Antônio Luthierre Gama Cavalcante

Bio: Antônio Luthierre Gama Cavalcante is an academic researcher from Federal University of Ceará. The author has contributed to research in topics: Chemistry & Lipase. The author has an hindex of 2, co-authored 5 publications receiving 28 citations.

Current Status and Future Perspectives of Supports and Protocols for Enzyme Immobilization

Abstract: The market for industrial enzymes has witnessed constant growth, which is currently around 7% a year, projected to reach $10.5 billion in 2024. Lipases are hydrolase enzymes naturally responsible for triglyceride hydrolysis. They are the most expansively used industrial biocatalysts, with wide application in a broad range of industries. However, these biocatalytic processes are usually limited by the low stability of the enzyme, the half-life time, and the processes required to solve these problems are complex and lack application feasibility at the industrial scale. Emerging technologies create new materials for enzyme carriers and sophisticate the well-known immobilization principles to produce more robust, eco-friendlier, and cheaper biocatalysts. Therefore, this review discusses the trending studies and industrial applications of the materials and protocols for lipase immobilization, analyzing their advantages and disadvantages. Finally, it summarizes the current challenges and potential alternatives for lipases at the industrial level.

Taguchi design-assisted co-immobilization of lipase A and B from Candida antarctica onto chitosan: Characterization, kinetic resolution application, and docking studies

Abstract: In the present communication, the simultaneous co-immobilization by covalent binding of lipase A from Candida antarctica (CALA) and lipase B from Candida antarctica (CALB) in glutaraldehyde (GLU) activated chitosan (CHI) was optimized using the Taguchi method. Under optimized conditions (pH 9, 5 mM, 6:1 (protein load/g of support and 1 h), it was possible to reach 80.00 ± 0.01% for the immobilization yield (IY) and 46.01 ± 0.35 U/g for the activity of the derivative (AtD); in this case, load protein and ionic strength were the only statistically significant parameters and, therefore, those that most influenced the immobilization process. Furthermore, at pH 7, CALA-CALB-CHI had a half-life 2–6 times longer than the mixture of CALA and CALB for a temperature range of 50−80 °C. CALA-CALB showed the highest activity at pH 7, whereas CALA-CALB-CHI, except at pH 7, was more active than the soluble lipase mixture in the pH range (5–9), especially at pH 9. CHI, CHI-GLU, and CALA-CALB-CHI were characterized by X-ray powder diffraction (XRPD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Thermogravimetry (TGA), and Energy Dispersive Spectroscopy (EDS), proving the immobilization of CALA and CALB in chitosan. CALA-CALB-CHI derivative evaluated in the kinetic resolution of halohydrins acetates rac-2-bromo-1-(2-chlorophenyl) ethyl acetate (2a) and rac-2-chloro-1-(2,4-dichlorophenyl) ethyl acetate (2b), to produce the corresponding halohydrins 3a-b, which are intermediates in the synthesis of the drugs chlorprelanine (antiarrhythmic) and luliconazol (antifungal), respectively. (S)-bromohydrin 3a was obtained with 79% enantiomeric excess (ee), whereas (S)-chlorohydrin 3b produced with 98% ee, conversion of 46% and E > 200. Additionally, molecular docking was performed to elucidate the hydrolysis interaction reaction between β-halohydrin acetates and lipases CALA-CALB.

Designing of Nanomaterials-Based Enzymatic Biosensors: Synthesis, Properties, and Applications

Abstract: Among the many biological entities employed in the development of biosensors, enzymes have attracted the most attention. Nanotechnology has been fostering excellent prospects in the development of enzymatic biosensors, since enzyme immobilization onto conductive nanostructures can improve characteristics that are crucial in biosensor transduction, such as surface-to-volume ratio, signal response, selectivity, sensitivity, conductivity, and biocatalytic activity, among others. These and other advantages of nanomaterial-based enzymatic biosensors are discussed in this work via the compilation of several reports on their applications in different industrial segments. To provide detailed insights into the state of the art of this technology, all the relevant concepts around the topic are discussed, including the properties of enzymes, the mechanisms involved in their immobilization, and the application of different enzyme-derived biosensors and nanomaterials. Finally, there is a discussion around the pressing challenges in this technology, which will be useful for guiding the development of future research in the area.

Chemical modification of clay nanocomposites for the improvement of the catalytic properties of Lipase A from Candida antarctica

Abstract: Kaolin is a mineral composed of hydrated aluminum silicates, clayey and with high bioavailability. The choice of this mineral as immobilization matrix took into account these aspects mentioned above and its high surface area conducive to enzymatic immobilization, containing many OH- binding groups on its surface. Subsequently, the kaolin was functionalized with carboxymethylcellulose and polyethyleneimine (K-CMC-BPEI) and activated with Glutaraldehyde (K-CMC-BPEI-GLU) as a support to immobilize CAL-A. The [email protected] was characterized by X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetry (TGA), and Scanning Electron Microscopy (SEM). [email protected], in the temperature range of 50–80 ºC, has a half-life 2–3 times longer than soluble CAL-A, that is, the immobilization process conferred greater stability thermal to the biocatalyst. Furthermore, docking studies showed that the immobilization of CAL-A on the support surface was favorable, since CAL-A has binding affinity to the protein-anchored ligand, estimated at −4.3 to −3.7 kcal/mol. Experiments were performed to verify the catalytic potential of [email protected] at a kinetic resolution of rac-1-(triisopropylsilyl) penta-1,4-diyn-3-ol (1) in an organic medium via an acylation reaction. All experiments yielded the product ((R)-1-Ac) with an excellent enantiomeric excess (ee >99%) and enantioselectivity (E > 200).

Current Status and Future Perspectives of Supports and Protocols for Enzyme Immobilization

Abstract: The market for industrial enzymes has witnessed constant growth, which is currently around 7% a year, projected to reach $10.5 billion in 2024. Lipases are hydrolase enzymes naturally responsible for triglyceride hydrolysis. They are the most expansively used industrial biocatalysts, with wide application in a broad range of industries. However, these biocatalytic processes are usually limited by the low stability of the enzyme, the half-life time, and the processes required to solve these problems are complex and lack application feasibility at the industrial scale. Emerging technologies create new materials for enzyme carriers and sophisticate the well-known immobilization principles to produce more robust, eco-friendlier, and cheaper biocatalysts. Therefore, this review discusses the trending studies and industrial applications of the materials and protocols for lipase immobilization, analyzing their advantages and disadvantages. Finally, it summarizes the current challenges and potential alternatives for lipases at the industrial level.

Biodiesel production from microalgae using lipase-based catalysts: Current challenges and prospects

Abstract: The excessive demand for fossil fuels has caused severe environmental impacts, such as GHG-related effects and widespread pollution. Firstly, it is essential to identify the main problems arising from fossil fuel production and consumption, which will enable the search and implementation of technological, sustainable, and economical alternatives to mitigate the current issue. With the modern technological advances in this specific area, the use of biofuels has expanded, given their high potential of production from diverse classes of biomass. Producing biodiesel from microalgae oil specifically, as a way of obtaining clean and renewable energy, can play a significant role in this context, and the process is of high interest to the energy sector. Biodiesels are produced through mixtures of ethyl esters or fatty acid methyl esters, which are generated by the synthesis of oil with alcohol in the presence of the enzyme alcohol lipase. There are clear challenges linked to the new technologies employed to obtain biofuels from microalgae, and there also are strong prospects to these approaches, since they are very energy-efficient and environmentally friendly. Thus being, the present review describes the main aspects associated with biodiesel production from microalgae, highlighting the fundamentals of the technique, the immobilization processes followed, the use of solvents to optimize reaction media, bioreactor systems, as well as the performance optimization of microalgae biodiesel-based engines, while considering important economic and environmental aspects. Future trends in the biofuel scientific research and industry are also included, aiming at fostering discussions on the development of other significant advances in the use of microalgae lipase and oil technology for biodiesel production.

Taguchi design-assisted co-immobilization of lipase A and B from Candida antarctica onto chitosan: Characterization, kinetic resolution application, and docking studies

Abstract: In the present communication, the simultaneous co-immobilization by covalent binding of lipase A from Candida antarctica (CALA) and lipase B from Candida antarctica (CALB) in glutaraldehyde (GLU) activated chitosan (CHI) was optimized using the Taguchi method. Under optimized conditions (pH 9, 5 mM, 6:1 (protein load/g of support and 1 h), it was possible to reach 80.00 ± 0.01% for the immobilization yield (IY) and 46.01 ± 0.35 U/g for the activity of the derivative (AtD); in this case, load protein and ionic strength were the only statistically significant parameters and, therefore, those that most influenced the immobilization process. Furthermore, at pH 7, CALA-CALB-CHI had a half-life 2–6 times longer than the mixture of CALA and CALB for a temperature range of 50−80 °C. CALA-CALB showed the highest activity at pH 7, whereas CALA-CALB-CHI, except at pH 7, was more active than the soluble lipase mixture in the pH range (5–9), especially at pH 9. CHI, CHI-GLU, and CALA-CALB-CHI were characterized by X-ray powder diffraction (XRPD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Thermogravimetry (TGA), and Energy Dispersive Spectroscopy (EDS), proving the immobilization of CALA and CALB in chitosan. CALA-CALB-CHI derivative evaluated in the kinetic resolution of halohydrins acetates rac-2-bromo-1-(2-chlorophenyl) ethyl acetate (2a) and rac-2-chloro-1-(2,4-dichlorophenyl) ethyl acetate (2b), to produce the corresponding halohydrins 3a-b, which are intermediates in the synthesis of the drugs chlorprelanine (antiarrhythmic) and luliconazol (antifungal), respectively. (S)-bromohydrin 3a was obtained with 79% enantiomeric excess (ee), whereas (S)-chlorohydrin 3b produced with 98% ee, conversion of 46% and E > 200. Additionally, molecular docking was performed to elucidate the hydrolysis interaction reaction between β-halohydrin acetates and lipases CALA-CALB.

Taguchi design-assisted co-immobilization of lipase A and B from Candida antarctica onto chitosan: Characterization, kinetic resolution application, and docking studies

Abstract: In the present communication, the simultaneous co-immobilization by covalent binding of lipase A from Candida antarctica (CALA) and lipase B from Candida antarctica (CALB) in glutaraldehyde (GLU) activated chitosan (CHI) was optimized using the Taguchi method. Under optimized conditions (pH 9, 5 mM, 6:1 (protein load/g of support and 1 h), it was possible to reach 80.00 ± 0.01% for the immobilization yield (IY) and 46.01 ± 0.35 U/g for the activity of the derivative (AtD); in this case, load protein and ionic strength were the only statistically significant parameters and, therefore, those that most influenced the immobilization process. Furthermore, at pH 7, CALA-CALB-CHI had a half-life 2–6 times longer than the mixture of CALA and CALB for a temperature range of 50−80 °C. CALA-CALB showed the highest activity at pH 7, whereas CALA-CALB-CHI, except at pH 7, was more active than the soluble lipase mixture in the pH range (5–9), especially at pH 9. CHI, CHI-GLU, and CALA-CALB-CHI were characterized by X-ray powder diffraction (XRPD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Thermogravimetry (TGA), and Energy Dispersive Spectroscopy (EDS), proving the immobilization of CALA and CALB in chitosan. CALA-CALB-CHI derivative evaluated in the kinetic resolution of halohydrins acetates rac-2-bromo-1-(2-chlorophenyl) ethyl acetate (2a) and rac-2-chloro-1-(2,4-dichlorophenyl) ethyl acetate (2b), to produce the corresponding halohydrins 3a-b, which are intermediates in the synthesis of the drugs chlorprelanine (antiarrhythmic) and luliconazol (antifungal), respectively. (S)-bromohydrin 3a was obtained with 79% enantiomeric excess (ee), whereas (S)-chlorohydrin 3b produced with 98% ee, conversion of 46% and E > 200. Additionally, molecular docking was performed to elucidate the hydrolysis interaction reaction between β-halohydrin acetates and lipases CALA-CALB.