THE DESIGN AND ANALYSIS OF EXPERIMENTS. By Oscar Kempthorne. New York, John Wiley and Sons, Inc., 1952. 631 pp. $8.50. This book by a teacher of statistics (as well as a consultant for \"experimenters\") is a comprehensive study of the philosophical background for the statistical design of experiment. It is necessary to have some facility with algebraic notation and manipulation to be able to use the volume intelligently. The problems are presented from the theoretical point of view, without such practical examples as would be helpful for those not acquainted with mathematics. The mathematical justification for the techniques is given. As a somewhat advanced treatment of the design and analysis of experiments, this volume will be interesting and helpful for many who approach statistics theoretically as well as practically. With emphasis on the \"why,\" and with description given broadly, the author relates the subject matter to the general theory of statistics and to the general problem of experimental inference. MARGARET J. ROBERTSON

The Design and Analysis of Experiments

A description is provided of the software algorithms developed for the CMS tracker both for reconstructing charged-particle trajectories in proton-proton interactions and for using the resulting tracks to estimate the positions of the LHC luminous region and individual primary-interaction vertices. Despite the very hostile environment at the LHC, the performance obtained with these algorithms is found to be excellent. For tt events under typical 2011 pileup conditions, the average track-reconstruction efficiency for promptly-produced charged particles with transverse momenta of p_T > 0.9GeV is 94% for pseudorapidities of |η| < 0.9 and 85% for 0.9 < |η| < 2.5. The inefficiency is caused mainly by hadrons that undergo nuclear interactions in the tracker material. For isolated muons, the corresponding efficiencies are essentially 100%. For isolated muons of p_T = 100GeV emitted at |η| < 1.4, the resolutions are approximately 2.8% in p_T, and respectively, 10μm and 30μm in the transverse and longitudinal impact parameters. The position resolution achieved for reconstructed primary vertices that correspond to interesting pp collisions is 10–12μm in each of the three spatial dimensions. The tracking and vertexing software is fast and flexible, and easily adaptable to other functions, such as fast tracking for the trigger, or dedicated tracking for electrons that takes into account bremsstrahlung.

/pdf/description-and-performance-of-track-and-primary-vertex-2ro6qllys7.pdf

Description and performance of track and primary-vertex reconstruction with the CMS tracker

Failure modes and mechanisms of AlGaN/GaN high-electron-mobility transistors are reviewed. Data from three de-accelerated tests are presented, which demonstrate a close correlation between failure modes and bias point. Maximum degradation was found in "semi-on" conditions, close to the maximum of hot-electron generation which was detected with the aid of electroluminescence (EL) measurements. This suggests a contribution of hot-electron effects to device degradation, at least at moderate drain bias (VDS 30-50 V), new failure mechanisms are triggered, which induce an increase of gate leakage current. The latter is possibly related with the inverse piezoelectric effect leading to defect generation due to strain relaxation, and/or to localized permanent breakdown of the AlGaN barrier layer. Results are compared with literature data throughout the text.

Reliability of GaN High-Electron-Mobility Transistors: State of the Art and Perspectives

Cancer of the breast

A harmonic oscillator topology displaying an improved phase noise performance is introduced in this paper. Exploiting the advantages yielded by operating the core transistors in class-C, a theoretical 3.9 dB phase noise improvement compared to the standard differential-pair LC-tank oscillator is achieved for the same current consumption. Further benefits derive from the natural rejection of the tail bias current noise, and from the absence of parasitic nodes sensitive to stray capacitances. Closed-form phase-noise equations obtained from a rigorous time-variant circuit analysis are presented, as well as a time-variant study of the stability of the oscillation amplitude, resulting in simple guidelines for a reliable design. Furthermore, the analysis of phase noise is extended to encompass a general harmonic oscillator, showing that all phase noise relations previously obtained for specific LC oscillator topologies are special cases of a very general and remarkably simple result.

Class-C Harmonic CMOS VCOs, With a General Result on Phase Noise

The APV25 is a 128-channel analogue pipeline chip for the readout of silicon microstrip detectors in the CMS tracker at the LHC. Each channel comprises a low noise amplifier, a 192-cell analogue pipeline and a deconvolution readout circuit. Output data are transmitted on a single differential current output via an analogue multiplexer. The chip is fabricated in a standard 0.25 μm CMOS process to take advantage of the radiation tolerance, lower noise and power, and high circuit density. Experimental characterisation of this circuit shows full functionality and good performance both in pre- and post-irradiation (20 Mrad) conditions. The measured noise is significantly reduced compared to earlier APV versions. A description of the design and results from measurements prior to irradiation are presented.

Design and results from the APV25, a deep sub-micron CMOS front-end chip for the CMS tracker

In this brief, we propose to use a transformer-based resonator to build a dual-mode oscillator, e.g., a system capable of oscillating at two different frequencies without recurring to switched inductors, switched capacitors, or varactors. The behavior of the resonator configured as a one-port and a two-port network is studied analytically, and the dependence of the quality factor on the design parameters is thoroughly explored. These results, combined with the use of traditional frequency tuning techniques, are applied to the design of a wide-band voltage-controlled oscillator (VCO) that covers the frequency range 3.6-7.8 GHz. The performance of the designed VCO, implemented in a digital 0.13-mum CMOS technology, has been studied by transistor-level and 2.5D electromagnetic simulation (Agilent Momentum). A typical phase noise performance at 1-MHz offset of -104 dBc/Hz has been predicted, while the power consumption ranges from 1 to 8 mW, depending on the VCO configuration

Transformer-Based Dual-Mode Voltage-Controlled Oscillators

The system design of an integrated microwave imaging radar for the diagnostic screening of breasts cancer is presented. A custom integrated circuit implemented in a 65-nm CMOS technology and a pair of patch antennas realized on a planar laminate are proposed as the basic module of the imaging antenna array. The radar operates on the broad frequency range from 2 to 16 GHz with a dynamic range of 107 dB. Imaging experiments carried out on a realistic breast phantom show that the system is capable of detecting tumor targets with a resolution of 3 mm.

An Integrated Microwave Imaging Radar With Planar Antennas for Breast Cancer Detection

A 0.13-mu m CMOS fourth-order notch filter for the rejection of the 5-6 GHz interference in UWB front-ends is reported. The filter is integrated into an analog front-end for Mode #1 UWB. A thorough analysis based on a simplified model of the filter is carried out. An algorithm for the automatic tuning and calibration of the filter is also discussed and demonstrated. Two versions of the circuit are designed and fabricated: the first comprises a low-noise amplifier and the filter, and the second expands it to a complete front-end. In the latter version the filter was also redesigned. The filter provides more than 35 dB of attenuation and has a tuning range of 900 MHz, adding less than 30% power consumption to the LNA. The out-of-band IIP3 (higher than -13.2 dBm with the filter off) takes a 9-dB advantage from the filter and the compression of the gain due to the out-of-band blocker is reduced by at least 6 dB in the complete front-end. The conversion gain of the front-end is 25 dB per channel, its average noise figure is lower than 6.2 dB, and its in-band 1-dB compression point is higher than - 30 dBm at a power consumption of 32 mW.

Analysis and Design of an Integrated Notch Filter for the Rejection of Interference in UWB Systems

A fully integrated differential low-power low-noise amplifier (LNA) for ultrawideband (UWB) systems operating in the 3-5-GHz frequency range is presented. A two-section LC ladder input network is exploited to achieve excellent input match in a wideband fashion and to optimize the noise performance. Prototypes fabricated in a digital 0.13-mum complementary metal oxide semiconductor technology show the following performance: 9.5-dB peak power gain, 3.5-dB minimum noise figure, -6-dBm input-referred 1-dB compression point, and -0.8-dBm input-referred third-order intercept point, while drawing 11mA from a 1.5-V supply. The realized LNA is compared with previously reported LNAs tailored for the same frequency range

Andrea Neviani

Papers

Design and results from the APV25, a deep sub-micron CMOS front-end chip for the CMS tracker

Transformer-Based Dual-Mode Voltage-Controlled Oscillators

An Integrated Microwave Imaging Radar With Planar Antennas for Breast Cancer Detection

Analysis and Design of an Integrated Notch Filter for the Rejection of Interference in UWB Systems

A fully integrated differential CMOS LNA for 3-5-GHz ultrawideband wireless receivers