scispace - formally typeset
Search or ask a question
Author

Antonio Nanni

Bio: Antonio Nanni is an academic researcher from University of Miami. The author has contributed to research in topics: Fibre-reinforced plastic & Flexural strength. The author has an hindex of 62, co-authored 500 publications receiving 16867 citations. Previous affiliations of Antonio Nanni include Missouri University of Science and Technology & University of Minnesota.


Papers
More filters
01 Jan 2002
TL;DR: The Emerging Technology Series as mentioned in this paper is a series of information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members, with a focus on the development and appropriate use of new and emerging technologies.
Abstract: *Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.

2,963 citations

Proceedings ArticleDOI
18 Apr 2005
TL;DR: The guide for the design and construction of concrete reinforced with FRP bars is published by the American Concrete Institute (ACI) as discussed by the authors, which has been used as the internal reinforcement in concrete members to replace conventional steel rebars.
Abstract: This paper reports on the key features of the “Guide for the Design and Construction of Concrete Reinforced with FRP Bars” issued by the American Concrete Institute (ACI). For new construction, FRP bars have been used as the internal reinforcement in concrete members to replace conventional steel rebars for a host of reasons. The principles for design and construction were first established and proposed to industry in 2001. The third revision of the guide is now under preparation.

702 citations

Journal ArticleDOI
TL;DR: In this article, the authors present a review of the current research on shear strengthening with FRP and propose design algorithms to compute the contribution of FRP to the shear capacity of RC flexural members.
Abstract: Fiber reinforced polymer (FRP) materials are continuing to show great promise for use in strengthening reinforced concrete (RC) structures. These materials are an excellent option for use as external reinforcing because of their light weight, resistance to corrosion, and high strength. Externally bonded FRP sheets have been used to increase moment capacity of flexural members and to improve confinement in compression members. Investigations into the use of externally bonded FRP sheets for use in shear strengthening have also been conducted and have shown this to be a viable strengthening method. The objective of this study is to review the current research on shear strengthening with FRP and propose design algorithms to compute the contribution of FRP to the shear capacity of RC flexural members. Methods for computing the shear capacity based on the stress level to cause tensile fracture of the FRP sheet (which may be less than ultimate due to stress concentrations) and based on delamination of the sheet from the concrete surface are presented. Areas which have the potential for further development are also discussed.

570 citations

Journal ArticleDOI
TL;DR: A critical review of existing studies on the effects of using sea-sand and/or seawater as raw materials of concrete on the properties of the resulting concrete, including its workability, short and long-term strength as well as durability is presented in this paper.

471 citations

01 Jan 2006
TL;DR: The American Concrete Institute (ACI) as mentioned in this paper is a non-profit organization dedicated to the preservation and preservation of concrete artifacts and their use in the construction of concrete structures.
Abstract: Copyright © 2006, American Concrete Institute. All rights reserved including rights of reproduction and use in any form or by any means, including the making of copies by any photo process, or by electronic or mechanical device, printed, written, or oral, or recording for sound or visual reproduction or for use in any knowledge or retrieval system or device, unless permission in writing is obtained from the copyright proprietors.

462 citations


Cited by
More filters
Reference EntryDOI
31 Oct 2001
TL;DR: The American Society for Testing and Materials (ASTM) as mentioned in this paper is an independent organization devoted to the development of standards for testing and materials, and is a member of IEEE 802.11.
Abstract: The American Society for Testing and Materials (ASTM) is an independent organization devoted to the development of standards.

3,792 citations

01 Jan 2002
TL;DR: The Emerging Technology Series as mentioned in this paper is a series of information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members, with a focus on the development and appropriate use of new and emerging technologies.
Abstract: *Co-chairs of the subcommittee that prepared this document. Note: The committee acknowledges the contribution of associate member Paul Kelley. ACI encourages the development and appropriate use of new and emerging technologies through the publication of the Emerging Technology Series. This series presents information and recommendations based on available test data, technical reports, limited experience with field applications, and the opinions of committee members. The presented information and recommendations, and their basis, may be less fully developed and tested than those for more mature technologies. This report identifies areas in which information is believed to be less fully developed, and describes research needs. The professional using this document should understand the limitations of this document and exercise judgment as to the appropriate application of this emerging technology.

2,963 citations

01 Jan 2011
TL;DR: The Building Code Requirements for Structural Concrete (Code) as mentioned in this paper covers the materials, design, and construction of structural concrete used in buildings and where applicable in nonbuilding structures, including the strength evaluation of existing concrete structures.
Abstract: The “Building Code Requirements for Structural Concrete” (“Code”) covers the materials, design, and construction of structural concrete used in buildings and where applicable in nonbuilding structures. The Code also covers the strength evaluation of existing concrete structures. Among the subjects covered are: contract documents; inspection; materials; durability requirements; concrete quality, mixing, and placing; formwork; embedded pipes; construction joints; reinforcement details; analysis and design; strength and serviceability; flexural and axial loads; shear and torsion; development and splices of reinforcement; slab systems; walls; footings; precast concrete; composite flexural members; prestressed concrete; shells and folded plate members; strength evaluation of existing structures; provisions for seismic design; structural plain concrete; strut-and-tie modeling in Appendix A; alternative design provisions in Appendix B; alternative load and strength reduction factors in Appendix C; and anchoring to concrete in Appendix D. The quality and testing of materials used in construction are covered by reference to the appropriate ASTM standard specifications. Welding of reinforcement is covered by reference to the appropriate American Welding Society (AWS) standard. Uses of the Code include adoption by reference in general building codes, and earlier editions have been widely used in this manner. The Code is written in a format that allows such reference without change to its language. Therefore, background details or suggestions for carrying out the requirements or intent of the Code portion cannot be included. The Commentary is provided for this purpose. Some of the considerations of the committee in developing the Code portion are discussed within the Commentary, with emphasis given to the explanation of new or revised provisions. Much of the research data referenced in preparing the Code is cited for the user desiring to study individual questions in greater detail. Other documents that provide suggestions for carrying out the requirements of the Code are also cited.

2,239 citations

Journal ArticleDOI
TL;DR: In this article, the utilization of fly ash in construction, as a low-cost adsorbent for the removal of organic compounds, flue gas and metals, light weight aggregate, mine back fill, road sub-base, and zeolite synthesis is discussed.

2,117 citations

01 Jan 2016
TL;DR: The properties of concrete is universally compatible with any devices to read, and is available in the digital library an online access to it is set as public so you can download it instantly.
Abstract: Thank you for downloading properties of concrete. As you may know, people have look hundreds times for their chosen readings like this properties of concrete, but end up in malicious downloads. Rather than reading a good book with a cup of coffee in the afternoon, instead they juggled with some malicious virus inside their computer. properties of concrete is available in our digital library an online access to it is set as public so you can download it instantly. Our digital library hosts in multiple locations, allowing you to get the most less latency time to download any of our books like this one. Merely said, the properties of concrete is universally compatible with any devices to read.

1,701 citations