Multifunctional lignin-based nanocomposites and nanohybrids

Plastic waste, which is one of the major sources of pollution in the landfills and oceans, has raised global concern, primarily due to the huge production rate, high durability, and the lack of utilization of the available waste management techniques. Recycling methods are preferable to reduce the impact of plastic pollution to some extent. However, most of the recycling techniques are associated with different drawbacks, high cost and downgrading of product quality being among the notable ones. The sustainable option here is to upcycle the plastic waste to create high-value materials to compensate for the cost of production. Several upcycling techniques are constantly being investigated and explored, which is currently the only economical option to resolve the plastic waste issue. This Review provides a comprehensive insight on the promising chemical routes available for upcycling of the most widely used plastic and mixed plastic wastes. The challenges inherent to these processes, the recent advances, and the significant role of the science and research community in resolving these issues are further emphasized.

Strategic Approach Towards Plastic Waste Valorization: Challenges and Promising Chemical Upcycling Possibilities

Environmental impacts of polypropylene (PP) production and prospects of its recycling in the GCC region

Bearing in mind the aspiration of the world economy to create as complete a closed loop of raw materials and energy as possible, it is important to know the individual links in such a system and to systematise the knowledge. Polymer materials, especially poly(vinyl chloride) (PVC), are considered harmful to the environment by a large part of society. The work presents a literature review on mechanical and feedstock recycling. The advantages and disadvantages of various recycling methods and their development perspectives are presented. The general characteristics of PVC are also described. In conclusion, it is stated that there are currently high recycling possibilities for PVC material and that intensive work is underway on the development of feedstock recycling. Based on the literature review, it was found that PVC certainly meets the requirements for materials involved in the circular economy.

/pdf/a-brief-review-of-poly-vinyl-chloride-pvc-recycling-3rtqinvf.pdf

A Brief Review of Poly(Vinyl Chloride) (PVC) Recycling

Mildly processed chitin used in one-component drinking straws and single use materials: Strength, biodegradability and recyclability

Carbon footprint and embodied energy of PVC, PE, and PP piping: Perspective on environmental performance

The environmental impacts of the polypropylene (PP) manufacturing process are not fully understood in the Gulf Cooperation Council (GCC) region. There is a growing interest in assessing the environmental impacts of this highly demanded product, especially for the petrochemical industry sector. This research examines the environmental impacts of the polypropylene manufacturing process using a life cycle assessment (LCA) approach. Gabi software is selected to carry out this research study and quantify the risks associated with manufacturing one ton of polypropylene, chosen as the functional unit for this LCA study. This work has the following merits: (i) an evaluation of environmental impacts specific to GCC region based on actual plant data; (ii) the results in this work can be used to evaluate LCA impacts of PP based products; and (iii) emphasizing the importance of waste management in reducing environmental impacts. This study shows that the polypropylene manufacturing process releases numerous pollutants into the environment, as the gross CO2 emissions for the manufacturing process of PP in the plant located in the GCC region were estimated to be 1.58 kg CO2 eq./kg-PP. The manufacturing process of propylene has extremely high impacts on global warming potential, fossil resource depletion (1.722 kg Oil eq./kg-PP), human toxicity (0.077 kg 1,4-DB eq./kg-PP), acidification (0.0049 kg SO2 eq./kg-PP), and petrochemical oxidant formation (0.0042 kg NMVOC/kg-PP). Additionally, based on the results of this present research, this study proposes possible improvements and alternative solutions such as applying advanced technologies, clean energy, and safe recycling processes in the GCC that are environmentally friendly.

Amzan Alsabri

Papers

Carbon footprint and embodied energy of PVC, PE, and PP piping: Perspective on environmental performance

Life-Cycle Assessment of Polypropylene Production in the Gulf Cooperation Council (GCC) Region.