Arif Demir

Bio: Arif Demir is an academic researcher from Kocaeli University. The author has contributed to research in topics: Laser & X-ray laser. The author has an hindex of 19, co-authored 74 publications receiving 1383 citations. Previous affiliations of Arif Demir include University of Essex.

Experimental and theoretical investigation of the drilling of alumina ceramic using Nd:YAG pulsed laser

Abstract: Alumina ceramics have found wide range of applications from semiconductors, communication technologies, medical devices, automotive to aerospace industries. Processing of alumina ceramics is rather difficult due to its high degree of brittleness, hardness, low thermal diffusivity and conductivity. Rapid improvements in laser technologies in recent years make the laser among the most convenient processing tools for difficult-to-machine materials such as hardened metals, ceramics and composites. This is particularly evident as lasers have become an inexpensive and controllable alternative to conventional hole drilling methods. This paper reports theoretical and experimental results of drilling the alumina ceramic with thicknesses of 5 mm and 10.5 mm using milisecond pulsed Nd:YAG laser. Effects of the laser peak power, pulse duration, repetition rate and focal plane position have been determined using optical and Scanning Electron Microscopy (SEM) images taken from cross-sections of the drilled alumina ceramic samples. In addition to dimensional analysis of the samples, microstructural investigations have also been examined. It has been observed that, the depth of the crater can be controlled as a function of the peak power and the pulse duration for a single laser pulse application without any defect. Crater depth can be increased by increasing the number of laser pulses with some defects. In addition to experimental work, conditions have been simulated using ANYS FLUENT package providing results, which are in good agreement with the experimental results.

Saturated operation of a transient collisional x-ray laser

Abstract: Saturation of a low pump energy x-ray laser utilizing a transient inversion mechanism on the $3p\ensuremath{-}3s$ transition at 32.63 nm in Ne-like Ti has been demonstrated. A close to saturation amplification was simultaneously achieved for the $3d\ensuremath{-}3p,$ $J=\stackrel{\ensuremath{\rightarrow}}{1}1$ transition at 30.15 nm. Small signal effective transient gain coefficients of $g\ensuremath{\sim}46$ and $\ensuremath{\sim}35{\mathrm{cm}}^{\mathrm{\ensuremath{-}}1}$ and gain-length products of 16.7 and 16.9 for these lines were obtained. Experiments demonstrate that it is possible to achieve saturated laser action in a transient regime with Ne-like Ti for a pump energy as low as $\ensuremath{\sim}5\mathrm{J}.$

Evaluation of PMMA joining to stainless steel 304 using pulsed Nd:YAG laser

Abstract: This paper reports an experimental study of welding of dissimilar materials between transparent Polymethylmethacrylate (PMMA) and stainless steel 304 sheets using a pulsed mode Nd:YAG laser The process was carried out for two cases; laser transmission joining (LTJ) and conduction joining (CJ) The former is achieved when the joint is irradiated from the polymer side and the latter when the joint is irradiated from the opposite side (metal side) The light and process parameters represented by the peak power (Pp), pulse duration (τ), pulse repetition rate (PRR), scanning speed (ν) and pulse shape have a significant effect on the joint strength (Fb), joint bead width (b), joint quality and appearance The optimum parameters were determined according to joint quality, joint strength and bead width The optimum results for the joint strength and bead width for both LTJ and CJ are 925 N, 725 mm and 495 N, 8 mm respectively using a rectangular pulse shape (RC) Further modeling studies were carried out based on two methods; one factor at a time method (OFM) and surface response methodology (RSM) method RSM was used to determine optimum parameters for the experimental data building mathematical models for correlating parameters and responses (Fb and b) as well as to investigate how different parameters interact with each other and their effect on the weld quality

Plasma-liquid interactions: A review and roadmap

Abstract: Plasma–liquid interactions represent a growing interdisciplinary area of research involving plasma science, fluid dynamics, heat and mass transfer, photolysis, multiphase chemistry and aerosol science. This review provides an assessment of the state-of-the-art of this multidisciplinary area and identifies the key research challenges. The developments in diagnostics, modeling and further extensions of cross section and reaction rate databases that are necessary to address these challenges are discussed. The review focusses on non-equilibrium plasmas.

Molecular mechanism mediating proliferation, defferentiation interralationships during progressie development of the osteoblast phenotype

Abstract: I. Introduction A FUNCTIONAL relationship between cell growth and the initiation and progression of events associated with differentiation has been a fundamental question challenging developmental biologists for more than a century. In the case of bone, as observed with other cells and tissue, the relationship of growth and differentiation must be maintained and stringently regulated, both during development and throughout the life of the organism, to support tissue remodeling. For many years, bone was defined anatomically and examined largely in a descriptive manner by ultrastructural analysis and by biochemical and histochemical methods. These studies provided the basis for our understanding of bone tissue organization and orchestration of the progressive recruitment, proliferation, and differentiation of the various cellular components of bone tissue. Now, complemented by an increased knowledge of molecular mechanisms that are associated with and regulate expression of genes encoding phenotypic compone...

Laser Synthesis and Processing of Colloids: Fundamentals and Applications

Abstract: Driven by functionality and purity demand for applications of inorganic nanoparticle colloids in optics, biology, and energy, their surface chemistry has become a topic of intensive research interest. Consequently, ligand-free colloids are ideal reference materials for evaluating the effects of surface adsorbates from the initial state for application-oriented nanointegration purposes. After two decades of development, laser synthesis and processing of colloids (LSPC) has emerged as a convenient and scalable technique for the synthesis of ligand-free nanomaterials in sealed environments. In addition to the high-purity surface of LSPC-generated nanoparticles, other strengths of LSPC include its high throughput, convenience for preparing alloys or series of doped nanomaterials, and its continuous operation mode, suitable for downstream processing. Unscreened surface charge of LSPC-synthesized colloids is the key to achieving colloidal stability and high affinity to biomolecules as well as support materials,...

Petawatt class lasers worldwide

Abstract: The use of ultra-high intensity laser beams to achieve extreme material states in the laboratory has become almost routine with the development of the petawatt laser. Petawatt class lasers have been constructed for specific research activities, including particle acceleration, inertial confinement fusion and radiation therapy, and for secondary source generation (x-rays, electrons, protons, neutrons and ions). They are also now routinely coupled, and synchronized, to other large scale facilities including megajoule scale lasers, ion and electron accelerators, x-ray sources and z-pinches. The authors of this paper have tried to compile a comprehensive overview of the current status of petawatt class lasers worldwide. The definition of ‘petawatt class’ in this context is a laser that delivers .

Pure and multi metal oxide nanoparticles: synthesis, antibacterial and cytotoxic properties

Abstract: Th antibacterial activity of metal oxide nanoparticles has received marked global attention as they can be specifically synthesized to exhibit significant toxicity to bacteria. The importance of their application as antibacterial agents is evident keeping in mind the limited range and effectiveness of antibiotics, on one hand, and the plethora of metal oxides, on the other, along with the propensity of nanoparticles to induce resistance being much lower than that of antibiotics. Effective inhibition against a wide range of bacteria is well known for several nano oxides consisting of one metal (Fe3O4, TiO2, CuO, ZnO), whereas, research in the field of multi-metal oxides still demands extensive exploration. This is understandable given that the relationship between physicochemical properties and biological activity seems to be complex and difficult to generalize even for metal oxide nanoparticles consisting of only one metal component. Also, despite the broad scope that metal oxide nanoparticles have as antibacterial agents, there arise problems in practical applications taking into account the cytotoxic effects. In this respect, the consideration of polymetallic oxides for biological applications becomes even greater since these can provide synergetic effects and unify the best physicochemical properties of their components. For instance, strong antibacterial efficiency specific of one metal oxide can be complemented by non-cytotoxicity of another. This review presents the main methods and technological advances in fabrication of nanostructured metal oxides with a particular emphasis to multi-metal oxide nanoparticles, their antibacterial effects and cytotoxicity.