On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells

The science and technology of ultracapacitors are reviewed for a number of electrode materials, including carbon, mixed metal oxides, and conducting polymers. More work has been done using microporous carbons than with the other materials and most of the commercially available devices use carbon electrodes and an organic electrolytes. The energy density of these devices is 3¯5 Wh/kg with a power density of 300¯500 W/kg for high efficiency (90¯95%) charge/discharges. Projections of future developments using carbon indicate that energy densities of 10 Wh/kg or higher are likely with power densities of 1¯2 kW/kg. A key problem in the fabrication of these advanced devices is the bonding of the thin electrodes to a current collector such the contact resistance is less than 0.1 cm2. Special attention is given in the paper to comparing the power density characteristics of ultracapacitors and batteries. The comparisons should be made at the same charge/discharge efficiency.

Ultracapacitors: Why, How, and Where is the Technology

1. Introduction 46372. Theoretical Methodologies and Simulation Tools 46402.1. Ab Initio Quantum Chemistry 46412.2. Molecular Dynamics 46422.2.1. Classical Molecular Dynamics and MonteCarlo Simulations46432.2.2. Empirical Valence Bond Models 46442.2.3. Ab Initio Molecular Dynamics (AIMD) 46452.3. Poisson−Boltzmann Theory 46452.4. Nonequilibrium Statistical Mechanical IonTransport Modeling46462.5. Dielectric Saturation 46473. Transport Mechanisms 46483.1. Proton Conduction Mechanisms 46483.1.1. Homogeneous Media 46483.1.2. Heterogeneous Systems (ConfinementEffects)46553.2. Mechanisms of Parasitic Transport 46613.2.1. Solvated Acidic Polymers 46613.2.2. Oxides 46654. Phenomenology of Transport inProton-Conducting Materials for Fuel-CellApplications46664.1. Hydrated Acidic Polymers 46664.2. PBI−H

/pdf/transport-in-proton-conductors-for-fuel-cell-applications-3gvrtpo4jv.pdf

Transport in proton conductors for fuel-cell applications: simulations, elementary reactions, and phenomenology.

The state-of-the-art of polymer electrolyte membrane fuel cell (PEMFC) technology is based on perfluorosulfonic acid (PFSA) polymer membranes operating at a typical temperature of 80 °C. Some of the key issues and shortcomings of the PFSA-based PEMFC technology are briefly discussed. These include water management, CO poisoning, hydrogen, reformate and methanol as fuels, cooling, and heat recovery. As a means to solve these shortcomings, high-temperature polymer electrolyte membranes for operation above 100 °C are under active development. This treatise is devoted to a review of the area encompassing modified PFSA membranes, alternative sulfonated polymer and their composite membranes, and acid−base complex membranes. PFSA membranes have been modified by swelling with nonvolatile solvents and preparing composites with hydrophilic oxides and solid proton conductors. DMFC and H2/O2(air) cells based on modified PFSA membranes have been successfully operated at temperatures up to 120 °C under ambient pressure...

/pdf/approaches-and-recent-development-of-polymer-electrolyte-1glbhokzz9.pdf

Approaches and Recent Development of Polymer Electrolyte Membranes for Fuel Cells Operating above 100 °C

Poly(ethylene oxide) (PEO) based materials are widely considered as promising candidates of polymer hosts in solid-state electrolytes for high energy density secondary lithium batteries. They have several specific advantages such as high safety, easy fabrication, low cost, high energy density, good electrochemical stability, and excellent compatibility with lithium salts. However, the typical linear PEO does not meet the production requirement because of its insufficient ionic conductivity due to the high crystallinity of the ethylene oxide (EO) chains, which can restrain the ionic transition due to the stiff structure especially at low temperature. Scientists have explored different approaches to reduce the crystallinity and hence to improve the ionic conductivity of PEO-based electrolytes, including blending, modifying and making PEO derivatives. This review is focused on surveying the recent developments and issues concerning PEO-based electrolytes for lithium-ion batteries.

Ayhan Bozkurt

Papers

Microwave synthesis and characterization of Zn-doped nickel ferrite nanoparticles

Proton Conducting Blends of Poly(4-vinylimidazole) with Phosphoric Acid

Alternatives toward proton conductive anhydrous membranes for fuel cells: Heterocyclic protogenic solvents comprising polymer electrolytes

Proton-conducting polymer electrolytes based on phosphoric acid

PAA/imidazol-based proton conducting polymer electrolytes