Author
Andrew Hamnett
Other affiliations: Open University, University of Oxford, University of Strathclyde
Bio: Andrew Hamnett is an academic researcher from Newcastle University. The author has contributed to research in topics: Platinum & Electrochemistry. The author has an hindex of 40, co-authored 101 publications receiving 4993 citations. Previous affiliations of Andrew Hamnett include Open University & University of Oxford.
Topics: Platinum, Electrochemistry, Methanol, Catalysis, Photoelectrolysis
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this paper, a study of the core-electron X-ray photoelectron (X-p) spectra of the f0 compounds La2O3, LaMO3(M = Fe and Co), CeO2, and BaCeO3 is described.
Abstract: A study of the core-electron X-ray photoelectron (X-p.e.) spectra of the f0 compounds La2O3, LaMO3(M = Fe and Co), CeO2, and BaCeO3 is described. Results on the chelate species [La(tmhd)3] and [Ce(tmhd)4](tmhd = 2,2,6,6-tetramethylheptane-3,5-dionato) are included for comparison. Special precautions have been taken to ensure an optimal degree of surface purity of the samples. Satellite structure has been observed for the 4p, in addition to the 3d and 4d, signals in both the lanthanum(III) and cerium(IV) compounds. These satellites arc discussed in terms of coexcitations of the charge-transfer type, principally O 2p→ metal 4f transitions. In the cerium(IV) oxides the satellites are apparently due to energy-gain (representing ‘ shake-down ’) rather than energy-loss (shake-up) processes.
841 citations
••
TL;DR: In this paper, an extensive study of the surface and bulk properties of both single-crystal and polycrystalline Fe2O3 is reported surface pretreatment is found to have a major effect on the photoelectrochemical properties Even in properly treated samples, however, the photocurrent onset is delayed due to the small value of the faradaic rate constant for the oxidation of water.
Abstract: Iron(III) oxide has been extensively studied as a possible n-type semiconductor for use in solar photoelectrolysis cells However, its properties have remained curiously elusive; even such fundamental properties as bandgap and flat-band potential are still controversial, and this uncertainty has hindered any rational evaluation of the use of the material in solar cells In this paper, an extensive study of the surface and bulk properties of both single-crystal and polycrystalline Fe2O3 is reported Surface pretreatment is found to have a major effect on the photoelectrochemical properties Even in properly treated samples, however, the photocurrent onset is found to be delayed due to the small value of the faradaic rate constant for the oxidation of water, and a semi-quantitative treatment of this case is provided Improper surface treatment is shown to lead to a substantial conversion of the surface of Fe2O3 to Fe3O4; this introduces a large fraction of recombination sites at the surface that not only delay dc photocurrent onset to very anodic potentials but also reduce the observed efficiency to remarkably low values
458 citations
••
TL;DR: In this article, the ion exchange properties, densification under cold pressing, and protonic conduction are shown to have general application to other ion exchange materials, such as H3O+ ions.
193 citations
••
TL;DR: In this paper, a novel Pt + Ru electrode material is shown to be highly active for the direct electro-oxidation of methanol in H2SO4 solutions and to show very little tendency to poison.
182 citations
••
TL;DR: In this paper, a single-crystal n-type TiO2 electrode, chemically modified by the attachment of a monolayer of a derivative of [Ru(BIPY)3]2+, was shown to produce significant anodic photocurrents when irradiated with visible light in the absence of a supersensitiser.
Abstract: SEMICONDUCTING electrodes stable in aqueous solution during the photoelectrochemical oxidation of water have generally been large-bandgap oxides, and their photosensitisation to visible light is of continuing interest1. In particular, n-type TiO2 (rutile, with a bandgap of 3.0 eV) is a stable photoanode for the photoelectrolysis of water by uv light2, and considerable effort has been devoted to its photosensitisation to sunlight1. One approach to photosensitisation is the use of a dye that, on excitation by visible light, transfers an electron to the conduction band of the solid and subsequently returns to its reduced ground state by the oxidation of water. The three major problems to be avoided are (1) irreversible degradative oxidation of the dye3, (2) failure of the oxidised form of the dye to oxidise water, reduction being carried out by a supersensitiser, such as hydro-quinone, that is consumed by the reaction4,5, and (3) inefficient electron transfer from the dye to the solid6. To circumvent the first two of these problems, we have selected an inorganic complex as the dye, a derivative of [Ru(BIPY)3]2+ (BIPY = 2,2′-bipyridine). [Ru(BIPY)3]3+ is known to oxidise water in suitable pH conditions evolving about 80% of the theoretical yield of oxygen7. The last problem was avoided by chemically attaching the complex to the electrode surface, a procedure recently demonstrated for organic dyes (such as rhodamine-B) that require the use of a supersensitiser4,5. We report here that a single-crystal n-type TiO2 electrode, chemically modified by the attachment of a monolayer of a derivative of [Ru(BIPY)3]2+, will produce significant anodic photocurrents when irradiated with visible light in the absence of a supersensitiser.
181 citations
Cited by
More filters
••
TL;DR: This critical review shows the basis of photocatalytic water splitting and experimental points, and surveys heterogeneous photocatalyst materials for water splitting into H2 and O2, and H2 or O2 evolution from an aqueous solution containing a sacrificial reagent.
Abstract: This critical review shows the basis of photocatalytic water splitting and experimental points, and surveys heterogeneous photocatalyst materials for water splitting into H2 and O2, and H2 or O2 evolution from an aqueous solution containing a sacrificial reagent Many oxides consisting of metal cations with d0 and d10 configurations, metal (oxy)sulfide and metal (oxy)nitride photocatalysts have been reported, especially during the latest decade The fruitful photocatalyst library gives important information on factors affecting photocatalytic performances and design of new materials Photocatalytic water splitting and H2 evolution using abundant compounds as electron donors are expected to contribute to construction of a clean and simple system for solar hydrogen production, and a solution of global energy and environmental issues in the future (361 references)
8,850 citations
••
TL;DR: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency as mentioned in this paper, and many DSC research groups have been established around the world.
Abstract: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...
8,707 citations
••
TL;DR: In this paper, the authors reviewed the challenges for further development of Li rechargeable batteries for electric vehicles and proposed a nonflammable electrolyte with either a larger window between its lowest unoccupied molecular orbital and highest occupied molecular orbital (HOMO) or a constituent that can develop rapidly a solid/ electrolyte-interface (SEI) layer to prevent plating of Li on a carbon anode during a fast charge of the battery.
Abstract: The challenges for further development of Li rechargeable batteries for electric vehicles are reviewed. Most important is safety, which requires development of a nonflammable electrolyte with either a larger window between its lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) or a constituent (or additive) that can develop rapidly a solid/ electrolyte-interface (SEI) layer to prevent plating of Li on a carbon anode during a fast charge of the battery. A high Li-ion conductivity (σ Li > 10 ―4 S/cm) in the electrolyte and across the electrode/ electrolyte interface is needed for a power battery. Important also is an increase in the density of the stored energy, which is the product of the voltage and capacity of reversible Li insertion/extraction into/from the electrodes. It will be difficult to design a better anode than carbon, but carbon requires formation of an SEI layer, which involves an irreversible capacity loss. The design of a cathode composed of environmentally benign, low-cost materials that has its electrochemical potential μ C well-matched to the HOMO of the electrolyte and allows access to two Li atoms per transition-metal cation would increase the energy density, but it is a daunting challenge. Two redox couples can be accessed where the cation redox couples are "pinned" at the top of the O 2p bands, but to take advantage of this possibility, it must be realized in a framework structure that can accept more than one Li atom per transition-metal cation. Moreover, such a situation represents an intrinsic voltage limit of the cathode, and matching this limit to the HOMO of the electrolyte requires the ability to tune the intrinsic voltage limit. Finally, the chemical compatibility in the battery must allow a long service life.
8,535 citations
••
TL;DR: Approaches to Modifying the Electronic Band Structure for Visible-Light Harvesting and its Applications d0 Metal Oxide Photocatalysts 6518 4.4.1.
Abstract: 2.3. Evaluation of Photocatalytic Water Splitting 6507 2.3.1. Photocatalytic Activity 6507 2.3.2. Photocatalytic Stability 6507 3. UV-Active Photocatalysts for Water Splitting 6507 3.1. d0 Metal Oxide Photocatalyts 6507 3.1.1. Ti-, Zr-Based Oxides 6507 3.1.2. Nb-, Ta-Based Oxides 6514 3.1.3. W-, Mo-Based Oxides 6517 3.1.4. Other d0 Metal Oxides 6518 3.2. d10 Metal Oxide Photocatalyts 6518 3.3. f0 Metal Oxide Photocatalysts 6518 3.4. Nonoxide Photocatalysts 6518 4. Approaches to Modifying the Electronic Band Structure for Visible-Light Harvesting 6519
6,332 citations
•
03 Aug 2010TL;DR: The dye-sensitized solar cells (DSC) as discussed by the authors provides a technically and economically credible alternative concept to present day p-n junction photovoltaic devices, where light is absorbed by a sensitizer, which is anchored to the surface of a wide band semiconductor.
Abstract: The dye-sensitized solar cells (DSC) provides a technically and economically credible alternative concept to present day p–n junction photovoltaic devices. In contrast to the conventional systems where the semiconductor assume both the task of light absorption and charge carrier transport the two functions are separated here. Light is absorbed by a sensitizer, which is anchored to the surface of a wide band semiconductor. Charge separation takes place at the interface via photo-induced electron injection from the dye into the conduction band of the solid. Carriers are transported in the conduction band of the semiconductor to the charge collector. The use of sensitizers having a broad absorption band in conjunction with oxide films of nanocrstalline morphology permits to harvest a large fraction of sunlight. Nearly quantitative conversion of incident photon into electric current is achieved over a large spectral range extending from the UV to the near IR region. Overall solar (standard AM 1.5) to current conversion efficiencies (IPCE) over 10% have been reached. There are good prospects to produce these cells at lower cost than conventional devices. Here we present the current state of the field, discuss new concepts of the dye-sensitized nanocrystalline solar cell (DSC) including heterojunction variants and analyze the perspectives for the future development of the technology.
4,159 citations