Arnoldus Jan Storm

Bio: Arnoldus Jan Storm is an academic researcher from Carl Zeiss AG. The author has contributed to research in topics: Extreme ultraviolet lithography & Layer (electronics). The author has an hindex of 10, co-authored 24 publications receiving 2311 citations. Previous affiliations of Arnoldus Jan Storm include Delft University of Technology.

Fabrication of solid-state nanopores with single-nanometre precision.

Abstract: Single nanometre-sized pores (nanopores) embedded in an insulating membrane are an exciting new class of nanosensors for rapid electrical detection and characterization of biomolecules. Notable examples include α-hemolysin protein nanopores in lipid membranes1,2 and solid-state nanopores3 in Si3N4. Here we report a new technique for fabricating silicon oxide nanopores with single-nanometre precision and direct visual feedback, using state-of-the-art silicon technology and transmission electron microscopy. First, a pore of 20 nm is opened in a silicon membrane by using electron-beam lithography and anisotropic etching. After thermal oxidation, the pore can be reduced to a single-nanometre when it is exposed to a high-energy electron beam. This fluidizes the silicon oxide leading to a shrinking of the small hole due to surface tension. When the electron beam is switched off, the material quenches and retains its shape. This technique dramatically increases the level of control in the fabrication of a wide range of nanodevices.

Translocation of double-strand DNA through a silicon oxide nanopore

Abstract: We report double-strand DNA translocation experiments using silicon oxide nanopores with a diameter of about 10 nm . By monitoring the conductance of a voltage-biased pore, we detect molecules with a length ranging from 6557 to 48 500 base pairs. We find that the molecules can pass the pore both in a straight linear fashion and in a folded state. Experiments on circular DNA further support this picture. We sort the molecular events according to their folding state and estimate the folding position. As a proof-of-principle experiment, we show that a nanopore can be used to distinguish the lengths of DNA fragments present in a mixture. These experiments pave the way for quantitative analytical techniques with solid-state nanopores.

Insulating behavior for DNA molecules between nanoelectrodes at the 100 nm length scale.

Abstract: Electrical transport measurements are reported for double-stranded DNA molecules located between nanofabricated electrodes. We observe the absence of any electrical conduction through these DNA-based devices, both at the single-molecule level as well as for small bundles of DNA. We obtain a lower bound of 10 TΩ for the resistance of a DNA molecule at length scales larger than 40 nm. It is concluded that DNA is insulating. This conclusion is based on an extensive set of experiments in which we varied key parameters such as the base-pair sequence [mixed sequence and homogeneous poly(dG)⋅poly(dC)], length between contacts (40–500 nm), substrate (SiO2 or mica), electrode material (gold or platinum), and electrostatic doping fields. Discrepancies with other reports in the literature are discussed.

Particle cleaning of optical elements for microlithography

Abstract: An optical assembly serves the purpose of being mounted in a projection exposure apparatus (101) for EUV microlithography and comprises at least one vacuum chamber (70, 71, 68a), at least one optical element (6, 7; 65, 66; 63) arranged in the vacuum chamber (70, 71, 68a), the optical element (6, 7; 65, 66; 63) having an optical surface (18) which may be impinged upon by a useful beam bundle (3) of the projection exposure apparatus (101), and a cleaning device (72) for cleaning the optical surface (18). The cleaning device (72) is configured to perform particle cleaning of the optical surface (18) at a gas pressure within the vacuum chamber (70,71, 68a) which is higher than a vacuum pressure (p0) for performing an exposure operation with the projection exposure apparatus (101). The result is an optical assembly capable of providing optical elements having an optical surface which may be impinged upon by a useful beam bundle which can be cleaned reliably from foreign particles.

Kinetics of reduction of a RuO2(110) film on Ru(0001) by H 2

Abstract: The kinetics and mechanism of the full reduction of a thin RuO2 film with a stoichiometric (110) surface on Ru(0001) by H2 has been studied in the temperature range of 100 to 400 C at 10-2 to 10 -4 Pa. The reduction kinetics is dominated by the creation of oxygen vacancies and their annihilation upon transformation of RuO2 into metallic Ru. The temperature-dependent reduction rate increases linearly with H2 pressure. In the temperature range of 100 up to 200 C, initially hydrogenation of the RuO2(110) surface occurs. Next, oxygen vacancies are created due to desorption of water vapor, which accelerates the reduction by place exchange of oxygen bulk atoms with an activation energy of 0.45 eV. In the temperature range of 200 to 300 C, slow reduction of RuO2 by H2 already occurs in the initial period with an activation energy of 0.48 eV and is followed by faster reduction. In the temperature range of 300 to 400 C, the reduction of RuO2 starts immediately when exposed to H2 and the activation energy (0.48 eV) is similar to the activation energy in the lower temperature range (100 to 200 C). Apparently, the annihilation of oxygen vacancies during reduction is more prominent with increasing temperature. © 2012 American Chemical Society.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials

Abstract: Recently a new, large family of two-dimensional (2D) early transition metal carbides and carbonitrides, called MXenes, was discovered. MXenes are produced by selective etching of the A element from the MAX phases, which are metallically conductive, layered solids connected by strong metallic, ionic, and covalent bonds, such as Ti2AlC, Ti3AlC2, and Ta4AlC3. MXenes ­combine the metallic conductivity of transition metal carbides with the hydrophilic nature of their hydroxyl or oxygen terminated surfaces. In essence, they behave as “conductive clays”. This article reviews progress—both ­experimental and theoretical—on their synthesis, structure, properties, intercalation, delamination, and potential applications. MXenes are expected to be good candidates for a host of applications. They have already shown promising performance in electrochemical energy storage systems. A detailed outlook for future research on MXenes is also presented.

The Potential and Challenges of Nanopore Sequencing

Abstract: A nanopore-based device provides single-molecule detection and analytical capabilities that are achieved by electrophoretically driving molecules in solution through a nano-scale pore. The nanopore provides a highly confined space within which single nucleic acid polymers can be analyzed at high throughput by one of a variety of means, and the perfect processivity that can be enforced in a narrow pore ensures that the native order of the nucleobases in a polynucleotide is reflected in the sequence of signals that is detected. Kilobase length polymers (single-stranded genomic DNA or RNA) or small molecules (e.g., nucleosides) can be identified and characterized without amplification or labeling, a unique analytical capability that makes inexpensive, rapid DNA sequencing a possibility. Further research and development to overcome current challenges to nanopore identification of each successive nucleotide in a DNA strand offers the prospect of 'third generation' instruments that will sequence a diploid mammalian genome for ∼$1,000 in ∼24 h.

Integrated Nanoparticle–Biomolecule Hybrid Systems: Synthesis, Properties, and Applications

Abstract: Nanomaterials, such as metal or semiconductor nanoparticles and nanorods, exhibit similar dimensions to those of biomolecules, such as proteins (enzymes, antigens, antibodies) or DNA. The integration of nanoparticles, which exhibit unique electronic, photonic, and catalytic properties, with biomaterials, which display unique recognition, catalytic, and inhibition properties, yields novel hybrid nanobiomaterials of synergetic properties and functions. This review describes recent advances in the synthesis of biomolecule-nanoparticle/nanorod hybrid systems and the application of such assemblies in the generation of 2D and 3D ordered structures in solutions and on surfaces. Particular emphasis is directed to the use of biomolecule-nanoparticle (metallic or semiconductive) assemblies for bioanalytical applications and for the fabrication of bioelectronic devices.

Solid-state nanopores

Abstract: The passage of individual molecules through nanosized pores in membranes is central to many processes in biology. Previously, experiments have been restricted to naturally occurring nanopores, but advances in technology now allow artificial solid-state nanopores to be fabricated in insulating membranes. By monitoring ion currents and forces as molecules pass through a solid-state nanopore, it is possible to investigate a wide range of phenomena involving DNA, RNA and proteins. The solid-state nanopore proves to be a surprisingly versatile new single-molecule tool for biophysics and biotechnology.