Avi Zadok

Bio: Avi Zadok is an academic researcher from Bar-Ilan University. The author has contributed to research in topics: Brillouin scattering & Optical fiber. The author has an hindex of 27, co-authored 176 publications receiving 2409 citations. Previous affiliations of Avi Zadok include California Institute of Technology & University of Alcalá.

Vector analysis of stimulated Brillouin scattering amplification in standard single-mode fibers

Abstract: The polarization properties of stimulated Brillouin scattering (SBS) amplification or attenuation in standard single-mode fibers are examined through vectorial analysis, simulation and experiment. Vector propagation equations for the signal wave, incorporating SBS and birefringence, are derived and analyzed in both the Jones and Stokes spaces. The analysis shows that in the undepleted pump regime, the fiber may be regarded as a polarization-dependent gain (or loss) medium, having two orthogonal input SOPs, and corresponding two orthogonal output SOPs, for the signal, which, respectively, provide the signal with maximum and minimum SBS amplification (or attenuation). Under high Brillouin gain conditions and excluding zero-probability cases, the output SOP of arbitrarily polarized input signals, would tend to converge towards that of maximum SBS gain. In the case of high SBS attenuation the output SOP of an arbitrarily polarized signal would approach the output SOP corresponding to minimum attenuation. It is found that for a wide range of practical pump powers (<= 100 mW) and for sufficiently long fibers with typical SBS and birefringence parameters, the signal aligned for maximum SBS interaction will enter/emerge from the fiber with its electric field closely tracing the same ellipse in space as that of the pump at the corresponding side of the fiber, albeit with the opposite sense of rotation. The analytic predictions are experimentally demonstrated for both Stokes (amplification) and anti-Stokes (attenuation) signals.

Optomechanical sensing of liquids outside standard fibers using forward stimulated Brillouin scattering

Abstract: The analysis of chemical species is one of the most fundamental and long-standing challenges in fiber-optic sensors research. Existing sensor architectures require a spatial overlap between light and the substance being tested and rely either on structural modifications of standard fibers or on specialty photonic crystal fibers. In this work, we report an optomechanical fiber sensor that addresses liquids outside the cladding of standard, 8/125 μm single-mode fibers with no structural intervention. Measurements are based on forward stimulated Brillouin scattering by radial, guided acoustic modes of the fiber structure. The acoustic modes are stimulated by an optical pump pulse and probed by an optical signal wave, both confined to the core. The acoustic vibrations induce a nonreciprocal phase delay to the signal wave, which is monitored in a Sagnac interferometer loop configuration. The measured resonance frequencies and excitation strengths of individual modes agree with the predictions of a corresponding quantitative analysis. The acoustic reflectivity at the outer cladding boundary and the acoustic impedance of the surrounding medium are extracted from cavity lifetime measurements of multiple modes. The acoustic impedances of deionized water and ethanol are measured with better than 1% accuracy. The measurements successfully distinguish between aqueous solutions with 0, 4%, 8%, and 12% concentrations of dissolved salt. The new fiber-sensing paradigm might be used in the monitoring of industrial processes involving ionic solutions.

Electrically pumped hybrid evanescent Si/InGaAsP lasers.

Abstract: Hybrid Si/III-V, Fabry-Perot evanescent lasers are demonstrated, utilizing InGaAsP as the III-V gain material for the first time to our knowledge. The lasing threshold current of 300-μm-long devices was as low as 24 mA, with a maximal single facet output power of 4.2 mW at 15°C. Longer devices achieved a maximal single facet output power as high as 12.7 mW, a single facet slope efficiency of 8.4%, and a lasing threshold current density of 1 kA/cm^2. Continuous wave laser operation was obtained up to 45°C. The threshold current density, output power, and efficiency obtained improve upon those of previously reported devices having a similar geometry. Facet images indicate that the output light is largely confined to the Si waveguide.

On the various time constants of wavelength changes of a DFB laser under direct modulation

Abstract: The temporal behavior of the optical frequency emitted by several DFB lasers under direct square wave modulation was measured using an all-fiber implementation of a Mach-Zender interferometer with an imbalance of 30 ps. The impulse response of the optical frequency to injection current modulation was found to contain a time constant as short as 10-20 ns, together with a few longer ones. The existence of such a short time constant is consistent with a thermal analysis of a laser structure with finite thermal impedance of the active region and should be taken into consideration in various wide bandwidth applications of direct modulated semiconductor lasers.

Stimulated Brillouin scattering slow light in optical fibers [Invited]

Abstract: Stimulated Brillouin scattering (SBS) has become a favorable underlying mechanism in many demonstrations of all-optical variable delay in standard fibers, often referred to as slow and fast light. Over 100 journal papers and numerous conference sessions have been dedicated to SBS slow light since 2005. In this paper, recent research in this area is reviewed. Following a short introduction to the topic, several specific trends in contemporary work are highlighted: the optimization of the SBS pump spectrum for extended slow light delay and reduced pulse distortion; SBS slow light demonstrations in nonstandard, highly nonlinear fibers; applications of SBS slow light to the delay of analog waveforms; and the role of polarization. Finally, a brief concluding perspective is provided.

Statistical optics

Abstract: Course Description This is an advanced course in which we explore the field of Statistical Optics. Topics covered include such subjects as the statistical properties of natural (thermal) and laser light, spatial and temporal coherence, effects of partial coherence on optical imaging instruments, effects on imaging due to randomly inhomogeneous media, and a statistical treatment of the detection of light. Development of this more comprehensive model of the behavior of light draws upon the use of tools traditionally available to the electrical engineer, such as linear system theory and the theory of stochastic processes.

Nonreciprocal Light Propagation in a Silicon Photonic Circuit

Abstract: Optical communications and computing require on-chip nonreciprocal light propagation to isolate and stabilize different chip-scale optical components. We have designed and fabricated a metallic-silicon waveguide system in which the optical potential is modulated along the length of the waveguide such that nonreciprocal light propagation is obtained on a silicon photonic chip. Nonreciprocal light transport and one-way photonic mode conversion are demonstrated at the wavelength of 1.55 micrometers in both simulations and experiments. Our system is compatible with conventional complementary metal-oxide-semiconductor processing, providing a way to chip-scale optical isolators for optical communications and computing.

Polarization-sensitive low-coherence reflectometer for birefringence characterization and ranging

Abstract: We present a polarization-sensitive optical coherence-domain reflectometer capable of characterizing the phase retardation between orthogonal linear polarization modes at each reflection point in a birefringent sample. The device is insensitive to the rotation of the sample in the plane perpendicular to ranging. Phase measurement accuracy is ±0.86°, but the reflectometer can distinguish local variations in birefringence as small as 0.05° with a distance resolution of 10.8 μm and a dynamic range of 90 dB. Birefringence-sensitive ranging in a wave plate, an electro-optic modulator, and a calf coronary artery is demonstrated.

Microwave photonics

Abstract: Microwave photonics is an area that studies the generation, processing, control and transmission of microwave signals by means of photonics. In this paper, microwave photonics techniques developed in the past few years will be reviewed, with an emphasis on system architectures for microwave applications.

Applications of nonlinear fiber optics

Abstract: * The only book describing applications of nonlinear fiber optics * Two new chapters on the latest developments: highly nonlinear fibers and quantum applications* Coverage of biomedical applications* Problems provided at the end of each chapterThe development of new highly nonlinear fibers - referred to as microstructured fibers, holey fibers and photonic crystal fibers - is the next generation technology for all-optical signal processing and biomedical applications. This new edition has been thoroughly updated to incorporate these key technology developments.The book presents sound coverage of the fundamentals of lightwave technology, along with material on pulse compression techniques and rare-earth-doped fiber amplifiers and lasers. The extensively revised chapters include information on fiber-optic communication systems and the ultrafast signal processing techniques that make use of nonlinear phenomena in optical fibers.New material focuses on the applications of highly nonlinear fibers in areas ranging from wavelength laser tuning and nonlinear spectroscopy to biomedical imaging and frequency metrology. Technologies such as quantum cryptography, quantum computing, and quantum communications are also covered in a new chapter.This book will be an ideal reference for: RD scientists involved with research on fiber amplifiers and lasers; graduate students and researchers working in the fields of optical communications and quantum information. * The only book on how to develop nonlinear fiber optic applications* Two new chapters on the latest developments; Highly Nonlinear Fibers and Quantum Applications* Coverage of biomedical applications