Andrea Chiappini

Bio: Andrea Chiappini is an academic researcher from fondazione bruno kessler. The author has contributed to research in topics: Photonic crystal & Photonics. The author has an hindex of 23, co-authored 129 publications receiving 1510 citations. Previous affiliations of Andrea Chiappini include University of Trento & CSELT.

Glass optical waveguides: a review of fabrication techniques

Abstract: Glasses, either pure or suitably doped, constitute an excellent material for the development of integrated optical circuits. A brief review is presented of the most widely used processes for the fabrication of passive and active glass waveguides. Brilliant prospects of glass-based platforms for the development of photonic integrated circuits are outlined.

Diamond photonics platform enabled by femtosecond laser writing.

Abstract: Diamond is a promising platform for sensing and quantum processing owing to the remarkable properties of the nitrogen-vacancy (NV) impurity. The electrons of the NV center, largely localized at the vacancy site, combine to form a spin triplet, which can be polarized with 532 nm laser light, even at room temperature. The NV’s states are isolated from environmental perturbations making their spin coherence comparable to trapped ions. An important breakthrough would be in connecting, using waveguides, multiple diamond NVs together optically. However, still lacking is an efficient photonic fabrication method for diamond akin to the photolithographic methods that have revolutionized silicon photonics. Here, we report the first demonstration of three dimensional buried optical waveguides in diamond, inscribed by focused femtosecond high repetition rate laser pulses. Within the waveguides, high quality NV properties are observed, making them promising for integrated magnetometer or quantum information systems on a diamond chip.

Design of photonic structures by sol-gel-derived silica nanospheres

Abstract: Sol–gel processing was used to obtain monosized silica spheres of 270 nm in diameter. Starting from these spheres, two different systems have been fabricated: (i) 3D Photonic Crystals by means of vertical deposition and evaporation-assisted sedimentation deposition methods; (ii) core-shell-like Er 3+ -activated silica spheres, where the core is the silica sphere and the shell is an Er 2 O 3 –SiO 2 coating. Optical and spectroscopic assessment, as well as morphological and structural characterization of the systems, have been performed.

Sol–gel-derived photonic structures: fabrication, assessment, and application

Abstract: Sol–gel is a handy, very flexible, and cheap method to fabricate, study, and apply innovative photonic structures. The possibility of starting from molecular precursors and elementary building blocks permits to tailor structures at the molecular level and to create new materials with enhanced performances. Of specific interest for the study of important physical effects as well as for application in light management are confined structures on the nano-micro scale as photonic crystal and planar waveguides. Activation by luminescent species and in particular by rare earth ions allows results in the integrated optics area covering application in sensing, biomedical diagnostic, telecommunication, lightning, and photon management. The present review is focused on some recent results obtained by the authors in Sol–gel photonics. The first part presents colloidal structures including single nano-micro spheres and photonic crystal structures. The second part of the review deals with amorphous and transparent glass–ceramic employed for the fabrication of confined structures in planar format. Some specific application are also reported to highlight the role of sol gel photonics in the development of high performance optical sensors, waveguide lasers, and nanostructured materials.

Integrated waveguides and deterministically positioned nitrogen vacancy centers in diamond created by femtosecond laser writing.

Abstract: Diamond’s nitrogen vacancy (NV) center is an optically active defect with long spin coherence times, showing great potential for both efficient nanoscale magnetometry and quantum information processing schemes. Recently, both the formation of buried 3D optical waveguides and high-quality single NVs in diamond were demonstrated using the versatile femtosecond laser-writing technique. However, until now, combining these technologies has been an outstanding challenge. In this Letter, we fabricate laser-written photonic waveguides in quantum grade diamond which are aligned to within micron resolution to single laser-written NVs, enabling an integrated platform providing deterministically positioned waveguide-coupled NVs. This fabrication technology opens the way toward on-chip optical routing of single photons between NVs and optically integrated spin-based sensing.

Photonic crystals

Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

Controlling the dynamics of spontaneous emission from quantum dots by photonic crystals

Abstract: Control of spontaneously emitted light lies at the heart of quantum optics. It is essential for diverse applications ranging from miniature lasers and light-emitting diodes, to single-photon sources for quantum information, and to solar energy harvesting. To explore such new quantum optics applications, a suitably tailored dielectric environment is required in which the vacuum fluctuations that control spontaneous emission can be manipulated. Photonic crystals provide such an environment: they strongly modify the vacuum fluctuations, causing the decay of emitted light to be accelerated or slowed down, to reveal unusual statistics, or to be completely inhibited in the ideal case of a photonic bandgap. Here we study spontaneous emission from semiconductor quantum dots embedded in inverse opal photonic crystals. We show that the spectral distribution and time-dependent decay of light emitted from excitons confined in the quantum dots are controlled by the host photonic crystal. Modified emission is observed over large frequency bandwidths of 10%, orders of magnitude larger than reported for resonant optical microcavities. Both inhibited and enhanced decay rates are observed depending on the optical emission frequency, and they are controlled by the crystals’ lattice parameter. Our experimental results provide a basis for all-solid-state dynamic control of optical quantum systems.

Whispering gallery mode sensors

Abstract: We present a comprehensive overview of sensor technology exploiting optical whispering gallery mode (WGM) resonances. After a short introduction we begin by detailing the fundamental principles and theory of WGMs in optical microcavities and the transduction mechanisms frequently employed for sensing purposes. Key recent theoretical contributions to the modeling and analysis of WGM systems are highlighted. Subsequently we review the state of the art of WGM sensors by outlining efforts made to date to improve current detection limits. Proposals in this vein are numerous and range, for example, from plasmonic enhancements and active cavities to hybrid optomechanical sensors, which are already working in the shot noise limited regime. In parallel to furthering WGM sensitivity, efforts to improve the time resolution are beginning to emerge. We therefore summarize the techniques being pursued in this vein. Ultimately WGM sensors aim for real-world applications, such as measurements of force and temperature, or alternatively gas and biosensing. Each such application is thus reviewed in turn, and important achievements are discussed. Finally, we adopt a more forward-looking perspective and discuss the outlook of WGM sensors within both a physical and biological context and consider how they may yet push the detection envelope further.

Spherical whispering‐gallery‐mode microresonators

Abstract: Whispering-gallery modes (WGM) on a spherical surface were first described by Lord Rayleigh at the beginning of the last century, but only after the invention of laser did they start to have some scientific relevance and only during the last two decades there has been a substantial move towards real devices and practical applications. WGM resonators have peculiar properties, the most notable being the potential of having an ultrahigh quality factor Q, which makes them very appealing both as laser cavities and as extremely sensitive sensors. Among the different types of WGM resonators, the microspherical ones represent a very important category, due to their simplicity, easy fabrication, and very high quality. In this review we provide a description of their fundamental properties and we summarize recent works on their application as filters, sensors and lasers.

Micromachining of photonic devices by femtosecond laser pulses

Abstract: In this paper we review the micromachining of photonic devices in several materials by means of ultrashort laser pulses. The physical mechanisms underlying the refractive index modification and the different laser systems used to induce such modification are discussed. A thorough review of the photonic devices demonstrated with the femtosecond laser microfabrication technique is presented. In particular, this paper is focused on photonic devices based on optical waveguides. The devices are organized into two categories: passive and active devices. In the former category power splitters, directional couplers, interferometers and Bragg gratings are reviewed, while in the latter amplifiers and lasers are discussed. Finally, conclusions and future perspectives of femtosecond laser micromachining in photonics are provided.