scispace - formally typeset
Search or ask a question
Author

Anna Schneider

Bio: Anna Schneider is an academic researcher from Brandenburg University of Technology. The author has contributed to research in topics: Charcoal & Soil water. The author has an hindex of 12, co-authored 37 publications receiving 466 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: The described method can considerably facilitate the mapping and distribution analysis of kiln sites or similar small relief forms that are prominent in a specific landscape and the number of false detections can be reduced using a combination of morphometric variables.
Abstract: Analysing the spatial distribution of anthropogenic relief structures can contribute to the understanding of past land-use systems. With automated mapping routines, small relief forms can be detected efficiently from high-resolution digital terrain models (DTMs). In this study, we describe an approach for the automated mapping of charcoal kiln sites from an airborne laser-scanning DTM. The study site is located north of Cottbus, Germany, where an exceptionally large historic charcoal production field has been documented in previous archaeological surveys. The goal of this study was to implement, evaluate and improve an automated GIS-based routine for mapping these features based on the template-matching principle. In addition to the DTM, different morphometric variables were evaluated for their suitability to detect kiln sites. The mapping results were validated against a comprehensive database of kiln sites recorded from archaeological excavations and via manual digitization. The effects of irregular kiln-site geometry and DTM noise were evaluated using synthetic DTMs. The results of the synthetic DTM mapping show that the template-matching results differed depending on the morphometric variable used for the mapping process. In accordance with this observation, a validation of the mapping procedure for the field site suggests that feature mapping can be improved. In particular, the number of false detections can be reduced using a combination of morphometric variables. For the validation area, the kiln sites with diameters of at least 10 m were mapped using the automated routine, with detection rates that were close to those of manual digitization. Therefore, the described method can considerably facilitate the mapping and distribution analysis of kiln sites or similar small relief forms that are prominent in a specific landscape. Copyright © 2014 John Wiley & Sons, Ltd.

73 citations

Journal ArticleDOI
TL;DR: In this article, a combined approach using archaeological research results, GIS-analyses of shaded-relief maps (SRMs) and tree-ring dating of selected charcoal kiln remains was applied to the spatial extension and timing of charcoal production in the Janschwalder Heide and its surrounding areas.

61 citations

Journal ArticleDOI
TL;DR: In this article, the authors studied the soil chemistry of 24 charcoal hearths and compared them to the surrounding natural soils in the northern Appalachians of northwestern Connecticut, finding that the topsoils on the hearths had higher carbon content than in the surrounding topsoil.
Abstract: Historic charcoal hearth remains provide a unique archive of the long term interaction between biochar, soil development and plant growth. Charcoal as raw material was crucial for production of iron in iron works and hence numerous charcoal hearths can be found in the forests near historic iron works in Europe as well as the Eastern United States. Charcoal hearths are round to elliptical forms often around 10 m in diameter, and consist of several decimeter thick layers that contain charcoal fragments, ash, and burnt soil. We studied the soil chemistry of 24 charcoal hearths and compared them to the surrounding ‘natural’ soils in the northern Appalachians of northwestern Connecticut. The thickness of the topsoils on the charcoal hearths and their carbon content are remarkably higher than in the surrounding topsoils. The presence of residual products from charcoal production classifies the soils as Anthropic Udorthents (US Soil Taxonomy) or Spolic Technosols (Humic) according to the World Reference Base for Soil Resources. The widespread occurrence of charcoal hearth remains and their high spatial density in different ecosystems underlines their importance for further pedological research.

45 citations

Journal ArticleDOI
TL;DR: In this paper, the authors analyzed a series of photogrammetry-based digital elevation models (DEMs) for 10 points in time, over a period of five years and beginning with the initial state.
Abstract: The formation of erosion rills and gullies is a critical step in land surface development, but possibilities to study initial unaffected surface development under natural conditions and with well-defined initial and boundary conditions are rare. The objective of this study was to characterize rill network development from ’point zero’ in the artificially-created catchment ‘Huhnerwasser’. To ensure unaffected development, the study was largely restricted to the analysis of remotely-sensed data. We analyzed a series of photogrammetry-based digital elevation models (DEMs) for 10 points in time, over a period of five years and beginning with the initial state. The evolving erosion rill network was quantitatively described based on mapping from aerial photographs. DEMs and rill network maps were combined to specifically analyze the development of morphometry for different parts of the network and to characterize energy dissipation and connectivity. The restriction to remote-sensing data did not allow for analyzing specific processes governing rill network development, nevertheless, two major development phases could be characterized. We observed a phase of growth of the rill network along with variations in drainage patterns during the first two years of development and a subsequent phase of reduction of its area along with comparably stable patterns. Region-specific analysis of morphometry indicates that, besides effects of changing sediment characteristics and vegetation cover development, locally evolving hydro-geomorphic feedback cycles influenced this development. Results show an increasing similarity of overall statistical characteristics (e.g. drainage density) for two parts of the catchment, but a persistent influence of initial conditions on specific rill geometry. The observed development towards higher orderliness and increased connectivity is consistent with experiments and concepts on drainage network evolution across scales; however, we did not observe major influences of rill piracy and cross grading or a reduction of energy dissipation with network development. Copyright © 2013 John Wiley & Sons, Ltd.

43 citations

Journal ArticleDOI
TL;DR: The Earth's surface is the dynamic interface of climatic, biotic, and geologic systems and is often described as the Earth's critical zone as mentioned in this paper, where structures and processes within this zone are highly complex and heterogeneous and therefore not yet completely understood.
Abstract: The Earth's surface is the dynamic interface of climatic, biotic, and geologic systems and is often described as the Earth's critical zone. Structures and processes within this zone are highly complex and heterogeneous and therefore not yet completely understood, particularly with regard to their interactions. In contrast, parts of the critical zone still in their initial development stages are expected to be less complex and heterogeneous compared to mature systems. Therefore, research approaches concentrating on this crucial initial development period of ecosystems have been recently initiated. A central hypothesis is that the initial ecosystem development phase forms the later state of ecosystems. Similarly, the behavior of mature ecosystems can only be understood if knowledge about their evolution exists. The initial development stages of geo-ecosystems are characterized by highly dynamic abiotic and biotic processes. This results in the rapid formation and alteration of structures, which in turn cons...

42 citations


Cited by
More filters
01 Apr 2015
TL;DR: In this article, the changes of pine chip (PC)- and corn digestate (CD)-derived biochars pyrolyzed at 400 or 600°C during 100 days of laboratory incubation in a historical kiln soil and an adjacent control soil were investigated.
Abstract: Biochar is suggested for soil amelioration and carbon sequestration, based on its assumed role as the key factor for the long-term fertility of Terra preta soils. Several studies have shown that certain biochar properties can undergo changes through ageing processes, especially regarding charge characteristics. However, only a few studies determined the changes of different biochars under the same incubation conditions and in different soils. The objective of this study was to characterize the changes of pine chip (PC)- and corn digestate (CD)-derived biochars pyrolyzed at 400 or 600 °C during 100 days of laboratory incubation in a historical kiln soil and an adjacent control soil. Separation between soil and biochar was ensured by using mesh bags. Especially, changes in charge characteristics depended on initial biochar properties affected by feedstock and pyrolysis temperature and on soil properties affected by historic charcoal production. While the cation exchange capacity (CEC) markedly increased for both CD biochars during incubation, PC biochars showed no or only slight increases in CEC. Corresponding to the changes in CEC, ageing of biochars also increased the amount of acid functional groups with increases being in average about 2-fold higher in CD biochars than in PC biochars. Further and in contrast to other studies, the surface areas of biochars increased during ageing. Changes in CEC and surface acidity of CD biochar were more pronounced after incubation in the control soil, while surface area increase was higher in the kiln soil. Since the two acidic forest soils used in this study did not greatly differ in physical or chemical properties, the main process for inducing these differences in the buried biochar most likely is related to the differences in dissolved organic carbon (DOC). Although the kiln soil contained about 50% more soil organic carbon due to the presence of charcoal particles, extractable DOC was lower and less aromatic than in the adjacent control soil, likely due to strong sorption of dissolved organic matter (DOM) onto charcoal particles. We suggest that higher sorption of DOM onto the surface of biochar in the control soil provided additional acid functional groups and thus increased the surface charge to a greater extent than in the DOC poorer kiln soil. Hence, biochars incubated in the kiln soil showed less changes in CEC and surface acidity. Higher availability of DOM in the control soil could also stimulate microbial activity to a larger extent, resulting in higher oxidation rates of biochars incubated in the control soil.

122 citations

Journal ArticleDOI
TL;DR: This paper provides a “recipe” and a tool for a mix of visualization techniques and blend modes, including all the settings, to compute a visualization for archaeological topography that meets all of the criteria of a good visualization.
Abstract: Visualization products computed from a raster elevation model still form the basis of most archaeological and geomorphological enquiries of lidar data. We believe there is a need to improve the existing visualizations and create meaningful image combinations that preserve positive characteristics of individual techniques. In this paper, we list the criteria a good visualization should meet, present five different blend modes (normal, screen, multiply, overlay, luminosity), which combine various images into one, discuss their characteristics, and examine how they can be used to improve the visibility (recognition) of small topographical features. Blending different relief visualization techniques allows for a simultaneous display of distinct topographical features in a single (enhanced) image. We provide a “recipe” and a tool for a mix of visualization techniques and blend modes, including all the settings, to compute a visualization for archaeological topography that meets all of the criteria of a good visualization.

119 citations

Journal ArticleDOI
TL;DR: Explosive eruptions can severely disturb landscapes downwind or downstream of volcanoes by damaging vegetation and depositing large volumes of erodible fragmental material, and fluxes of water and sediment in affected drainage basins can increase dramatically.
Abstract: Explosive eruptions can severely disturb landscapes downwind or downstream of volcanoes by damaging vegetation and depositing large volumes of erodible fragmental material. As a result, fluxes of water and sediment in affected drainage basins can increase dramatically. System-disturbing processes associated with explosive eruptions include tephra fall, pyroclastic density currents, debris avalanches, and lahars—processes that have greater impacts on water and sediment discharges than lava-flow emplacement. Geo-morphic responses to such disturbances can extend far downstream, persist for decades, and be hazardous. The severity of disturbances to a drainage basin is a function of the specific volcanic process acting, as well as distance from the volcano and magnitude of the eruption. Postdisturbance unit-area sediment yields are among the world's highest; such yields commonly result in abundant redeposition of sand and gravel in distal river reaches, which causes severe channel aggradation and instability. ...

111 citations

Journal ArticleDOI
TL;DR: In this article, the performance of SfM and TLS technologies at reconstructing soil microtopography on 6'm × 2'm erosion plots with vegetation cover ranging from 0% to 77%.
Abstract: Soil microtopography is a property of critical importance in many earth surface processes but is often difficult to quantify. Advances in computer vision technologies have made image-based three-dimensional (3D) reconstruction or Structure-from-Motion (SfM) available to many scientists as a low cost alternative to laser-based systems such as terrestrial laser scanning (TLS). While the performance of SfM at acquiring soil surface microtopography has been extensively compared to that of TLS on bare surfaces, little is known about the impact of vegetation on reconstruction performance. This article evaluates the performance of SfM and TLS technologies at reconstructing soil microtopography on 6 m × 2 m erosion plots with vegetation cover ranging from 0% to 77%. Results show that soil surface occlusion by vegetation was more pronounced with TLS compared to SfM, a consequence of the single viewpoint laser scanning strategy adopted in this study. On the bare soil surface, elevation values estimated with SfM were within 5 mm of those from TLS although long distance deformations were observed with the former technology. As vegetation cover increased, agreement between SfM and TLS slightly degraded but was significantly affected beyond 53% of ground cover. Detailed semivariogram analysis on meter-square-scale surface patches showed that TLS and SfM surfaces were very similar even on highly vegetated plots but with fine scale details and the dynamic elevation range smoothed out with SfM. Errors in the TLS data were mainly caused by the distance measurement function of the instrument especially at the fringe of occlusion regions where the laser beam intersected foreground and background features simultaneously. From this study, we conclude that a realistic approach to digitizing soil surface microtopography in field conditions can be implemented by combining strengths of the image-based method (simplicity and effectiveness at reconstructing soil surface under sparse vegetation) with the high accuracy of TLS-like technologies. Copyright © 2015 John Wiley & Sons, Ltd.

111 citations

Book
10 Oct 2016
TL;DR: The Anthropocene is a major new concept in the Earth sciences and as discussed by the authors examines the effects on geomorphology within this period, drawing examples from many different global environments, demonstrating that human impact on landforms and land-forming processes is profound.
Abstract: The Anthropocene is a major new concept in the Earth sciences and this book examines the effects on geomorphology within this period. Drawing examples from many different global environments, this comprehensive volume demonstrates that human impact on landforms and land-forming processes is profound, due to various driving forces, including: use of fire; extinction of fauna; development of agriculture, urbanisation, and globalisation; and new methods of harnessing energy. The book explores the ways in which future climate change due to anthropogenic causes may further magnify effects on geomorphology, with respect to future hazards such as floods and landslides, the state of the cryosphere, and sea level. The book concludes with a consideration of the ways in which landforms are now being managed and protected. Covering all major aspects of geomorphology, this book is ideal for undergraduate and graduate students studying geomorphology, environmental science and physical geography, and for all researchers of geomorphology.

104 citations