Fast pyrolysis utilizes biomass to produce a product that is used both as an energy source and a feedstock for chemical production. Considerable efforts have been made to convert wood biomass to liquid fuels and chemicals since the oil crisis in mid-1970s. This review focuses on the recent developments in the wood pyrolysis and reports the characteristics of the resulting bio-oils, which are the main products of fast wood pyrolysis. Virtually any form of biomass can be considered for fast pyrolysis. Most work has been performed on wood, because of its consistency and comparability between tests. However, nearly 100 types of biomass have been tested, ranging from agricultural wastes such as straw, olive pits, and nut shells to energy crops such as miscanthus and sorghum. Forestry wastes such as bark and thinnings and other solid wastes, including sewage sludge and leather wastes, have also been studied. In this review, the main (although not exclusive) emphasis has been given to wood. The literature on woo...

Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review

Fast pyrolysis of biomass is one of the most recent renewable energy processes to have been introduced. It offers the advantages of a liquid product, bio-oil that can be readily stored and transported. Bio-oil is a renewable liquid fuel and can also be used for production of chemicals. Fast pyrolysis has now achieved a commercial success for production of chemicals and is being actively developed for producing liquid fuels. Bio-oils have been successfully tested in engines, turbines, and boilers, and have been upgraded to high-quality hydrocarbon fuels, although at a presently unacceptable energetic and financial cost. The paper critically reviews scientific and technical developments in applications of bio-oil to date and concludes with some suggestions for research and strategic developments.

Overview of Applications of Biomass Fast Pyrolysis Oil

Pyrolysis is one of the thermochemical technologies for converting biomass into energy and chemical products consisting of liquid bio-oil, solid biochar, and pyrolytic gas. Depending on the heating rate and residence time, biomass pyrolysis can be divided into three main categories slow (conventional), fast and flash pyrolysis mainly aiming at maximising either the bio-oil or biochar yields. Synthesis gas or hydrogen-rich gas can also be the target of biomass pyrolysis. Maximised gas rates can be achieved through the catalytic pyrolysis process, which is now increasingly being developed. Biomass pyrolysis generally follows a three-step mechanism comprising of dehydration, primary and secondary reactions. Dehydrogenation, depolymerisation, and fragmentation are the main competitive reactions during the primary decomposition of biomass. A number of parameters affect the biomass pyrolysis process, yields and properties of products. These include the biomass type, biomass pretreatment (physical, chemical, and biological), reaction atmosphere, temperature, heating rate and vapour residence time. This manuscript gives a general summary of the properties of the pyrolytic products and their analysis methods. Also provided are a review of the parameters that affect biomass pyrolysis and a summary of the state of industrial pyrolysis technologies.

Lignocellulosic biomass pyrolysis: A review of product properties and effects of pyrolysis parameters

http://ehsan13967.persiangig.com/document/pyrolysis6.pdf

Review of biomass pyrolysis oil properties and upgrading research

http://www.adktroutguide.com/files/2003_Pyrolysis_of_biomass_and_sludge_to_produce_fuels_and_chemical_feedstocks.pdf

Pyrolysis of biomass to produce fuels and chemical feedstocks

Biomass pyrolysis oils have potential to be used as a fuel oil substitute. Combustion tests have shown that the oils burn efficiently in standard or slightly modified boilers and engines with rates similar to those for commercial fuels. However, these tests also identified several challenges in bio-oils applications resulting from their properties. The oils have heating values of only 40−50% of that for hydrocarbon fuels. They have a high water content that is detrimental for ignition. Organic acids in the oils are corrosive to common construction materials. Solids (char) can block injectors or erode turbine blades. Over time, reactivity of some components in the oils leads to formation of larger molecules that results in high viscosity and in slower combustion. This paper discusses physical and chemical characteristics of bio-oils relevant to fuel applications as well as some low-cost methods for improvement of these properties. It also provides bio-oil specifications proposed by some industrial users an...

Anja Oasmaa

Papers

Fuel oil quality of biomass pyrolysis oils-state of the art for the end users