Arthur W. Snow

Bio: Arthur W. Snow is an academic researcher from United States Naval Research Laboratory. The author has contributed to research in topics: Phthalocyanine & Nanoclusters. The author has an hindex of 33, co-authored 122 publications receiving 4153 citations. Previous affiliations of Arthur W. Snow include United States Department of the Navy.

Colloidal Metal−Insulator−Metal Ensemble Chemiresistor Sensor

Abstract: A colloidal metal−insulator−metal ensemble chemiresistor sensor based on a monolayer stabilized metal nanocluster transducer film is described. In the example presented, the thin transducer film is composed of 2-nm gold clusters encapsulated by octanethiol monolayers and is deposited on an interdigital microelectrode. Responses to organic vapor exposures are large (resistance changes up to 2-fold or more), fast (90% response in less than 1 s), reversible, and selective. Chemiresistor sorption isotherms for toluene, tetrachloroethylene, 1-propanol, and water vapors are nonlinear and illustrate the high sensitivity and selectivity (ppm detection for toluene and tetrachloroethylene; negligible response for 1-propanol and water).

Molecular Association and Monolayer Formation of Soluble Phthalocyanine Compounds.

Abstract: : A series of H2, Mg, VO, Co, Ni, Cu, Zn, Pd, Pt, Bi, and Pb 4, 4', 4'', 4'''-tetracumylpenoxy phthalocyanine, MPcXZ4, was synthesized. By vapor pressure osometry measurements of toluene solutions at 65 C, all MpcX4 compounds were dimeric complexes except PbPcX4 which is monomeric and Cu, Ni, Pd and PtPcX4 which form larger complexes ranging from 2.7 to 4.1 molecular units. Each MPcX4 forms a stable Langmuir-Blodgett monolayer to film pressures of 20 mN/m and force-area curves indicate a dense packing of phthalocyanine units with molecular areas increasing with complex size.

Syntheses and characterization of heteroatom-bridged metal-free phthalocyanine network polymers and model compounds

Abstract: Preparation a partir de bisphtalonitrile ponte avec de l'oxygene, du soufre ou du selenium. Insolubilite dans l'acide sulfurique indique une teneur elevee en phtalocyanine dans le polymere reticule ponte avec de l'oxygene. Les polymeres et composes modeles ont une resistivite electrique elevee et ne peuvent etre dopes par l'iode

Optical limiter using a lead phthalocyanine

Abstract: The performance of an optical limiter based on Pb‐tetrakis(cumylphenoxy)phthalocyanine, a robust organic material with a large χ(3) and figure of merit, χ(3)/α0, is described. In an f/5 limiter with a sample transmission of 0.68, the threshold for limiting was 8±2 nJ and the dynamic range was greater than a factor of 103. The threshold for the PbPc(CP)4 limiter was ∼15 times smaller and the high intensity transmission ∼4–5 times lower than an equivalent limiter based on a thermal nonlinearity.

Gold nanoparticles: assembly, supramolecular chemistry, quantum-size-related properties, and applications toward biology, catalysis, and nanotechnology.

Abstract: Although gold is the subject of one of the most ancient themes of investigation in science, its renaissance now leads to an exponentially increasing number of publications, especially in the context of emerging nanoscience and nanotechnology with nanoparticles and self-assembled monolayers (SAMs). We will limit the present review to gold nanoparticles (AuNPs), also called gold colloids. AuNPs are the most stable metal nanoparticles, and they present fascinating aspects such as their assembly of multiple types involving materials science, the behavior of the individual particles, size-related electronic, magnetic and optical properties (quantum size effect), and their applications to catalysis and biology. Their promises are in these fields as well as in the bottom-up approach of nanotechnology, and they will be key materials and building block in the 21st century. Whereas the extraction of gold started in the 5th millennium B.C. near Varna (Bulgaria) and reached 10 tons per year in Egypt around 1200-1300 B.C. when the marvelous statue of Touthankamon was constructed, it is probable that “soluble” gold appeared around the 5th or 4th century B.C. in Egypt and China. In antiquity, materials were used in an ecological sense for both aesthetic and curative purposes. Colloidal gold was used to make ruby glass 293 Chem. Rev. 2004, 104, 293−346

Gold nanoparticles in chemical and biological sensing.

Abstract: Detection of chemical and biological agents plays a fundamental role in biomedical, forensic and environmental sciences1–4 as well as in anti bioterrorism applications.5–7 The development of highly sensitive, cost effective, miniature sensors is therefore in high demand which requires advanced technology coupled with fundamental knowledge in chemistry, biology and material sciences.8–13 In general, sensors feature two functional components: a recognition element to provide selective/specific binding with the target analytes and a transducer component for signaling the binding event. An efficient sensor relies heavily on these two essential components for the recognition process in terms of response time, signal to noise (S/N) ratio, selectivity and limits of detection (LOD).14,15 Therefore, designing sensors with higher efficacy depends on the development of novel materials to improve both the recognition and transduction processes. Nanomaterials feature unique physicochemical properties that can be of great utility in creating new recognition and transduction processes for chemical and biological sensors15–27 as well as improving the S/N ratio by miniaturization of the sensor elements.28 Gold nanoparticles (AuNPs) possess distinct physical and chemical attributes that make them excellent scaffolds for the fabrication of novel chemical and biological sensors (Figure 1).29–36 First, AuNPs can be synthesized in a straightforward manner and can be made highly stable. Second, they possess unique optoelectronic properties. Third, they provide high surface-to-volume ratio with excellent biocompatibility using appropriate ligands.30 Fourth, these properties of AuNPs can be readily tuned varying their size, shape and the surrounding chemical environment. For example, the binding event between recognition element and the analyte can alter physicochemical properties of transducer AuNPs, such as plasmon resonance absorption, conductivity, redox behavior, etc. that in turn can generate a detectable response signal. Finally, AuNPs offer a suitable platform for multi-functionalization with a wide range of organic or biological ligands for the selective binding and detection of small molecules and biological targets.30–32,36 Each of these attributes of AuNPs has allowed researchers to develop novel sensing strategies with improved sensitivity, stability and selectivity. In the last decade of research, the advent of AuNP as a sensory element provided us a broad spectrum of innovative approaches for the detection of metal ions, small molecules, proteins, nucleic acids, malignant cells, etc. in a rapid and efficient manner.37 Figure 1 Physical properties of AuNPs and schematic illustration of an AuNP-based detection system. In this current review, we have highlighted the several synthetic routes and properties of AuNPs that make them excellent probes for different sensing strategies. Furthermore, we will discuss various sensing strategies and major advances in the last two decades of research utilizing AuNPs in the detection of variety of target analytes including metal ions, organic molecules, proteins, nucleic acids, and microorganisms.

Prospects of Colloidal Nanocrystals for Electronic and Optoelectronic Applications

Abstract: Nanocrystals (NCs) discussed in this Review are tiny crystals of metals, semiconductors, and magnetic material consisting of hundreds to a few thousand atoms each. Their size ranges from 2-3 to about 20 nm. What is special about this size regime that placed NCs among the hottest research topics of the last decades? The quantum mechanical coupling * To whom correspondence should be addressed. E-mail: dvtalapin@uchicago.edu. † The University of Chicago. ‡ Argonne National Lab. Chem. Rev. 2010, 110, 389–458 389

Recent advances in the liquid-phase syntheses of inorganic nanoparticles.

Abstract: The development of novel materials is a fundamental focal point of chemical research; and this interest is mandated by advancements in all areas of industry and technology. A good example of the synergism between scientific discovery and technological development is the electronics industry, where discoveries of new semiconducting materials resulted in the evolution from vacuum tubes to diodes and transistors, and eventually to miniature chips. The progression of this technology led to the development * To whom correspondence should be addressed. B.L.C.: (504) 2801385 (phone); (504) 280-3185 (fax); bcushing@uno.edu (e-mail). C.J.O.: (504)280-6846(phone);(504)280-3185(fax);coconnor@uno.edu (e-mail). 3893 Chem. Rev. 2004, 104, 3893−3946

J-aggregates: from serendipitous discovery to supramolecular engineering of functional dye materials.

Abstract: J-aggregates are of significant interest for organic materials conceived by supramolecular approaches. Their discovery in the 1930s represents one of the most important milestones in dye chemistry as well as the germination of supramolecular chemistry. The intriguing optical properties of J-aggregates (in particular, very narrow red-shifted absorption bands with respect to those of the monomer and their ability to delocalize and migrate excitons) as well as their prospect for applications have motivated scientists to become involved in this field, and numerous contributions have been published. This Review provides an overview on the J-aggregates of a broad variety of dyes (including cyanines, porphyrins, phthalocyanines, and perylene bisimides) created by using supramolecular construction principles, and discusses their optical and photophysical properties as well as their potential applications. Thus, this Review is intended to be of interest to the supramolecular, photochemistry, and materials science communities.