Anvar A. Zakhidov

Bio: Anvar A. Zakhidov is an academic researcher from University of Texas at Dallas. The author has contributed to research in topics: Perovskite (structure) & Carbon nanotube. The author has an hindex of 63, co-authored 417 publications receiving 27644 citations. Previous affiliations of Anvar A. Zakhidov include University of Texas System & Business International Corporation.

White light emission from a blue polymer light emitting diode combined with YAG:Ce3+ nanoparticles

Abstract: It is reported the white light emission from a hybrid polymer light emitting diode (HyPLED) which has a film of YAG:Ce3+ nanoparticles. This white light is produced due to the combination of the blue light generated from a PLED and the green-yellow light coming from YAG:Ce3+ nanoparticles. This white light has CIE (International Commission on Illumination) coordinates of (0.31, 0.35) which is near of the ideal coordinate of (0.33, 0.33). The hybrid device presents a turn on voltage of 4 V, as well as a maximum luminance and efficiency of 266 cd m−2 and 0.34 cd A−1 (at 9 V), respectively. Finally, it was possible to tune the color emission from green to bluish-white by changing the operation voltage.

Enhanced Thermoelectric Properties of Poly(3-hexylthiophene) through the Incorporation of Aligned Carbon Nanotube Forest and Chemical Treatments.

Abstract: Carbon nanotube/polymer composites have recently received considerable attention for thermoelectric (TE) applications. The TE power factor can be significantly improved by forming composites with carbon nanotubes. However, the formation of a uniform and well-ordered nanocomposite film is still challenging because of the creation of agglomerates and the uneven distribution of nanotubes. Here, we developed a facile, efficient, and easy-processable route to produce uniform and aligned nanocomposite films of P3HT and carbon nanotube forest (CNTF). The electrical conductivity of a pristine P3HT film was improved from ∼10-7 to 160 S/cm thanks to the presence of CNTF. Also, a further boost in TE performance was achieved using two additives, lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) and tert-butylpyridine. By adding the additives to P3HT, the degree of interchain order increased, which facilitated the charge transport through the composite. Under the optimal conditions, the incorporation of CNTF and additives led to values of the Seebeck coefficient, electrical conductivity, and power factor up to rising 92 μV/K, 130 S/cm, and 110 μW/m K2, respectively, at a temperature of 344.15 K. The excellent TE performance of the hybrid films originates from the dramatically increased electrical conductivity and the improved Seebeck coefficient by CNTF and additives, respectively.

Photoinduced Migration of Ions in Optically Resonant Perovskite Nanoparticles

Abstract: Organic–inorganic perovskites with a mixed anion composition are widely used in solar cells, light-emitting diodes, and nanophotonic structures. Light nanosources based on resonant perovskite nanoparticles are of particular interest. However, perovskites with such a composition demonstrate the light-induced segregation of anions, which leads to a reversible dynamic rearrangement of the optical properties of a material and photoluminescence spectra. In this work, the photoinduced process of change in optical properties in resonant hybrid perovskite nanoparticles with a mixed anion composition (MAPbBr1.5I1.5, where MA = NH3CH 3 + ) has been studied. Comparison with a similar process in a perovskite thin film with a similar composition has shown that the photoinduced migration of halogen ions in a nanoparticle occurs cyclically. This is due to the competition of two processes: the concentration of ions near the boundaries of the particle and migration caused by the gradient of the density of light-generated electron–hole pairs. This effect in resonant nanoparticles makes it possible to obtain optically tunable nanoantennas.

Charge transfer in fullerene-conducting polymer composite: Electronic and excitonic properties

Abstract: C60 doping into conducting polymer with highly extended π-electron system in the main chain induces remarkable quenching of photoluminescence in conducting polymer and drastic enhancement of photoconductivity. These results can be explained in terms of photo-induced charge transfer between conducting polymer and C60. That is, photoexcited excitons or exciton-polarons on conducting polymer are effectively dissociated at C60 molecules transferring electrons to C60. Photoexcitation of C60 results in the transfer of hole from C60 to conducting polymer. These novel C60 doping effects have been observed not only in conducting polymers with non-degenerated ground state structures but also those with degenerated ground state structure such as di-substituted acetylene polymers with solitonic electronic systems. Highly effective photo-induced charge transfer has been also observed in conducting polymer/C60 heterojunctions, which are interpreted as donor (D)-acceptor (A) photocell. Based on this finding we ...

Electric Field Effect in Atomically Thin Carbon Films

Abstract: We describe monocrystalline graphitic films, which are a few atoms thick but are nonetheless stable under ambient conditions, metallic, and of remarkably high quality. The films are found to be a two-dimensional semimetal with a tiny overlap between valence and conductance bands, and they exhibit a strong ambipolar electric field effect such that electrons and holes in concentrations up to 10 13 per square centimeter and with room-temperature mobilities of ∼10,000 square centimeters per volt-second can be induced by applying gate voltage.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Carbon Nanotubes--the Route Toward Applications

Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.