Andrzej Jakubowski

Bio: Andrzej Jakubowski is an academic researcher from Warsaw University of Technology. The author has contributed to research in topics: MOSFET & Gate dielectric. The author has an hindex of 9, co-authored 77 publications receiving 312 citations.

Optoelectronic Capillary Sensors in Microfluidic and Point-of-Care Instrumentation

Abstract: This paper presents a review, based on the published literature and on the authors’ own research, of the current state of the art of fiber-optic capillary sensors and related instrumentation as well as their applications, with special emphasis on point-of-care chemical and biochemical sensors, systematizing the various types of sensors from the point of view of the principles of their construction and operation. Unlike classical fiber-optic sensors which rely on changes in light propagation inside the fiber as affected by outside conditions, optical capillary sensors rely on changes of light transmission in capillaries filled with the analyzed liquid, which opens the possibility of interesting new applications, while raising specific issues relating to the construction, materials and instrumentation of those sensors.

Modeling of SiGe-base heterojunction bipolar transistor with gaussian doping distribution

Abstract: The results of numerical modeling of the base transit time and collector current of SiGe-base heterojunction bipolar transistors with a Gaussian base doping profile and two Ge profiles (linearly graded and box) are presented for the first time. The importance of including the dependence of minority carrier mobility on the drift field and the dependence of the effective density of states on the Ge concentration along the base is demonstrated through the analysis of base transit time and collector current. A function describing the decrease of the density of states product in strained SiGe layers with increasing Ge concentration is proposed.

Review of advances in cubic boron nitride film synthesis

Abstract: Cubic boron nitride (cBN) has a number of highly desirable mechanical, thermal, electrical, and optical properties. Because of this, there has been an extensive worldwide effort to synthesize thin films of cBN. Film synthesis is difficult in that without significant levels of ion bombardment during growth, only sp2-bonded BN forms, not sp3-bonded cBN. Recently there has been considerable progress in improving the deposition techniques and cBN film quality. In addition, progress has been made in understanding how energetic deposition conditions can lead to cBN formation. However, unanswered questions remain and process improvements are still needed. In this paper we critically and comprehensively review recent developments in cBN film synthesis and characterization. First, the structures and stability of the BN phases and characterization techniques are described. Next, the key experimental parameters controlling cBN film formation and synthesis techniques are discussed. Following a review of microstructure, the proposed mechanisms of cBN formation and the observed mechanical and electrical properties of cBN films are analyzed. We conclude by highlighting the current impediments to the practical realization of cBN-film technology.

Biomedical applications of diamond-like carbon coatings : A review

Abstract: Owing to its superior tribological and mechanical properties with corrosion resistance, biocompatibility, and hemocompatibility, diamond-like carbon (DLC) has emerged as a promising material for biomedical applications. DLC films with various atomic bond structures and compositions are finding places in orthopedic, cardiovascular, and dental applications. Cells grew on to DLC coating without any cytotoxity and inflammation. DLC coatings in orthopedic applications reduced wear, corrosion, and debris formation. DLC coating also reduced thrombogenicity by minimizing the platelet adhesion and activation. However, some contradictory results (Airoldi et al., Am J Cardiol 2004;93:474-477, Taeger et al., Mat-wiss u Werkstofftech 2003;34:1094-1100) were also reported that no significant improvement was observed in the performance of DLC-coated stainless stent or DLC-coated femoral head. This controversy should be discussed based on the detailed information of the coating such as atomic bond structure, composition, and/or electronic structure. In addition, instability of the DLC coating caused by its high level of residual stress and poor adhesion in aqueous environment should be carefully considered. Further in vitro and in vivo studies are thus required to confirm its use for medical devices.

Protein adsorption and platelet attachment and activation, on TiN, TiC, and DLC coatings on titanium for cardiovascular applications

Abstract: The hemocompatibility of a TiN/TiC/diamond-like carbon (DLC) multilayer structure, deposited on titanium substrates for use as coatings for a heart valve prosthesis, has been studied through the adsorption of blood proteins and the adhesion and attachment of blood platelets. All of the surfaces were characterized by stylus profilometry and water contact angles. The adsorption of albumin and fibrinogen to the surfaces was assessed using the Amido Black assay, whereas platelet attachment was studied by scanning electron microscopy and quantified using stereological techniques. The degree of platelet spreading on the surfaces was seen to correlate with differences in surface energy, indicated from contact angle measurements. The greatest spreading was seen on the more hydrophilic surfaces. When studying protein adsorption to the surfaces, no correlation could be determined between contact angle results and levels of adsorption, although the most hydrophilic surfaces did appear to promote greater amounts of fibrinogen adsorption. Thrombus formation was observed to some degree on all of the surfaces, with the exception of the DLC coating. This coating also promoted less spreading of platelets than the other surfaces. The good hemocompatibility of the DLC coating is attributed to its hydrophobicity and smooth surface, resulting in a higher ratio of albumin to fibrinogen than any of the other surfaces.

TiO2 nanotubes on Ti: Influence of nanoscale morphology on bone cell-materials interaction.

Abstract: Ti being bioinert shows poor bone cell adhesion with an intervening fibrous capsule. Ti could be made bioactive by several methods including growing in situ TiO2 layer on Ti-surface. TiO2 nanotubes were grown on Ti surface via anodization process and the bone cell-material interactions were evaluated. Human osteoblast cell attachment and growth behavior were studied using an osteoprecursor cell line for 3, 7, and 11 days. An abundant amount of extracellular matrix (ECM) between the neighboring cells was noticed on anodized nanotube surface with filopodia extensions coming out from cells to grasp the nanoporous surface of the nanotube for anchorage. To better understand and compare cell-materials interactions, anodized nanoporous sample surfaces were etched with different patterns. Preferential cell attachment was noticed on nanotube surface compare to almost no cells in etched Ti surface. Cell adhesion with vinculin adhesive protein showed higher intensity, positive contacts on nanoporous surface and thin focal contacts on the Ti-control. Immunochemistry study with alkaline phosphatase showed enhanced osteoblastic phenotype expressions in nanoporous surface. Osteoblast proliferation was significantly higher on anodized nanotube surface. Surface properties changed with the emergence of nanoscale morphology. Higher nanometer scale roughness, low contact angle and high surface energy in nanoporous surface enhanced the osteoblast-material interactions. Mineralization study was done under simulated body fluid (SBF) with ion concentration nearly equal to human blood plasma to understand biomimetic apatite deposition behavior. Although apatite layer formation was noticed on nanotube surface, but it was nonuniform even after 21 days in SBF.