Antonio Capone

Bio: Antonio Capone is an academic researcher from Polytechnic University of Milan. The author has contributed to research in topics: Wireless network & Neutrino. The author has an hindex of 50, co-authored 411 publications receiving 9406 citations. Previous affiliations of Antonio Capone include University of Milan & Sapienza University of Rome.

ADHOC MAC: new MAC architecture for ad hoc networks providing efficient and reliable point-to-point and broadcast services

Abstract: Ad-hoc networking, though an attractive solution for many applications, still has many unsolved issues, such as the hiddenterminal problem, flexible and prompt access, QoS provisioning, and efficient broadcast service. In this paper we present a MAC architecture able to solve the above issues in environments with no power consumption limitations, such as networks for inter-vehicle communications. This new architecture is based on a completely distributed access technique, RR-ALOHA, capable of dynamically establishing, for each active terminal in the network, a reliable single-hop broadcast channel on a slotted/framed structure. Though the proposed architecture uses a slotted channel it can be adapted to operate on the physical layer of different standards, including the UMTS Terrestrial Radio Access TDD, and IEEE 802.11. The paper presents the mechanisms that compose the new MAC: the basic RR-ALOHA protocol, an efficient broadcast service and the reservation of point-to-point channels that exploit parallel transmissions. Some basic performance figures are discussed to prove the effectiveness of the protocol.

OpenState: programming platform-independent stateful openflow applications inside the switch

Abstract: Software Defined Networking envisions smart centralized controllers governing the forwarding behavior of dumb low-cost switches. But are "dumb" switches an actual strategic choice, or (at least to some extent) are they a consequence of the lack of viable alternatives to OpenFlow as programmatic data plane forwarding interface? Indeed, some level of (programmable) control logic in the switches might be beneficial to offload logically centralized controllers (de facto complex distributed systems) from decisions just based on local states (versus network-wide knowledge), which could be handled at wire speed inside the device itself. Also, it would reduce the amount of flow processing tasks currently delegated to specialized middleboxes. The underlying challenge is: can we devise a stateful data plane programming abstraction (versus the stateless OpenFlow match/action table) which still entails high performance and remains consistent with the vendors' preference for closed platforms? We posit that a promising answer revolves around the usage of extended finite state machines, as an extension (super-set) of the OpenFlow match/action abstraction. We concretely turn our proposed abstraction into an actual table-based API, and, perhaps surprisingly, we show how it can be supported by (mostly) reusing core primitives already implemented in OpenFlow devices.

Planning UMTS base station location: optimization models with power control and algorithms

Abstract: Classical coverage models, adopted for second-generation cellular systems, are not suited for planning Universal Mobile Telecommunication System (UMTS) base station (BS) location because they are only based on signal predictions and do not consider the traffic distribution, the signal quality requirements, and the power control (PC) mechanism. We propose discrete optimization models and algorithms aimed at supporting the decisions in the process of planning where to locate new BSs. These models consider the signal-to-interference ratio as quality measure and capture at different levels of detail the signal quality requirements and the specific PC mechanism of the wideband CDMA air interface. Given that these UMTS BS location models are nonpolynomial (NP)-hard, we propose two randomized greedy procedures and a tabu search algorithm for the uplink (mobile to BS) direction which is the most stringent one from the traffic point of view in the presence of balanced connections such as voice calls. The different models, which take into account installation costs, signal quality and traffic coverage, and the corresponding algorithms, are compared on families of small to large-size instances generated by using classical propagation models.

Efficient polling schemes for Bluetooth picocells

Abstract: Bluetooth is a new low-cost wireless technology that is going to play an important role in communications among small electronic devices and the access to wired networking infrastructure. Bluetooth stations that communicate directly form a piconet. In a piconet one station has the role of master and the others are slaves. The access to the medium is based on a TDD (time division duplexing) scheme controlled by the master. The master sends packets to slaves in even-numbered slots triggering a transmission from slaves in the subsequent slot. Slaves are allowed to send packets only in response to a master packet. The way in which the master schedules packets transmission to slaves or polls them determines system performance. We consider the problem of designing an efficient and simple polling and scheduling scheme for Bluetooth. We propose some practical schemes and compare their performance with some ideal schemes derived from known results for polling systems.

Phd by thesis

Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

The Observation of Gravitational Waves from a Binary Black Hole Merger

Abstract: On September 14, 2015 at 09:50:45 UTC the two detectors of the Laser Interferometer Gravitational-Wave Observatory simultaneously observed a transient gravitational-wave signal. The signal sweeps upwards in frequency from 35 to 250 Hz with a peak gravitational-wave strain of 1.0×10(-21). It matches the waveform predicted by general relativity for the inspiral and merger of a pair of black holes and the ringdown of the resulting single black hole. The signal was observed with a matched-filter signal-to-noise ratio of 24 and a false alarm rate estimated to be less than 1 event per 203,000 years, equivalent to a significance greater than 5.1σ. The source lies at a luminosity distance of 410(-180)(+160) Mpc corresponding to a redshift z=0.09(-0.04)(+0.03). In the source frame, the initial black hole masses are 36(-4)(+5)M⊙ and 29(-4)(+4)M⊙, and the final black hole mass is 62(-4)(+4)M⊙, with 3.0(-0.5)(+0.5)M⊙c(2) radiated in gravitational waves. All uncertainties define 90% credible intervals. These observations demonstrate the existence of binary stellar-mass black hole systems. This is the first direct detection of gravitational waves and the first observation of a binary black hole merger.

Software-Defined Networking: A Comprehensive Survey

Abstract: The Internet has led to the creation of a digital society, where (almost) everything is connected and is accessible from anywhere. However, despite their widespread adoption, traditional IP networks are complex and very hard to manage. It is both difficult to configure the network according to predefined policies, and to reconfigure it to respond to faults, load, and changes. To make matters even more difficult, current networks are also vertically integrated: the control and data planes are bundled together. Software-defined networking (SDN) is an emerging paradigm that promises to change this state of affairs, by breaking vertical integration, separating the network's control logic from the underlying routers and switches, promoting (logical) centralization of network control, and introducing the ability to program the network. The separation of concerns, introduced between the definition of network policies, their implementation in switching hardware, and the forwarding of traffic, is key to the desired flexibility: by breaking the network control problem into tractable pieces, SDN makes it easier to create and introduce new abstractions in networking, simplifying network management and facilitating network evolution. In this paper, we present a comprehensive survey on SDN. We start by introducing the motivation for SDN, explain its main concepts and how it differs from traditional networking, its roots, and the standardization activities regarding this novel paradigm. Next, we present the key building blocks of an SDN infrastructure using a bottom-up, layered approach. We provide an in-depth analysis of the hardware infrastructure, southbound and northbound application programming interfaces (APIs), network virtualization layers, network operating systems (SDN controllers), network programming languages, and network applications. We also look at cross-layer problems such as debugging and troubleshooting. In an effort to anticipate the future evolution of this new paradigm, we discuss the main ongoing research efforts and challenges of SDN. In particular, we address the design of switches and control platforms—with a focus on aspects such as resiliency, scalability, performance, security, and dependability—as well as new opportunities for carrier transport networks and cloud providers. Last but not least, we analyze the position of SDN as a key enabler of a software-defined environment.

On the capacity of a cellular CDMA system

Abstract: It is shown that, particularly for terrestrial cellular telephony, the interference-suppression feature of CDMA (code division multiple access) can result in a many-fold increase in capacity over analog and even over competing digital techniques. A single-cell system, such as a hubbed satellite network, is addressed, and the basic expression for capacity is developed. The corresponding expressions for a multiple-cell system are derived. and the distribution on the number of users supportable per cell is determined. It is concluded that properly augmented and power-controlled multiple-cell CDMA promises a quantum increase in current cellular capacity. >