Anthony J. Prenni

Bio: Anthony J. Prenni is an academic researcher from National Park Service. The author has contributed to research in topics: Aerosol & Ice nucleus. The author has an hindex of 21, co-authored 40 publications receiving 2539 citations. Previous affiliations of Anthony J. Prenni include Colorado State University.

Predicting global atmospheric ice nuclei distributions and their impacts on climate

Abstract: Knowledge of cloud and precipitation formation processes remains incomplete, yet global precipitation is predominantly produced by clouds containing the ice phase. Ice first forms in clouds warmer than -36 °C on particles termed ice nuclei. We combine observations from field studies over a 14-year period, from a variety of locations around the globe, to show that the concentrations of ice nuclei active in mixed-phase cloud conditions can be related to temperature and the number concentrations of particles larger than 0.5 μm in diameter. This new relationship reduces unexplained variability in ice nuclei concentrations at a given temperature from ∼103 to less than a factor of 10, with the remaining variability apparently due to variations in aerosol chemical composition or other factors. When implemented in a global climate model, the new parameterization strongly alters cloud liquid and ice water distributions compared to the simple, temperature-only parameterizations currently widely used. The revised treatment indicates a global net cloud radiative forcing increase of ∼1 W m-2 for each order of magnitude increase in ice nuclei concentrations, demonstrating the strong sensitivity of climate simulations to assumptions regarding the initiation of cloud glaciation.

Integrating laboratory and field data to quantify the immersion freezing ice nucleation activity of mineral dust particles

Abstract: . Data from both laboratory studies and atmospheric measurements are used to develop an empirical parameterization for the immersion freezing activity of natural mineral dust particles. Measurements made with the Colorado State University (CSU) continuous flow diffusion chamber (CFDC) when processing mineral dust aerosols at a nominal 105% relative humidity with respect to water (RHw) are taken as a measure of the immersion freezing nucleation activity of particles. Ice active frozen fractions vs. temperature for dusts representative of Saharan and Asian desert sources were consistent with similar measurements in atmospheric dust plumes for a limited set of comparisons available. The parameterization developed follows the form of one suggested previously for atmospheric particles of non-specific composition in quantifying ice nucleating particle concentrations as functions of temperature and the total number concentration of particles larger than 0.5 μm diameter. Such an approach does not explicitly account for surface area and time dependencies for ice nucleation, but sufficiently encapsulates the activation properties for potential use in regional and global modeling simulations, and possible application in developing remote sensing retrievals for ice nucleating particles. A calibration factor is introduced to account for the apparent underestimate (by approximately 3, on average) of the immersion freezing fraction of mineral dust particles for CSU CFDC data processed at an RHw of 105% vs. maximum fractions active at higher RHw. Instrumental factors that affect activation behavior vs. RHw in CFDC instruments remain to be fully explored in future studies. Nevertheless, the use of this calibration factor is supported by comparison to ice activation data obtained for the same aerosols from Aerosol Interactions and Dynamics of the Atmosphere (AIDA) expansion chamber cloud parcel experiments. Further comparison of the new parameterization, including calibration correction, to predictions of the immersion freezing surface active site density parameterization for mineral dust particles, developed separately from AIDA experimental data alone, shows excellent agreement for data collected in a descent through a Saharan aerosol layer. These studies support the utility of laboratory measurements to obtain atmospherically relevant data on the ice nucleation properties of dust and other particle types, and suggest the suitability of considering all mineral dust as a single type of ice nucleating particle as a useful first-order approximation in numerical modeling investigations.

The effects of low molecular weight dicarboxylic acids on cloud formation

Abstract: The ubiquitous presence of organic compounds in tropospheric particles requires that their role in aerosol/cloud interactions be accounted for in climate models. In this paper, we present studies that investigate the hygroscopic behavior of organic compounds and their efficiency as ice nuclei. Specifically, results for soluble and partially soluble dicarboxylic acids that have been observed in atmospheric aerosol are discussed. At room temperature, we use a humidified tandem differential mobility analyzer (HTDMA) and a condensation particle counter interfaced with a cloud condensation nuclei counter to characterize the water uptake behavior of these acids. The HTDMA data agree quite well with modeled hygroscopic behavior. However, we find that some of the compounds retain water to very low humidities, never exhibiting efflorescence. The studies are extended to lower temperatures using a continuous flow ice thermal diffusion chamber to investigate the role of these species in ice nucleation at cirrus condi...

Cloud droplet activation of secondary organic aerosol

Abstract: [1] Measurements of hygroscopicity and cloud condensation nuclei (CCN) activity were conducted on secondary organic aerosol (SOA) formed in a smog chamber. SOA precursors included α-pinene, β-pinene, Δ3-carene, and toluene, representative of both naturally and anthropogenically emitted organic species. Measured CCN activation was comparable for all of the species studied and occurred at humidity conditions which are readily attained in the atmosphere. Further, there was little variation in hygroscopic growth between compounds. However, measured droplet activation conditions were inconsistent with hygroscopicity measured below water saturation and Kohler theory expressions based on Raoult’s law for several parameterizations for water activity. In the atmosphere, SOA may compose a large fraction of atmospheric particulate matter and will often exist internally mixed with inorganic species. Using the current results, we compare SOA to insoluble organic species to calculate CCN activation from mixed organic-sulfate particles for a range of atmospheric conditions. We find that droplet activation behavior of mixed particles containing SOA is the same as that of mixed particles for which the organic component is nonhygroscopic, except for cases in which there are low particle concentrations, low updraft velocities, and the aerosol composition is dominated by organics.

Infrared spectroscopic study of the deliquescence and efflorescence of ammonium sulfate aerosol as a function of temperature

Abstract: The deliquescence and efflorescence phase transitions of ammonium sulfate aerosols have been studied as a function of relative humidity (RH) over the temperature range from 234 K to 295 K. Polydisperse submicrometer ammonium sulfate particles produced by atomization were monitored in a temperature-controlled flow tube system using Fourier transform infrared spectroscopy. The relative humidity in the aerosol flow was controlled using a sulfuric acid bath conditioner and the addition of a known flow of dry nitrogen. The relative humidity was measured using a dew point hygrometer and infrared absorption features. The deliquescence transition was observed to be nearly independent of temperature, changing from 80% RH at 294.8 K to 82% RH at 258.0 K near the ice saturation line, in good agreement with previous results. The relative humidity at the efflorescence transition also increased slightly (32% to 39%) with decreasing temperature (294.8 K to 234.3 K). These results suggest that once a crystalline ammonium sulfate particle deliquesces, the droplet can exist as a metastable solution droplet over a broad region of temperature and water pressures under the conditions in the upper troposphere. The persistence of metastable ammonium sulfate solution droplets may have important implications for cirrus cloud formation and heterogeneous reaction rates in the upper troposphere.

Bounding the role of black carbon in the climate system: A scientific assessment

Abstract: Black carbon aerosol plays a unique and important role in Earth's climate system. Black carbon is a type of carbonaceous material with a unique combination of physical properties. This assessment provides an evaluation of black-carbon climate forcing that is comprehensive in its inclusion of all known and relevant processes and that is quantitative in providing best estimates and uncertainties of the main forcing terms: direct solar absorption; influence on liquid, mixed phase, and ice clouds; and deposition on snow and ice. These effects are calculated with climate models, but when possible, they are evaluated with both microphysical measurements and field observations. Predominant sources are combustion related, namely, fossil fuels for transportation, solid fuels for industrial and residential uses, and open burning of biomass. Total global emissions of black carbon using bottom-up inventory methods are 7500 Gg yr−1 in the year 2000 with an uncertainty range of 2000 to 29000. However, global atmospheric absorption attributable to black carbon is too low in many models and should be increased by a factor of almost 3. After this scaling, the best estimate for the industrial-era (1750 to 2005) direct radiative forcing of atmospheric black carbon is +0.71 W m−2 with 90% uncertainty bounds of (+0.08, +1.27) W m−2. Total direct forcing by all black carbon sources, without subtracting the preindustrial background, is estimated as +0.88 (+0.17, +1.48) W m−2. Direct radiative forcing alone does not capture important rapid adjustment mechanisms. A framework is described and used for quantifying climate forcings, including rapid adjustments. The best estimate of industrial-era climate forcing of black carbon through all forcing mechanisms, including clouds and cryosphere forcing, is +1.1 W m−2 with 90% uncertainty bounds of +0.17 to +2.1 W m−2. Thus, there is a very high probability that black carbon emissions, independent of co-emitted species, have a positive forcing and warm the climate. We estimate that black carbon, with a total climate forcing of +1.1 W m−2, is the second most important human emission in terms of its climate forcing in the present-day atmosphere; only carbon dioxide is estimated to have a greater forcing. Sources that emit black carbon also emit other short-lived species that may either cool or warm climate. Climate forcings from co-emitted species are estimated and used in the framework described herein. When the principal effects of short-lived co-emissions, including cooling agents such as sulfur dioxide, are included in net forcing, energy-related sources (fossil fuel and biofuel) have an industrial-era climate forcing of +0.22 (−0.50 to +1.08) W m−2 during the first year after emission. For a few of these sources, such as diesel engines and possibly residential biofuels, warming is strong enough that eliminating all short-lived emissions from these sources would reduce net climate forcing (i.e., produce cooling). When open burning emissions, which emit high levels of organic matter, are included in the total, the best estimate of net industrial-era climate forcing by all short-lived species from black-carbon-rich sources becomes slightly negative (−0.06 W m−2 with 90% uncertainty bounds of −1.45 to +1.29 W m−2). The uncertainties in net climate forcing from black-carbon-rich sources are substantial, largely due to lack of knowledge about cloud interactions with both black carbon and co-emitted organic carbon. In prioritizing potential black-carbon mitigation actions, non-science factors, such as technical feasibility, costs, policy design, and implementation feasibility play important roles. The major sources of black carbon are presently in different stages with regard to the feasibility for near-term mitigation. This assessment, by evaluating the large number and complexity of the associated physical and radiative processes in black-carbon climate forcing, sets a baseline from which to improve future climate forcing estimates.

Climate Change 2007: The Physical Science Basis.

Abstract: Cause, conseguenze e strategie di mitigazione Proponiamo il primo di una serie di articoli in cui affronteremo l’attuale problema dei mutamenti climatici. Presentiamo il documento redatto, votato e pubblicato dall’Ipcc - Comitato intergovernativo sui cambiamenti climatici - che illustra la sintesi delle ricerche svolte su questo tema rilevante.

The formation, properties and impact of secondary organic aerosol: current and emerging issues

Abstract: Secondary organic aerosol (SOA) accounts for a significant fraction of ambient tropospheric aerosol and a detailed knowledge of the formation, properties and transformation of SOA is therefore required to evaluate its impact on atmospheric processes, climate and human health. The chemical and physical processes associated with SOA formation are complex and varied, and, despite considerable progress in recent years, a quantitative and predictive understanding of SOA formation does not exist and therefore represents a major research challenge in atmospheric science. This review begins with an update on the current state of knowledge on the global SOA budget and is followed by an overview of the atmospheric degradation mechanisms for SOA precursors, gas-particle partitioning theory and the analytical techniques used to determine the chemical composition of SOA. A survey of recent laboratory, field and modeling studies is also presented. The following topical and emerging issues are highlighted and discussed in detail: molecular characterization of biogenic SOA constituents, condensed phase reactions and oligomerization, the interaction of atmospheric organic components with sulfuric acid, the chemical and photochemical processing of organics in the atmospheric aqueous phase, aerosol formation from real plant emissions, interaction of atmospheric organic components with water, thermodynamics and mixtures in atmospheric models. Finally, the major challenges ahead in laboratory, field and modeling studies of SOA are discussed and recommendations for future research directions are proposed.

Organic aerosol and global climate modelling: a review

Abstract: The present paper reviews existing knowledge with regard to Organic Aerosol (OA) of importance for global climate modelling and defines critical gaps needed to reduce the involved uncertainties. All pieces required for the representation of OA in a global climate model are sketched out with special attention to Secondary Organic Aerosol (SOA): The emission estimates of primary carbonaceous particles and SOA precursor gases are summarized. The up-to-date understanding of the chemical formation and transformation of condensable organic material is outlined. Knowledge on the hygroscopicity of OA and measurements of optical properties of the organic aerosol constituents are summarized. The mechanisms of interactions of OA with clouds and dry and wet removal processes parameterisations in global models are outlined. This information is synthesized to provide a continuous analysis of the flow from the emitted material to the atmosphere up to the point of the climate impact of the produced organic aerosol. The sources of uncertainties at each step of this process are highlighted as areas that require further studies.

A single parameter representation of hygroscopic growth and cloud condensation nucleus activity

Abstract: We present a method to describe the relationship between particle dry diameter and cloud condensation nu- clei (CCN) activity using a single hygroscopicity parameter . Values of the hygroscopicity parameter are between 0.5 and 1.4 for highly-CCN-active salts such as sodium chlo- ride, between 0.01 and 0.5 for slightly to very hygroscopic organic species, and 0 for nonhygroscopic components. Ob- servations indicate that atmospheric particulate matter is typ- ically characterized by 0.1<< 0.9. If compositional data are available and if the hygroscopicity parameter of each com- ponent is known, a multicomponent hygroscopicity parame- ter can be computed by weighting component hygroscopic- ity parameters by their volume fractions in the mixture. In the absence of information on chemical composition, exper- imental data for complex, multicomponent particles can be fitted to obtain the hygroscopicity parameter. The hygroscop- icity parameter can thus also be used to conveniently model the CCN activity of atmospheric particles, including those containing insoluble components. We confirm the applica- bility of the hygroscopicity parameter and its mixing rule by applying it to published hygroscopic diameter growth fac- tor and CCN-activation data for single- and multi-component particles containing varying amounts of inorganic, organic and surface active compounds. We suggest that may be fit to CCN data assuming s/a=0.072 J m 2 and present a table of derived for this value and T=298.15 K. The predicted hygroscopicities for mixtures that contain the surfactant ful- vic acid agree within uncertainties with the measured values. It thus appears that this approach is adequate for predict- ing CCN activity of mixed particles containing surface ac- tive materials, but the generality of this assumption requires further verification.