Antonio Napoli

Bio: Antonio Napoli is an academic researcher from Infinera. The author has contributed to research in topics: Computer science & Transmission (telecommunications). The author has an hindex of 27, co-authored 177 publications receiving 2855 citations. Previous affiliations of Antonio Napoli include Polytechnic University of Turin & Nokia Networks.

DSP for Coherent Single-Carrier Receivers

Abstract: In this paper, we outline the design of signal processing (DSP) algorithms with blind estimation for 100-G coherent optical polarization-diversity receivers in single-carrier systems. As main degrading optical propagation effects, we considered chromatic dispersion (CD), polarization-mode dispersion (PMD), polarization-dependent loss (PDL), and cross-phase modulation (XPM). In the context of this work, we developed algorithms to increase the robustness of the single DSP receiver modules against the aforesaid propagation effects. In particular, we first present a new and fast algorithm to perform blind adaptive CD compensation through frequency-domain equalization. This low complexity equalizer component inherits a highly precise estimation of residual dispersion independent from previous or subsequent blocks. Next, we introduce an original dispersion-tolerant timing recovery and illustrate the derivation of blind polarization demultiplexing, capable to operate also in condition of high PDL. At last, we propose an XPM-mitigating carrier phase recovery as an extension of the standard Viterbi-Viterbi algorithm.

Next generation sliceable bandwidth variable transponders

Abstract: This article reports the work on next generation transponders for optical networks carried out within the last few years. A general architecture supporting super-channels (i.e., optical connections composed of several adjacent subcarriers) and sliceability (i.e., subcarriers grouped in a number of independent super-channels with different destinations) is presented. Several transponder implementations supporting different transmission techniques are considered, highlighting advantages, economics, and complexity. Discussions include electronics, optical components, integration, and programmability. Application use cases are reported.

800G DSP ASIC Design Using Probabilistic Shaping and Digital Sub-Carrier Multiplexing

Abstract: The design of application-specific integrated circuits (ASIC) is at the core of modern ultra-high-speed transponders employing advanced digital signal processing (DSP) algorithms. This manuscript discusses the motivations for jointly utilizing transmission techniques such as probabilistic shaping and digital sub-carrier multiplexing in digital coherent optical transmissions systems. First, we describe the key-building blocks of modern high-speed DSP-based transponders working at up to 800G per wave. Second, we show the benefits of these transmission methods in terms of system level performance. Finally, we report, to the best of our knowledge, the first long-haul experimental transmission – e.g., over 1000 km – with a real-time 7 nm DSP ASIC and digital coherent optics (DCO) capable of data rates up to 1.6 Tb/s using two waves (2 × 800G).

Assessment on the Achievable Throughput of Multi-Band ITU-T G.652.D Fiber Transmission Systems

Abstract: Fiber-optic multi-band transmission (MBT) aims at exploiting the low-loss spectral windows of single-mode fibers (SMFs) for data transport, expanding by $\sim\!11\times$ the available bandwidth of C-band line systems and by $\sim\!5\times$ C+L-band line systems’. MBT offers a high potential for cost-efficient throughput upgrades of optical networks, even in absence of available dark-fibers, as it utilizes more efficiently the existing infrastructures. This represents the main advantage compared to approaches such as multi-mode/-core fibers or spatial division multiplexing. Furthermore, the industrial trend is clear: the first commercial C $+$ L-band systems are entering the market and research has moved toward the neighboring S-band. This article discusses the potential and challenges of MBT covering the ITU-T optical bands O $\rightarrow$ L. MBT performance is assessed by addressing the generalized SNR (GSNR) including both the linear and non-linear fiber propagation effects. Non-linear fiber propagation is taken into account by computing the generated non-linear interference by using the generalized Gaussian-noise (GGN) model, which takes into account the interaction of non-linear fiber propagation with stimulated Raman scattering (SRS), and in general considers wavelength-dependent fiber parameters. For linear effects, we hypothesize typical components’ figures and discussion on components’ limitations, such as transceivers,’ amplifiers’ and filters’ are not part of this work. We focus on assessing the transmission throughput that is realistic to achieve by using feasible multi-band components without specific optimizations and implementation discussion. So, results are meant to address the potential throughput scaling by turning-on excess fiber transmission bands. As transmission fiber, we focus exclusively on the ITU-T G.652.D, since it is the most widely deployed fiber type worldwide and the mostly suitable to multi-band transmission, thanks to its ultra-wide low-loss single-mode high-dispersion spectral region. Similar analyses could be carried out for other single-mode fiber types. We estimate a total single-fiber throughput of 450 Tb/s over a distance of 50 km and 220 Tb/s over regional distances of 600 km: $\sim\!10\times$ and 8× more than C-band transmission respectively and $\sim\!2.5\times$ more than full C+L.

Data-Aided Versus Blind Single-Carrier Coherent Receivers

Abstract: Fiber-optic research in signal processing for the first generation of coherent communication systems was dominated by receivers with blind adaptation. Next-generation systems will require a scalable and modular design for higher order modulation formats. Due to the nature of the fiber channel and the required parallelization in high-speed receivers, data-aided and blind algorithms call for a general reassessment when used in coherent optic receivers employing higher order modulation formats. In this paper, blind and data-aided receivers are compared for coherent single-carrier optical systems in terms of complexity, tracking ability, and convergence speed. Methods for equalization are discussed for time-domain- and frequency-domain-based receivers covering the most important algorithms. The general superiority of data-aided frequency-domain equalization is demonstrated.

Space-division multiplexing in optical fibres

Abstract: This Review summarizes the simultaneous transmission of several independent spatial channels of light along optical fibres to expand the data-carrying capacity of optical communications. Recent results achieved in both multicore and multimode optical fibres are documented.

Survey on Free Space Optical Communication: A Communication Theory Perspective

Abstract: Optical wireless communication (OWC) refers to transmission in unguided propagation media through the use of optical carriers, i.e., visible, infrared (IR), and ultraviolet (UV) bands. In this survey, we focus on outdoor terrestrial OWC links which operate in near IR band. These are widely referred to as free space optical (FSO) communication in the literature. FSO systems are used for high rate communication between two fixed points over distances up to several kilometers. In comparison to radio-frequency (RF) counterparts, FSO links have a very high optical bandwidth available, allowing much higher data rates. They are appealing for a wide range of applications such as metropolitan area network (MAN) extension, local area network (LAN)-to-LAN connectivity, fiber back-up, backhaul for wireless cellular networks, disaster recovery, high definition TV and medical image/video transmission, wireless video surveillance/monitoring, and quantum key distribution among others. Despite the major advantages of FSO technology and variety of its application areas, its widespread use has been hampered by its rather disappointing link reliability particularly in long ranges due to atmospheric turbulence-induced fading and sensitivity to weather conditions. In the last five years or so, there has been a surge of interest in FSO research to address these major technical challenges. Several innovative physical layer concepts, originally introduced in the context of RF systems, such as multiple-input multiple-output communication, cooperative diversity, and adaptive transmission have been recently explored for the design of next generation FSO systems. In this paper, we present an up-to-date survey on FSO communication systems. The first part describes FSO channel models and transmitter/receiver structures. In the second part, we provide details on information theoretical limits of FSO channels and algorithmic-level system design research activities to approach these limits. Specific topics include advances in modulation, channel coding, spatial/cooperative diversity techniques, adaptive transmission, and hybrid RF/FSO systems.

Digital Coherent Optical Receivers: Algorithms and Subsystems

Abstract: Digital coherent receivers have caused a revolution in the design of optical transmission systems, due to the subsystems and algorithms embedded within such a receiver. After giving a high-level overview of the subsystems, the optical front end, the analog-to-digital converter (ADC) and the digital signal processing (DSP) algorithms, which relax the tolerances on these subsystems are discussed. Attention is then turned to the compensation of transmission impairments, both static and dynamic. The discussion of dynamic-channel equalization, which forms a significant part of the paper, includes a theoretical analysis of the dual-polarization constant modulus algorithm, where the control surfaces several different equalizer algorithms are derived, including the constant modulus, decision-directed, trained, and the radially directed equalizer for both polarization division multiplexed quadriphase shift keyed (PDM-QPSK) and 16 level quadrature amplitude modulation (PDM-16-QAM). Synchronization algorithms employed to recover the timing and carrier phase information are then examined, after which the data may be recovered. The paper concludes with a discussion of the challenges for future coherent optical transmission systems.

Space-division multiplexing: the next frontier in optical communication

Abstract: Space-division multiplexing (SDM) uses multiplicity of space channels to increase capacity for optical communication. It is applicable for optical communication in both free space and guided waves. This paper focuses on SDM for fiber-optic communication using few-mode fibers or multimode fibers, in particular on the critical challenge of mode crosstalk. Multiple-input–multiple-output (MIMO) equalization methods developed for wireless communication can be applied as an electronic method to equalize mode crosstalk. Optical approaches, including differential modal group delay management, strong mode coupling, and multicore fibers, are necessary to bring the computational complexity for MIMO mode crosstalk equalization to practical levels. Progress in passive devices, such as (de)multiplexers, and active devices, such as amplifiers and switches, which are considered straightforward challenges in comparison with mode crosstalk, are reviewed. Finally, we present the prospects for SDM in optical transmission and networking.

6×56-Gb/s mode-division multiplexed transmission over 33-km few-mode fiber enabled by 6×6 MIMO equalization

Abstract: Mode-division multiplexing over 33-km few-mode fiber is investigated. It is shown that 6×6 MIMO processing can be used to almost completely compensate for crosstalk and intersymbol interference due to mode coupling in a system that transmits uncorrelated 28-GBaud QPSK signals on the six spatial and polarization modes supported by a novel few-mode fiber.