scispace - formally typeset
Search or ask a question
Author

Anton S. Tremsin

Bio: Anton S. Tremsin is an academic researcher from University of California, Berkeley. The author has contributed to research in topics: Neutron imaging & Neutron. The author has an hindex of 36, co-authored 297 publications receiving 5625 citations. Previous affiliations of Anton S. Tremsin include UCB & Space Sciences Laboratory.


Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, columnar to equiaxed transitions during solidification were used to promote the growth of highly misoriented micron scale grains outlining the letters D, O and E, through the thickness of a 25·4 mm tall bulk block comprised of primarily columnar oriented grains made of the nickel base superalloy Inconel 718.
Abstract: Site specific control of the crystallographic orientation of grains within metal components has been unachievable before the advent of metals additive manufacturing (AM) technologies. To demonstrate the capability, the growth of highly misoriented micron scale grains outlining the letters D, O and E, through the thickness of a 25·4 mm tall bulk block comprised of primarily columnar [001] oriented grains made of the nickel base superalloy Inconel 718 was promoted. To accomplish this, electron beam scan strategies were developed based on principles of columnar to equiaxed transitions during solidification. Through changes in scan strategy, the electron beam heat source can rapidly change between point and line heat source modes to promote steady state and/or transient thermal gradients and liquid/solid interface velocity. With this approach, an equiaxed solidification in the regions bounding the letters D, O and E was achieved. The through thickness existence of the equiaxed grain structure outlinin...

424 citations

01 Jan 2000
TL;DR: In this article, the IMAGE satellite instrument complement includes three Far Ultraviolet (FUV) instruments, including Wideband Imaging Camera (WIC), Spectrographic Imager (SI), and GEO instrument.
Abstract: Direct imaging of the magnetosphere by the IMAGE spacecraft will be supplemented by observation of the global aurora. The IMAGE satellite instrument complement includes three Far Ultraviolet (FUV) instruments. The Wideband Imaging Camera (WIC) will provide broad band ultraviolet images of the aurora for maximum spatial and temporal resolution by imaging the LBH N2 bands of the aurora. The Spectrographic Imager (SI), a novel form of monochromatic imager, will image the aurora, filtered by wavelength. The proton-induced component of the aurora will be imaged separately by measuring the Doppler-shifted Lyman-a. Finally, the GEO instrument will observe the distribution of the geocoronal emission to obtain the neutral background density source for charge exchange in the magnetosphere. The FUV instrument complement looks radially outward from the rotating IMAGE satellite and, therefore, it spends only a short time observing the aurora and the Earth during each spin. To maximize photon collection efficiency and use efficiently the short time available for exposures the FUV auroral imagers WIC and SI both have wide fields of view and take data continuously as the auroral region proceeds through the field of view. To minimize data volume, the set of multiple images are electronically co-added by suitably shifting each image to compensate for the spacecraft rotation. In order to minimize resolution loss, the images have to be distort ion-corrected in real time. The distortion correction is accomplished using high speed look up tables that are pre-generated by least square fitting to polynomial functions by the on-orbit processor. The instruments were calibrated individually while on stationary platforms, mostly in vacuum chambers. Extensive ground-based testing was performed with visible and near UV simulators mounted on a rotating platform to emulate their performance on a rotating spacecraft.

299 citations

Book ChapterDOI
TL;DR: The Far Ultraviolet Wideband Imaging Camera (WIC) as mentioned in this paper was mounted on the rotating IMAGE spacecraft viewing radially outward and has a field of view of 17° in the direction parallel to the spacecraft spin axis.
Abstract: The Far Ultraviolet Wideband Imaging Camera (WIC) complements the magnetospheric images taken by the IMAGE satellite instruments with simultaneous global maps of the terrestrial aurora. Thus, a primary requirement of WIC is to image the total intensity of the aurora in wavelength regions most representative of the auroral source and least contaminated by dayglow, have sufficient field of view to cover the entire polar region from spacecraft apogee and have resolution that is sufficient to resolve auroras on a scale of 1 to 2 latitude degrees. The instrument is sensitive in the spectral region from 140-190 nm. The WIC is mounted on the rotating IMAGE spacecraft viewing radially outward and has a field of view of 17° in the direction parallel to the spacecraft spin axis. Its field of view is 30° in the direction perpendicular to the spin axis, although only a 17° x 17° image of the Earth is recorded. The optics was an all-reflective, inverted Cassegrain Burch camera using concentric optics with a small convex primary and a large concave secondary mirror. The mirrors were coated by a special multi-layer coating, which has low reflectivity in the visible and near UV region. The detector consists of a MCP-intensified CCD. The MCP is curved to accommodate the focal surface of the concentric optics. The phosphor of the image intensifier is deposited on a concave fiberoptic window, which is then coupled to the CCD with a fiberoptic taper. The camera head operates in a fast frame transfer mode with the CCD being read approximately 30 full frames (512 x 256 pixel) per second with an exposure time of 0.033 s. The image motion due to the satellite spin is minimal during such a short exposure. Each image is electronically distortion corrected using the look up table scheme. An offset is added to each memory address that is proportional to the image shift due to satellite rotation, and the charge signal is digitally summed in memory. On orbit, approximately 300 frames will be added to produce one WIC image in memory. The advantage of the electronic motion compensation and distortion correction is that it is extremely flexible, permitting several kinds of corrections including motions parallel and perpendicular to the predicted axis of rotation. The instrument was calibrated by applying ultraviolet light through a vacuum monochromator and measuring the absolute responsivity of the instrument. To obtain the data for the distortion look up table, the camera was turned through various angles and the input angles corresponding to a pixel matrix were recorded. It was found that the spectral response peaked at 150 nm and fell off in either direction. The equivalent aperture of the camera, including mirror reflectivities and effective photocathode quantum efficiency, is about 0.04 cm2. Thus, a 100 Rayleigh aurora is expected to produce 23 equivalent counts per pixel per 10 s exposure at the peak of instrument response.

164 citations

Journal ArticleDOI
TL;DR: In this paper, the authors presented a detailed model for calculating the quantum detection efficiency of microchannel plate (MCP) detectors incorporating 10B, for the specific case of square channel MCP geometry.
Abstract: Microchannel plate (MCP) event-counting imaging detectors with very high spatial resolution ( ∼ 10 μ m ) and timing accuracy ( ∼ 100 ps ) are widely employed for the detection and imaging applications of electrons and ions, as well as UV and X-ray photons. Recently, it was demonstrated that the many advantages of MCPs are also applicable to neutron detection with high two-dimensional spatial resolution. Boron, enriched in the isotope 10B, was added to the MCP glass structure to enhance the neutron interaction within the MCP through the B 10 ( n , α ) 7 Li reaction. The energetic charged particle reaction products release secondary electrons directly into MCP channels, initiating an electron avalanche and a subsequent strong output pulse. In this paper we present a detailed model for calculating the quantum detection efficiency of MCP neutron detectors incorporating 10B, for the specific case of square channel MCP geometry. This model predicts that for thermal neutrons (0.025 eV), MCP detection efficiencies of up to 78% are possible using square channels. We also show theoretically that square channel MCPs should have a very sharp ( ∼ 17 mrad ) angular drop in sensitivity for detection of normal incidence neutrons, opening up new possibilities for angle-sensitive neutron imaging as well as collimation. The calculations can be used to optimize MCP neutron detection efficiency for a variety of applications. In a subsequent companion paper, the model will be extended to the case of hexagonally packed circular channels.

105 citations

Journal ArticleDOI
TL;DR: The recent progresses towards increasing the throughput of single-molecule fluorescence spectroscopy in solution using parallel arrays of SPADs are described and the development of large area photon-counting cameras achieving subnanosecond resolution for fluorescence lifetime imaging applications at the single-Molecule level is discussed.
Abstract: Two optical configurations are commonly used in single-molecule fluorescence microscopy: point-like excitation and detection to study freely diffusing molecules, and wide field illumination and detection to study surface immobilized or slowly diffusing molecules. Both approaches have common features, but also differ in significant aspects. In particular, they use different detectors, which share some requirements but also have major technical differences. Currently, two types of detectors best fulfil the needs of each approach: single-photon-counting avalanche diodes (SPADs) for point-like detection, and electron-multiplying charge-coupled devices (EMCCDs) for wide field detection. However, there is room for improvements in both cases. The first configuration suffers from low throughput owing to the analysis of data from a single location. The second, on the other hand, is limited to relatively low frame rates and loses the benefit of single-photon-counting approaches. During the past few years, new developments in point-like and wide field detectors have started addressing some of these issues. Here, we describe our recent progresses towards increasing the throughput of single-molecule fluorescence spectroscopy in solution using parallel arrays of SPADs. We also discuss our development of large area photon-counting cameras achieving subnanosecond resolution for fluorescence lifetime imaging applications at the single-molecule level.

99 citations


Cited by
More filters
Journal ArticleDOI

[...]

08 Dec 2001-BMJ
TL;DR: There is, I think, something ethereal about i —the square root of minus one, which seems an odd beast at that time—an intruder hovering on the edge of reality.
Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

33,785 citations

Journal ArticleDOI
10 Mar 1970

8,159 citations

Journal ArticleDOI
TL;DR: A review of the emerging research on additive manufacturing of metallic materials is provided in this article, which provides a comprehensive overview of the physical processes and the underlying science of metallurgical structure and properties of the deposited parts.

4,192 citations

Journal ArticleDOI
TL;DR: In this paper, the authors describe the complex relationship between additive manufacturing processes, microstructure and resulting properties for metals, and typical microstructures for additively manufactured steel, aluminium and titanium are presented.

2,837 citations

Journal ArticleDOI
TL;DR: In this article, a review of additive manufacturing (AM) techniques for producing metal parts are explored, with a focus on the science of metal AM: processing defects, heat transfer, solidification, solid-state precipitation, mechanical properties and post-processing metallurgy.
Abstract: Additive manufacturing (AM), widely known as 3D printing, is a method of manufacturing that forms parts from powder, wire or sheets in a process that proceeds layer by layer. Many techniques (using many different names) have been developed to accomplish this via melting or solid-state joining. In this review, these techniques for producing metal parts are explored, with a focus on the science of metal AM: processing defects, heat transfer, solidification, solid-state precipitation, mechanical properties and post-processing metallurgy. The various metal AM techniques are compared, with analysis of the strengths and limitations of each. Only a few alloys have been developed for commercial production, but recent efforts are presented as a path for the ongoing development of new materials for AM processes.

1,713 citations