenging, largely owing to difficulties in achieving electrical contact to individual molecules Recent advances in nanotechnology, however, have resulted in electrical measurements on single molecules4,5,6,7 Here we report the fabrication of a field-effect transistor—a three-terminal switching device—that consists of one semiconducting8,9,10 single-wall carbon nanotube11,12 connected to two metal electrodes By applying a voltage to a gate electrode, the nanotube can be switched from a conducting to an insulating state We have previously reported5 similar behaviour for a metallic single-wall carbon nanotube operated at extremely low temperatures The present device, in contrast, operates at room temperature, thereby meeting an important requirement for potential practical applications Electrical measurements on the nanotube transistor indicate that its operation characteristics can be qualitatively described by the semiclassical band-bending models currently used for traditional semiconductor devices The fabrication of the three-terminal switching device at the level of a single molecule represents an important step towards molecular electronics

5,258 citations