Author
Atefeh Abdolali
Other affiliations: University of Tehran
Bio: Atefeh Abdolali is an academic researcher from University of Technology, Sydney. The author has contributed to research in topics: Biosorption & Sorption. The author has an hindex of 6, co-authored 6 publications receiving 932 citations. Previous affiliations of Atefeh Abdolali include University of Tehran.
Papers
More filters
••
TL;DR: In this paper, the efficiency of each biosorbent has been discussed with respect to the operating conditions (e.g., temperature, hydraulic residence time, initial metal concentration, biosorbents particle size and its dosage), chemical modification on sorption capacity and preparation methods, as well as thermodynamics and kinetics.
368 citations
••
TL;DR: From the results obtained, the pseudo-second-order kinetic model best describes the biosorption of cadmium, nickel and lead ions.
315 citations
••
TL;DR: Desorption studies indicated that metal-loaded biosorbent could be used after three consecutive sorption, desorption and regeneration cycles by applying a semi-simulated real wastewater.
198 citations
••
TL;DR: This novel MMBB can effectively be utilized as an adsorbent to remove heavy metal ions from aqueous solutions and calculated thermodynamic parameters indicated feasible, spontaneous and exothermic biosorption process.
125 citations
••
TL;DR: The effectiveness of regeneration step by 1 M CaCl2 on five successive cycles of sorption and desorption displays this multi-metal binding biosorbent (MMBB) can effectively be utilized as an adsorbent to remove heavy metal ions from aqueous solutions in five cycles of Sorption/desorption/regeneration.
109 citations
Cited by
More filters
••
TL;DR: In this article, low-cost byproducts from agricultural, household and industrial sectors have been recognized as a sustainable solution for wastewater treatment, which allow achieving the removal of pollutants from wastewater and at the same time to contribute to the waste minimization, recovery and reuse.
1,105 citations
••
TL;DR: This review focuses on the utilization of cellulose as an adsorbent in natural/modified form or as a precursor for activated carbon (AC) for adsorbing substances from water and reports a few controversies and unresolved questions concerning the preparation/properties of ACs from cellulose.
529 citations
••
TL;DR: This review evaluates the use of adsorbents from four major categories: agricultural waste; naturally-occurring soil and mineral deposits; aquatic and terrestrial biomass; and other locally-available waste materials.
490 citations
••
TL;DR: In this article, the effect of various operating factors such as: adsorbent dose, contact time, solution pH, initial concentration and temperature on the sorption of heavy metal ions of Cu(II, Zn(II), Cd( II), Co(II and Pb(II) were carried out using the commercial active carbon Purolite AC 20 and biochar.
392 citations
••
TL;DR: In this paper, the efficiency of each biosorbent has been discussed with respect to the operating conditions (e.g., temperature, hydraulic residence time, initial metal concentration, biosorbents particle size and its dosage), chemical modification on sorption capacity and preparation methods, as well as thermodynamics and kinetics.
368 citations