The modular multilevel converter (MMC) has been a subject of increasing importance for medium/high-power energy conversion systems. Over the past few years, significant research has been done to address the technical challenges associated with the operation and control of the MMC. In this paper, a general overview of the basics of operation of the MMC along with its control challenges are discussed, and a review of state-of-the-art control strategies and trends is presented. Finally, the applications of the MMC and their challenges are highlighted.

Operation, Control, and Applications of the Modular Multilevel Converter: A Review

This paper describes a modified phase-shifted carrier-based pulsewidth-modulation (PSC-PWM) scheme for modular multilevel converters (MMC). In order to reduce the average device switching frequency, a reduced switching-frequency (RSF) voltage balancing algorithm is developed. This paper also proposes a circulating current suppressing controller (CCSC) to minimize the inner circulating current in an MMC. Based on the double line-frequency, negative-sequence rotational frame, the three-phase alternative circulating currents are decomposed into two dc components and are minimized by a pair of proportional integral controllers. Simulation results based on a detailed PSCAD/EMTDC model prove the effectiveness of the modified PSC-PWM method and the RSF voltage-balancing algorithm. The proposed CCSC not only eliminates the inner circulating current but also improves the quality of the converter ac output voltage. A simple loss evaluation demonstrates that the RSF voltage-balancing algorithm and the CCSC reduce the converter power losses.

Reduced Switching-Frequency Modulation and Circulating Current Suppression for Modular Multilevel Converters

Modular multilevel converters have several attractive features such as a modular structure, the capability of transformer-less operation, easy scalability in terms of voltage and current, low expense for redundancy and fault tolerant operation, high availability, utilization of standard components, and excellent quality of the output waveforms. These features have increased the interest of industry and research in this topology, resulting in the development of new circuit configurations, converter models, control schemes, and modulation strategies. This paper presents a review of the latest achievements of modular multilevel converters regarding the mentioned research topics, new applications, and future trends.

Circuit topologies, modeling, control schemes, and applications of modular multilevel converters

In this paper, the principle of modularity is used to derive the different multilevel voltage and current source converter topologies. The paper is primarily focused on high-power applications and specifically on high-voltage dc systems. The derived converter cells are treated as building blocks and are contributing to the modularity of the system. By combining the different building blocks, i.e., the converter cells, a variety of voltage and current source modular multilevel converter topologies are derived and thoroughly discussed. Furthermore, by applying the modularity principle at the system level, various types of high-power converters are introduced. The modularity of the multilevel converters is studied in depth, and the challenges as well as the opportunities for high-power applications are illustrated.

Modular Multilevel Converters for HVDC Applications: Review on Converter Cells and Functionalities

The number of semiconductor switches in a modular multilevel converter (MMC) for HVDC transmission is typically two orders of magnitudes larger than that in a two or three level voltage-sourced converter (VSC). The large number of devices creates a computational challenge for electromagnetic transient simulation programs, as it can significantly increase the simulation time. The paper presents a method based on partitioning the system's admittance matrix and deriving an efficient time-varying Thevenin's equivalent for the converter part. The proposed method does not make use of approximate interfaced models, and mathematically, is exactly equivalent to modelling the entire network (converter and external system) as one large network. It is shown to drastically reduce the computational time without sacrificing any accuracy. The paper also presents control algorithms and other modelling aspects. The efficacy of the proposed method is demonstrated by simulating a point-to-point VSC-MMC-based HVDC transmission system.

/pdf/efficient-modeling-of-modular-multilevel-hvdc-converters-mmc-j1tm8tzxo3.pdf

Efficient Modeling of Modular Multilevel HVDC Converters (MMC) on Electromagnetic Transient Simulation Programs

This paper discusses the impact of modulation on stability issues of the Modular Multilevel Converter (M2C) The main idea is to describe the operation of this converter system mathematically, and suggest a control method that offers stable operation in the whole operation range A possible approach is to as­sume a continuous model, where all the modules in each arm are represented by variable voltage sources, and as a result, all pulse width modulation effects are disregarded After simulating this model and test­ing different control methods, useful conclusions on the operation of the M2C have been extracted The control methods are then implemented on a model with discrete half-bridge modules, in order to compare the results and to validate the continuous model approach When assuring that this model functions as expected, the goal of this paper is to conclude into a self-stabilizing voltage controller A controller is proposed, which eliminates circulating currents between the phase legs and balances the arm voltages regardless of the imposed alteranting current

On dynamics and voltage control of the Modular Multilevel Converter

Theory for the dynamics of modular multilevel converters is developed in this paper. It is shown that the sum capacitor voltage in each arm often can be considered instead of the individual capacitor voltages, thereby significantly reducing the complexity of the system model. Two selections of the so-called insertion indices, which both compensate for the sum-capacitor-voltage ripples, are considered. The dynamic systems which respectively result from these selections are analyzed. An effective dc-bus model, which takes into account the contribution from the submodule capacitors, is obtained. Finally, explicit formulas for the stationary sum-capacitor-voltage ripples are derived.

Dynamic Analysis of Modular Multilevel Converters

The fundamental frequency component in the arm currents of a modular multilevel converter is a necessity for the operation of the converter, as is the connection and bypassing of the submodules. Inevitably, this will cause alternating components in the capacitor voltages. This paper investigates how the arm currents and capacitor voltages interact when the submodules are connected and bypassed in a sinusoidal manner. Equations that describe the circulating current that is caused by the variations in the total inserted voltage are derived. Resonant frequencies are identified and the resonant behaviour is verified by experimental results. It is also found that the effective values of the arm resistance and submodule capacitances can be extracted from the measurements by least square fitting of the analytical expressions to the measured values. Finally, the analytical expression for the arm currents is verified by experimental results.

Steady-State Analysis of Interaction Between Harmonic Components of Arm and Line Quantities of Modular Multilevel Converters

The internal control of a modular multilevel converter aims to equalize and stabilize the submodule capacitor voltages independent of the loading conditions. It has been shown that a submodule selection mechanism, included in the modulator, can provide voltage sharing inside the converter arm. Several procedures for controlling the total stored energy in each converter arm exist. A new approach is described in this paper. It is based on estimation of the stored energy in the arms by combining the converter electromotive force reference, the measured alternating output current, and the known direct voltage. No feedback controllers are used. Experimental verification on a three-phase 10 kVA prototype is presented along with the description of the new procedure.

Open-Loop Control of Modular Multilevel Converters Using Estimation of Stored Energy

This paper presents a new modulation method for the modular multilevel converter. The proposed method is based on a fixed pulse pattern where harmonic elimination methods can be applied. In the proposed modulation method, the pulse pattern is chosen in such a way that the stored energy in each submodule remains stable. It is shown that this can be done at the fundamental switching frequency without measuring the capacitor voltages or using any other form of feedback control. Such a modulation scheme has not been presented before. The theoretical results are verified by both simulations and experimental results. The simulation results show successful operation at the fundamental switching frequency with a larger number of submodules. When a smaller number of submodules are used, harmonic elimination methods may be applied. This is verified experimentally on a converter with eight submodules per phase leg. The experimental results verify that stable operation can be maintained at the fundamental switching frequency while successfully eliminating the fifth harmonic in the ac-side voltage.

Antonios Antonopoulos

Papers

On dynamics and voltage control of the Modular Multilevel Converter

Dynamic Analysis of Modular Multilevel Converters

Steady-State Analysis of Interaction Between Harmonic Components of Arm and Line Quantities of Modular Multilevel Converters

Open-Loop Control of Modular Multilevel Converters Using Estimation of Stored Energy

A New Modulation Method for the Modular Multilevel Converter Allowing Fundamental Switching Frequency